[skyscr3am]

allora credo di aver capito..

Monitor
Model name............... VG248
Manufacturer............. Asus
Plug and Play ID......... ACI24E1
Serial number............ DCLMQS004591
Manufacture date......... 2013, ISO week 49
Filter driver............ None
-------------------------
EDID revision............ 1.3
Input signal type........ Digital
Color bit depth.......... Undefined
Display type............. RGB color
Screen size.............. 530 x 300 mm (24,0 in)
Power management......... Standby, Suspend, Active off/sleep
Extension blocs.......... 1 (CEA-EXT)
-------------------------
DDC/CI................... Supported
MCCS revison............. 2.1
Display technology....... TFT
Controller............... Mstar 0x8556
Firmware revision........ 1.1
Firmware flags........... 0x000045CC
Active power on time..... Not supported
Power consumption........ Not supported
Current frequency........ 137,70kHz, 120,40Hz

Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2,20
Red chromaticity......... Rx 0,650 - Ry 0,329
Green chromaticity....... Gx 0,331 - Gy 0,622
Blue chromaticity........ Bx 0,151 - By 0,053
White point (default).... Wx 0,313 - Wy 0,329
Additional descriptors... None

Timing characteristics
Horizontal scan range.... 30-160kHz
Vertical scan range...... 50-150Hz
Video bandwidth.......... 330MHz
CVT standard............. Not supported
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 1920x1080p at 60Hz (16:9)
Modeline............... "1920x1080" 148,500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync

Standard timings supported
720 x 400p at 70Hz - IBM VGA
640 x 480p at 60Hz - IBM VGA
640 x 480p at 67Hz - Apple Mac II
640 x 480p at 75Hz - VESA
800 x 600p at 56Hz - VESA
800 x 600p at 60Hz - VESA
800 x 600p at 72Hz - VESA
800 x 600p at 75Hz - VESA
832 x 624p at 75Hz - Apple Mac II
1024 x 768p at 60Hz - VESA
1024 x 768p at 70Hz - VESA
1024 x 768p at 75Hz - VESA
1280 x 1024p at 75Hz - VESA
1152 x 864p at 75Hz - VESA STD
1280 x 1024p at 60Hz - VESA STD
1280 x 960p at 60Hz - VESA STD
1280 x 720p at 60Hz - VESA STD
1280 x 800p at 60Hz - VESA STD
1440 x 900p at 60Hz - VESA STD
1680 x 1050p at 60Hz - VESA STD

EIA/CEA-861 Information
Revision number.......... 1
IT underscan............. Not supported
Basic audio.............. Not supported
YCbCr 4:4:4.............. Not supported
YCbCr 4:2:2.............. Not supported
Native formats........... 0
Detailed timing #1....... 1920x1080p at 85Hz (16:9)
Modeline............... "1920x1080" 198,500 1920 1968 2000 2080 1080 1083 1088 1124 +hsync -vsync
Detailed timing #2....... 1920x1080p at 100Hz (16:9)
Modeline............... "1920x1080" 235,500 1920 1968 2000 2080 1080 1083 1088 1133 +hsync -vsync
Detailed timing #3....... 1920x1080p at 120Hz (16:9)
Modeline............... "1920x1080" 285,500 1920 1968 2000 2080 1080 1083 1088 1144 +hsync -vsync
Detailed timing #4....... 1920x1080p at 144Hz (16:9)
Modeline............... "1920x1080" 325,080 1920 1944 1976 2056 1080 1083 1088 1098 +hsync +vsync

CE speaker allocation data
Channel configuration.... 7.0
Front left/right......... Yes
Front LFE................ No
Front center............. Yes
Rear left/right.......... Yes
Rear center.............. No
Front left/right center.. No
Rear left/right center... Yes
Rear LFE................. No

Report information
Date generated........... 06/12/2014
Software revision........ 2.90.0.1000
Data source.............. Real-time 0x0011
Operating system......... 6.1.7601.2.Service Pack 1

Raw data
00,FF,FF,FF,FF,FF,FF,00,04,69,E1,24,01,01,01,01,31,17,01,03,80,35,1E,78,EA,9D,E5,A6,54,54,9F,26,
0D,50,54,B7,EF,00,71,4F,81,80,81,40,81,C0,81,00,95,00,B3,00,01,01,02,3A,80,18,71,38,2D,40,58,2C,
45,00,13,2B,21,00,00,1E,00,00,00,FD,00,32,96,1E,A0,21,00,0A,20,20,20,20,20,20,00,00,00,FC,00,56,
47,32,34,38,0A,20,20,20,20,20,20,20,00,00,00,FF,00,44,43,4C,4D,51,53,30,30,34,35,39,31,0A,01,D5,
02,01,04,00,8A,4D,80,A0,70,38,2C,40,30,20,35,00,13,2B,21,00,00,1A,FE,5B,80,A0,70,38,35,40,30,20,
35,00,13,2B,21,00,00,1A,86,6F,80,A0,70,38,40,40,30,20,35,00,13,2B,21,00,00,1A,FC,7E,80,88,70,38,
12,40,18,20,35,00,13,2B,21,00,00,1E,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,BB

ho letto con un programma l'EDID del mio monitor e da qui spuntano fuori gli standard timings ecco perchè ad esempio la 1152x864 a 75hz che mi viene impostata quando resetto le risoluzioni e quindi va a leggere dall'EDID.
Non mi resta che modificare l'EDID e creare un file .inf modificato con le risoluzioni che mi interessano.

il punto è che mi sto scimunendo con Phoenix e non ne vengo a capo.. come lo genero questo EDID modificato?
Qualche aiuto?