Prova con questi settaggi:
Dram frequency set: 200
command per clock(cpc): enable
cas latency control(tlc): 2,5
ras to cas delay(trcd): 4
min ras active time(tras): 7
row precharge time(trp): 4
row cycle time(trc): 9
row refresh cycle time(trfc): 15
row to row delay(trrd): 2
write recovery time(twr): 2
write to read delay(twtr): 2
read to write delay(trwt): 4
refresh period(tref): 3120
write cas delay(twcl):auto
dram bank interleave: enable
dqs skew control: auto
dqs skew vakue: 0
dram drive strength: auto
dram data drive stranght: level 4
max async latency: 7ns
read preamble time: 5ns
idle cycle limit: 256
dynamic counter: disable
r/w queue bypass: 16X
bypass max: 07X
32 byte granularity: disable
Voltaggio ram da 2.6 a 2.9 volts,e alza pure il vcore a 1.5 max.
Ciao.
