ok, sono riuscito a installare tutto, ma i valori sono completamente sballati!!!
hal-9000:~# sensors
eeprom-i2c-0-50
Adapter: SMBus SiS645 adapter at 0x0c00
Algorithm: Non-I2C SMBus adapter
Memory type: DDR SDRAM DIMM SPD
Memory size (MB): 256
eeprom-i2c-0-51
Adapter: SMBus SiS645 adapter at 0x0c00
Algorithm: Non-I2C SMBus adapter
Memory type: DDR SDRAM DIMM SPD
Memory size (MB): 256
it87-isa-0290
Adapter: ISA adapter
Algorithm: ISA algorithm
VCore 1: +1.74 V (min = +1.53 V, max = +1.87 V)
VCore 2: +2.48 V (min = +2.25 V, max = +2.75 V)
+3.3V: +6.48 V (min = +2.96 V, max = +3.60 V) ALARM
+5V: +4.84 V (min = +4.50 V, max = +5.48 V)
+12V: +12.16 V (min = +11.36 V, max = +13.80 V)
-12V: -1.13 V (min = -15.86 V, max = -13.40 V) ALARM
-5V: -8.96 V (min = -10.13 V, max = -9.44 V) ALARM
Stdby: +5.04 V (min = +4.50 V, max = +5.48 V)
VBat: +3.42 V
fan1: 0 RPM (min = 3000 RPM, div = 2) ALARM
fan2: 21093 RPM (min = 3000 RPM, div = 2)
fan3: 0 RPM (min = 3000 RPM, div = 2) ALARM
Temp1/MB: +16°C (min = +20°C, max = +60°C)
Temp2/CPU: +117°C (min = +20°C, max = +60°C)
Temp3: +41°C (min = +20°C, max = +60°C)
hal-9000:~#
Fortunatamente la mia CPU non è a 117°.....come posso risolvere questo problema?
Comunque grazie a tutti per l'aiuto!
