[negator136]

come previsto, al primo tentativo non ci sono riuscito...

queste sono le impostazioni che ho inserito:

==== Configuration will be created with these values :

  + User          : negator136@aliceadsl.it
  + Password      : (hidden)
  + Provider      : IT..Alice Telecom
      DNS 1       : 81.74.229.227
      DNS 2       : 151.99.125.1
  + VPI/VCI       : 8/35
  + Modem         : IPM Datacom Dataway USB
      GS chipset  : GS7470
      VID1/PID1   : 0915/8102
      VID2/PID2   : 0915/8102
      ALT SYNCH   : 5
      ALT PPPOECI : 1
  + .bin file     : /etc/eciadsl/synch01.bin
  + PPP mode      : VCM_RFC2364
  + use DHCP      : yes
  +use static IP : yes

questa una domanda a cui non ero sicuro sulla risposta:

Is DHCP used by your provider (MOST users should say NO)?
(y/n) y

e infine l'errore che da durante la connessione:

debian:/home/ale/Softwares# eciadsl-start

[EciAdsl 1/5] Setting up USB support...

Preliminary USB device filesystem is OK

[EciAdsl 2/5] Uploading firmware...

Process skipped .. no more needed
firmware loaded successfully

[EciAdsl 3/5] Synchronization...

ERROR eciadsl-synch SYNCHING: failed
ERROR eciadsl-synch: failed
Synchronization successful

[EciAdsl 4/5] Connecting to provider...

using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/pts/2
sent [LCP ConfReq id=0x1 <magic 0x58cde1b7>]
sent [LCP ConfReq id=0x1 <magic 0x58cde1b7>]
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x8102 -mode VCM_RFC2364 finished (pid 6761), status = 0x0
Modem hangup
Connection terminated.
using channel 2
Using interface ppp0
Connect: ppp0 <--> /dev/pts/3
sent [LCP ConfReq id=0x2 <magic 0xd71da113>]
sent [LCP ConfReq id=0x2 <magic 0xd71da113>]
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x8102 -mode VCM_RFC2364 finished (pid 6800), status = 0x0
Modem hangup
Connection terminated.
using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/pts/4
sent [LCP ConfReq id=0x3 <magic 0x2538ff48>]
sent [LCP ConfReq id=0x3 <magic 0x2538ff48>]
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x8102 -mode VCM_RFC2364 finished (pid 6826), status = 0x0
Modem hangup
Connection terminated.
using channel 4
Using interface ppp0
Connect: ppp0 <--> /dev/pts/5
sent [LCP ConfReq id=0x4 <magic 0x19e2cdcf>]
sent [LCP ConfReq id=0x4 <magic 0x19e2cdcf>]
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x8102 -mode VCM_RFC2364 finished (pid 6850), status = 0x0
Modem hangup
Connection terminated.
Terminating on signal 2
ERROR: failed to connect

qualcuno ci capisce qualcosa?!?

@bizzu: sbaglio o la tua guida mi sembra un bel po' più incasinata dell'altra? la tengo per dopo... se nessuno riesce ad aiutarmi con questa. grazie mille comunque