[Gianluca99]

Sembra che finalmente sia stato presentato ufficialmente il nuovo modello con modem integrato della Netgear, l'attesissimo DGND3700


Sito ufficiale: http://www.netgear.com/home/products.../DGND3700.aspx

Data sheet: http://www.netgear.com/images/DGND37...1018-17292.pdf






Immagine in alta definizione: LINK (TIF)


In particolare:

* All-in-one—High Speed ADSL2+ Modem (built-in) and WAN Gigabit Ethernet port for cable/fiber
* Powerful Dual Core (400 MHz each) processor
* Simultaneous Dual Band—2.4 GHz and 5 GHz operation
* Memory: 128 MB Flash and 128 MB RAM
* Five (5) (1 WAN, 4 LAN) Gigabit Ethernet ports

Originariamente inviato da zdnet

Manufacturer Suggested Retail Price is $199.99

Release date: June 2011

Fonte: LINK

Chipset: Broadcom 6368 LINK

Fonte: LINK

IPv6 support: It will not be provided on the NETGEAR DGND3700 with future releases firmware’s. They have stated that they will include the feature on the release of the NETGEAR DGND3700v2, with more stable hardware components. For as you are aware that the DGND3700 is experiencing a stability issue with regard to Internet connection. However, there is no ETA yet of the release of the DGND3700v2.

Fonte: LINK

Netgear Genie support: DGND3700 firmware hasn't been updated to support Genie yet, it should come in a few months.

Fonte: LINK

Mini Review: Overall, this is a product with great potential. It has great speed, good stability, nice looks and a boat load of features. If they polish off the few things Netgear seemed to have skimped on like including decent firmware, having a better circuitry layout and having better aligned heatsinks for it's main chips, this would then be an excellent product that I for one would definitely consider changing to from my beloved DGN2000.

Fonte: LINK

Review PcTuner.net (italiano)
http://www.pctuner.net/articoli/reti...-wi-fi-/6.html



Foto antenne & interno:

Originariamente inviato da io2

LINK IMMAGINE da review PCTUNER

Script Jdownloader per la riconnessione:

[[[HSRC]]]
    [[[STEP]]]
        [[[REQUEST]]]
            POST /st_poe.cgi HTTP/1.1
            Host: %%%routerip%%%
            Authorization: Basic %%%basicauth%%%

ConMethod=Disconnect
        [[[/REQUEST]]]
    [[[/STEP]]]
    [[[STEP]]][[[WAIT seconds="3"/]]][[[/STEP]]]
    [[[STEP]]]
        [[[REQUEST]]]
            POST /st_poe.cgi HTTP/1.1
            Host: %%%routerip%%%
            Authorization: Basic %%%basicauth%%%

ConMethod=++Connect++
        [[[/REQUEST]]]
    [[[/STEP]]]
[[[/HSRC]]]

Fonte: LINK


Problemi noti:

• Rilascio firmware aggiornati ogni 4 mesi (a partire da gennaio o dalla data di rilascio del prodotto?) FONTE
• Difficoltà nell'aggancio alla portante di linee non ADSL2+
• Mancanza di riconnessione automatica in caso di caduta della linea con alcune DSLAM FONTE

Problemi relativi al firmware V1.0.0.12 (FONTE):

• MTU unable to be set correctly for my ISP (Sky has an MTU of 1500, odd I know)
• Sky is in the process of changing from PPPoA to MER, this router does not work with Sky’s implementation of MER
• Using a large drive with lots of MP3s, the router frequently resets and looses access to the drive & contents
• Using a small drive, then router can still lose the drive connection and require the drive to be unplugged and rescanned before the contents can be accessed
• Using a single external drive unit with two drives, the router only sees one drive
• The Traffic Meter only records that a router was on for 23 hours and 59 minutes, despite actually being on 24 hours without interruption
• Email reporting is not working (same setup works with DGN2000)
• Unable to download the firmware stored on the Netgear website (works with another router)

firmware v1.0.0.17
LINK

1. Fixed - device reboot when upload file to root folder use FTP.
2. Fixed - readyshare to support HDD up to 3 or 4 TB.
3. Fixed - Show the success page after GUI wizard complete successfully.
4. Fixed - Primus DSL sync fail at ADSL 2+ and Auto.
5. Fixed - QoS always use the train rate as the max uplink bandwidth in xDSL mode.

firmware beta v1.0.020
LINK

News su Firmware 2.0

The firmware fixes for the IPv6 supports for DGND3700 will be release on the last week of December. Please wait until further notice for this firmware. Again, kindly accept our sincere apology. I will let John know regarding your reply and inform about the issue you have experienced on this.

You may visit the link provided below for more information regarding DGND3700:

http://support.netgear.com/app/produ...del/a_id/18165

Thanks again for choosing NETGEAR and happy holidays!

Sincerely,

**** *****
Level 2 Technical Support

FONTE

Vuoi ampliare la copertura wireless? Prova ad impostare Canada come paese nella sezione Wireless
Fonte: LINK

Come riconoscere il DGND3700v2 dal DGND3700v1: LINK

-ATTENZIONE-
Questo non è da ritenersi un topic ufficiale, se qualcuno è interessato a creare e gestire un thread ufficiale su questo router si faccia avanti.
Se siete interessati contattate il mod pegasolabs.
Potete utilizzare tutte le informazioni presenti in questo thread e nella pagina principale naturalmente.
Grazie