Dove trovo una guida con tutte le spiegazioni delle impostazioni del bios?
E 2 giorni che ho iniziato a provare l overclock su queste "nuove" piattaforme .....nuove per me... sono andato un po' a naso e al volo e ho fatto questa cosa ... ditemi voi come sono ...
i voltaggi ho impostato tutto pratimenti sul primo valore passato il verde di tutti i voltaggi.tranne vcore cpu...per prova...anche xkè vorrei trovare appunto una guida dove li spiega tutti,.
Extreme Tweaker
Ai Overclock Tuner : Manual
OC From CPU Level Up : Crazy
CPU Ratio Control : Manual
- Ratio CMOS Setting : 8
FSB Frequency : 500
FSB Strap to North Bridge :400
PCI-E Frequency: 101
DRAM Frequency: DDR2-1000
DRAM Command Rate : 2
DRAM Timing Control: AUTO
CAS# Latency :
RAS# to CAS# Delay :
RAS# Precharge :
RAS# ActivateTime :
RAS# to RAS# Delay :
Row Refresh Cycle Time :
Write Recovery Time :
Read to Precharge Time :
Read to Write Delay (S/D) :
Write to Read Delay (S) :
Write to Read Delay (D) :
Read to Read Delay (S) :
Read to Read Delay (D) :
Write to Write Delay (S) :
Write to Write Delay (D) :
DRAM Static Read Control:
Ai Clock Twister :
Transaction Booster :
CPU Voltage : 1.340
CPU PLL Voltage :
North Bridge Voltage :
DRAM Voltage : 2.380
FSB Termination Voltage :
South Bridge Voltage :
Loadline Calibration : ENABLE
CPU GTL Reference :
North Bridge GTL Reference :
DDR2 Channel A REF Voltage :
DDR2 Channel B REF Voltage :
DDR2 Controller REF Voltage :
SB 1.5V Voltage :
NB LED Selection : NB Volt
SB LED Selection : SB Volt
CPU LED Selection : CPU VOlt
Voltiminder LED :
CPU Spread Spectrum : Disabled
PCIE Spread Spectrum : Disabled
Advanced CPU Configuration
CPU Ratio Control : Manual
- Ratio CMOS Setting :
C1E Suppport : Disabled
CPU TM Function : Disabled
Vanderpool Technology : Disabled
Execute Disable Bit : Disabled
Max CPUID Value Limit : Disabled
USB Configuration
USB Functions: Enabled
Legacy USB Support : Disabled