Quote:
Originariamente inviato da Flavio85
Ciao ragazzi ho questa fantastica scehda madre con un intel e6400 e una gtx260 nivida.
Quali parametri mi conisgliate per overclokkare il tutto?
ho bisono di ventole sul chipset ect?
grazie mille
|
prova così
Advanced - Jumper Free Configuration - AI Tuning - Manual -
CPU Frequency 400
DRAM Frequency 800
PCI Expresso Frequency 101
PCI Synchronization Mode 33.33
Spread Spectrum Disable
Memory Voltage 2.1
CPU VCore Voltage 1.40
FSB Termination Voltage 1.300
NB Vcore 1,4
SB Vcore Voltage (SATA,PCI-E) 1.50
ICH Chipset Voltage 1.057
Advanced - CPU Configuration -
Modify Ratio Support Disable
C1E Support Disable
Max CPU Value Limit Disable
Vanderpool Tecnology Disable
CPU TM Function Enable
Execute disable Bit Disable
PECI Enabled
Intel Speedstep tech. Disable
Advanced - Chipset - Northbridge Configuration -
Memory Remap Features Disable
Configure Timing by SPD Disable
DRAM CAS# latency 4
DRAM RAS# Latency 4
DRAM RAS# Parchage 4
DRAM RAS# Activate to Parcherge 12
DRAM Write recovery Time 5
DRAM TRFC 35
DRAM TRRD 10
Rank Write to Read Delay 10
Read to Parcharge Delay 10
Write to Parchage Delay 10
Satic Read Control Auto o Disable