output di sensors:
Can't access /proc file
/proc/sys/dev/sensors/chips or /proc/bus/i2c unreadable;
Make sure you have done 'modprobe i2c-proc'!
output di sensors-detect:
This program will help you to determine which I2C/SMBus modules you need to
load to use lm_sensors most effectively.
You need to have done a `make install', issued a `depmod -a' and made sure
`/etc/conf.modules' (or `/etc/modules.conf') contains the appropriate
module path before you can use some functions of this utility. Read
doc/modules for more information.
Also, you need to be `root', or at least have access to the /dev/i2c[-/]* files
for some things. You can use prog/mkdev/mkdev.sh to create these /dev files
if you do not have them already.
If you have patched your kernel and have some drivers built-in you can
safely answer NO if asked to load some modules. In this case, things may
seem a bit confusing, but they will still work.
BIOS vendor (ACPI): IBM
System vendor (DMI): IBM
BIOS version (DMI): 1RET84WW (2.11 )
Sorry, we won't let you go on. IBM systems are known to have
serious problems with lm_sensors, resulting in hardware failures.
For more information, see README.thinkpad or
http://www2.lm-sensors.nu/~lm78/cvs/...EADME.thinkpad.
La seconda mi dice che sono fregato immagino, vero?