v.3.x
PROCESSORS
AMD® Athlon XP / Athlon / Duron CPU
266 / 200MHz FSB
Socket A
v.1.x
PROCESSORS
462 pin Socket A supports the AMD® K7 processors
Athlon XP / Athlon / Duron processors
la versione che ho letto io e' quella del libretto delle istruzioni, perchè sulls scheda non ho trovato nulla,dove c'è scritto che supporta tutti i processori AMD® Athlon XP / Athlon / Duron CPU 266 / 200MHz FSB Socket A
Mainboard User’s Manual
2
Key Features
The key features of this mainboard include:
Socket-A Processor Support
Supports AMD Athlon/Duron processors
Supports 200/266 MHz Front-Side Bus
Processors are automatically configured using firmware and a
synchronous Host/DRAM Clock Scheme.
Memory Support
Two 168-pin DIMM slots for SDRAM memory modules
Two 184-pin DIMM slots for DDR memory modules
Support SDRAM up to 133 MHz /DDR up to 266 MHz
memory bus
Maximum installed memory is 1GB
Notice: You can NOT use SDRAM and DDR simultaneously.
Expansion Slots
¨ One AMR slot for a special audio/modem riser card
¨ One AGP4X slot for AGP 2.0-compliant interface
¨ Five 32-bit PCI slots for PCI 2.2-compliant bus interface
Onboard IDE channels
¨ Primary and Secondary PCI IDE channels
¨ Support for PIO (programmable input/output) modes
¨ Support for Multiword DMA modes
¨ Support for Bus Mastering and Ultra DMA 33/66/100
modes
Power Supply and Power Management
¨ ATX power supply connector
¨ Meets ACPI 1.0b and APM 1.2 requirements, keyboard
power on/off
¨ Supports RTC Alarm, Wake On Modem, AC97 Wake-Up
and USB Wake-Up
il 1900+ che ho lavora a 266 fsb e quindi non vedo che differenza hanno per il processore.
Comunque se non è quella che cerchi non fa nulla, ciao e alla prossima
manuale