|
Mainboard FB83
Note: Mainboard only available in conjunction with XPC SB83G5!
* Chipset:
Northbridge: Intel 915G
Southbridge: ICH6R
* Processor-Support
System Clock: 800/533 MHz FSB
CPU-Socket: LGA775
CPU-Support: Intel Pentium 4 processors for socket 775 with 800 or 533MHz FSB
* Expansion Slots:
1 x PCI-Express (PCI-E, 16X)
1 x 32 Bit PCI (v2.2)
* IDE-Controller
Onboard IDE Controller ATA100
supports up to IDE-drives
* SATA RAID-Controller
Onboard Serial ATA150 RAID Controller
supports RAID-Level 0 and 1
for up to two Serial-ATA-drives
* Multimedia:
6-Channel sound
Connectors on the backpanel: 6-channel audio-out (analogous: rear, front, bass/center,
optical SPDIF-in and out, coaxial SPDIF-out
Connectors on the frontpanel: microphone, line-out (headphones)
More audio-inputs on the mainboard for 2x CD-ROM and AUX.
* Ethernet:
Ethernet: 10/100/1.000 MBit
* Backpanel-Connectors:
1 x PS/2-Mouse
1 x PS/2-Keyboard
1 x Serial
1 x VGA
1 x RJ45 (GigaBit LAN)
2 x USB 2.0 (total 8)
1 x Firewire (6 pol.)
Connectors on the backpanel: 6-channel audio-out, line-in,
optical SPDIF-in and out, coaxial SPDIF-out
optional parallel port
optional Wireless-LAN-Adaptor/Antenna
* Onboard-Connectors:
1 x Floppy drive
1 x IDE (ATA-100)
6 x USB 2.0 (2 for the frontpanel, total 8x USB)
2 x CDROM audio-in
1 x AUX
Fan-connectors
* Memory:
2 x 184-Pin for Dual Channel PC2700 (DDR333) or PC3200 (DDR400)
unbuffered DDR SDRAM memory with 166 or 200MHz clock frequency up to a total capacity of 2GB
* Hardware-Monitoring
CPU-temperature, system voltages and fan revolution
* Power Management
ACPI Version 1.0 (Advanced Configuration and Power Interface)
supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off)
On/Off-button with two functions: suspend-mode / soft-off
* BIOS
Award V6.0PG PnP Green BIOS
stored in 4MBit Flash-memory chip
* ATX power supply connector
Standard 20-Pin-ATX-power supply connector + 4-Pins
* Form Factor
Flex-ATX: 254mm x 185mm
* Conformity
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits
|