Quote:
Originariamente inviato da Sandan
Non avrai mica il bios settato su efi o uefi?
In ogni caso riprova da capo con calma.
Prendi il disco di installazione di win 7,
quando ti vede l'unità e ti chiede di scegliere dove installare,
schiaccia il tasto opzioni avanzate, in questa schermata ti permette di creare e cancellare eventuali partizioni.
Cancella tutte le partizioni di quel disco, e creane una nuova, facendo la formattazione veloce.
Questo è il modo base di partire.
Facci sapere.
|
ora sono pmagic. gli sto facendo fare un test completo in cerca di errori.
smartctl 5.43 2012-06-30 r3573 [i686-linux-3.5.3-pmagic] (local build)
Copyright (C) 2002-12 by Bruce Allen,
http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Crucial/Micron RealSSD C300/C400/m4
Device Model: M4-CT128M4SSD2
Serial Number: 0000000011520900A657
LU WWN Device Id: 5 00a075 10900a657
Firmware Version: 000F
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Mon Oct 8 19:03:16 2012 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 595) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 9) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 001 Old_age Always - 218
12 Power_Cycle_Count 0x0032 100 100 001 Old_age Always - 162
170 Grown_Failing_Block_Ct 0x0033 100 100 010 Pre-fail Always - 0
171 Program_Fail_Count 0x0032 100 100 001 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 001 Old_age Always - 128
173 Wear_Levelling_Count 0x0033 100 100 010 Pre-fail Always - 2
174 Unexpect_Power_Loss_Ct 0x0032 100 100 001 Old_age Always - 37
181 Non4k_Aligned_Access 0x0022 100 100 001 Old_age Always - 20 8 12
183 SATA_Iface_Downshift 0x0032 100 100 001 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 050 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 001 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 001 Old_age Always - 0
189 Factory_Bad_Block_Ct 0x000e 100 100 001 Old_age Always - 80
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 0
195 Hardware_ECC_Recovered 0x003a 100 100 001 Old_age Always - 87
196 Reallocated_Event_Count 0x0032 100 100 001 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 001 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 001 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 001 Old_age Always - 27207
202 Perc_Rated_Life_Used 0x0018 100 100 001 Old_age Offline - 0
206 Write_Error_Rate 0x000e 100 100 001 Old_age Always - 0
SMART Error Log Version: 1
Warning: ATA error count 0 inconsistent with error log pointer 2
ATA Error Count: 0
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 0 occurred at disk power-on lifetime: 218 hours (9 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 a8 40 ed 73 40 at LBA = 0x0073ed40 = 7597376
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 a8 28 ed 73 40 00 9d+02:03:00.000 WRITE FPDMA QUEUED
61 03 08 20 ed 73 40 00 9d+02:03:00.000 WRITE FPDMA QUEUED
ef 10 02 00 00 00 a0 00 9d+02:03:00.000 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 9d+02:03:00.000 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 9d+02:03:00.000 IDENTIFY DEVICE
Error -1 occurred at disk power-on lifetime: 218 hours (9 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 08 18 ed 73 40 at LBA = 0x0073ed18 = 7597336
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 08 18 ed 73 40 00 9d+02:03:00.000 WRITE FPDMA QUEUED
61 00 08 10 ed 73 40 00 9d+02:03:00.000 WRITE FPDMA QUEUED
61 00 08 08 ed 73 40 00 9d+02:03:00.000 WRITE FPDMA QUEUED
61 00 08 00 ed 73 40 00 9d+02:03:00.000 WRITE FPDMA QUEUED
61 00 08 f8 ec 73 40 00 9d+02:03:00.000 WRITE FPDMA QUEUED
Error -2 occurred at disk power-on lifetime: 218 hours (9 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 08 50 e8 73 40 at LBA = 0x0073e850 = 7596112
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 08 50 e8 73 40 00 9d+02:03:00.000 WRITE FPDMA QUEUED
61 00 08 48 e8 73 40 00 9d+02:03:00.000 WRITE FPDMA QUEUED
61 00 08 40 e8 73 40 00 9d+02:03:00.000 WRITE FPDMA QUEUED
61 00 08 38 e8 73 40 00 9d+02:03:00.000 WRITE FPDMA QUEUED
61 00 08 30 e8 73 40 00 9d+02:03:00.000 WRITE FPDMA QUEUED
Error -3 occurred at disk power-on lifetime: 217 hours (9 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 00 20 08 44 40 at LBA = 0x00440820 = 4458528
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 01 00 10 0c 44 40 00 9d+01:33:00.000 WRITE FPDMA QUEUED
61 01 00 10 08 44 40 00 9d+01:33:00.000 WRITE FPDMA QUEUED
ef 10 02 00 00 00 a0 00 9d+01:33:00.000 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 9d+01:33:00.000 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 9d+01:33:00.000 IDENTIFY DEVICE
Error -4 occurred at disk power-on lifetime: 217 hours (9 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 00 20 10 3c 40 at LBA = 0x003c1020 = 3936288
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 01 00 10 10 3c 40 00 9d+01:33:00.000 WRITE FPDMA QUEUED
ef 10 02 00 00 00 a0 00 9d+01:33:00.000 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 9d+01:33:00.000 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 9d+01:33:00.000 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 9d+01:33:00.000 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 218 -
# 2 Vendor (0xff) Completed without error 00% 217 -
# 3 Short offline Completed without error 00% 216 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
nessun errore trovato.
Bios uefi? Difficile su una asus p5b
