|
Senior Member
Iscritto dal: Feb 2004
Messaggi: 1454
|
non ho neanche provato a blacklistarli, se non ci sono a che servirebbe? o sbaglio?
la verifica dell'esistenza della nuova interfaccia l'ho fatta senza riavviare, quindi credo non fosse necessario modificare /etc/modules... comunque anche modificandolo e riavviando non è cambiato niente.
output di lsmod | grep rt73:
Codice:
rt73 214016 0
usbcore 134280 4 rt73,ehci_hcd,ohci_hcp
output di dmesg:
Codice:
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001fff0000 size: 0000000000003000 end: 000000001fff3000 type: 4
[ 0.000000] copy_e820_map() start: 000000001fff3000 size: 000000000000d000 end: 0000000020000000 type: 3
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x000f7960
[ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
[ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
[ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff7d00
[ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Detected 1603.706 MHz processor.
[ 20.247735] Built 1 zonelists. Total pages: 130033
[ 20.247739] Kernel command line: root=UUID=0f95d259-8c47-421d-b0be-04446e23bb71 ro quiet splash
[ 20.247929] mapped APIC to ffffd000 (fee00000)
[ 20.247932] mapped IOAPIC to ffffc000 (fec00000)
[ 20.247935] Enabling fast FPU save and restore... done.
[ 20.247938] Enabling unmasked SIMD FPU exception support... done.
[ 20.247947] Initializing CPU#0
[ 20.247999] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 20.249259] Console: colour VGA+ 80x25
[ 20.249510] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 20.249757] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 20.261537] Memory: 508480k/524224k available (1992k kernel code, 15180k reserved, 893k data, 328k init, 0k highmem)
[ 20.261549] virtual kernel memory layout:
[ 20.261551] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 20.261552] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 20.261554] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 20.261555] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 20.261557] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 20.261558] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 20.261560] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 20.261564] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 20.339930] Calibrating delay using timer specific routine.. 3209.95 BogoMIPS (lpj=6419904)
[ 20.339973] Security Framework v1.0.0 initialized
[ 20.339979] SELinux: Disabled at boot.
[ 20.339996] Mount-cache hash table entries: 512
[ 20.340133] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[ 20.340143] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 20.340146] CPU: L2 Cache: 512K (64 bytes/line)
[ 20.340149] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[ 20.340160] Compat vDSO mapped to ffffe000.
[ 20.340165] Remapping vsyscall page to ffffe000
[ 20.340174] Checking 'hlt' instruction... OK.
[ 20.356023] SMP alternatives: switching to UP code
[ 20.356220] Freeing SMP alternatives: 11k freed
[ 20.356429] Early unpacking initramfs... done
[ 20.724978] ACPI: Core revision 20060707
[ 20.731956] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 20.735416] CPU0: AMD Athlon(tm) stepping 00
[ 20.735438] Total of 1 processors activated (3209.95 BogoMIPS).
[ 20.735640] ENABLING IO-APIC IRQs
[ 20.735826] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 20.879542] Brought up 1 CPUs
[ 20.879788] Booting paravirtualized kernel on bare hardware
[ 20.879857] Time: 8:59:24 Date: 08/20/107
[ 20.879888] NET: Registered protocol family 16
[ 20.879980] EISA bus registered
[ 20.879985] ACPI: bus type pci registered
[ 20.914473] PCI: PCI BIOS revision 2.10 entry at 0xfb440, last bus=2
[ 20.914476] PCI: Using configuration type 1
[ 20.914478] Setting up standard PCI resources
[ 20.929168] ACPI: Interpreter enabled
[ 20.929172] ACPI: Using IOAPIC for interrupt routing
[ 20.929874] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 20.929879] PCI: Probing PCI hardware (bus 00)
[ 20.930180] PCI: nForce2 C1 Halt Disconnect fixup
[ 20.930939] Boot video device is 0000:02:00.0
[ 20.931027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 21.011191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 21.011861] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 21.013127] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 21.013531] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.013925] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.014321] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 21.014714] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.015111] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 21.015516] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 21.015909] ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 21.016301] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 21.016704] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 21.017098] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.017492] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.017887] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 21.018293] ACPI: PCI Interrupt Link [LFIR] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 21.018691] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.019087] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.019456] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[ 21.019804] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[ 21.020151] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[ 21.020496] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[ 21.020841] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 21.021285] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[ 21.021731] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[ 21.022187] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[ 21.022629] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 21.023089] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[ 21.023552] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 21.023898] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[ 21.024335] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[ 21.024777] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 21.025228] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 21.025665] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 21.029886] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 21.029902] pnp: PnP ACPI init
[ 21.037351] pnp: PnP ACPI: found 16 devices
[ 21.037355] PnPBIOS: Disabled by ACPI PNP
[ 21.037404] PCI: Using ACPI for IRQ routing
[ 21.037410] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 21.077642] NET: Registered protocol family 8
[ 21.077644] NET: Registered protocol family 20
[ 21.078356] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[ 21.078360] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[ 21.078366] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[ 21.078370] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[ 21.078373] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[ 21.078376] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[ 21.078382] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[ 21.078385] pnp: 00:01: ioport range 0x5100-0x513f has been reserved
[ 21.078689] PCI: Bridge: 0000:00:08.0
[ 21.078693] IO window: a000-bfff
[ 21.078699] MEM window: ea000000-ebffffff
[ 21.078703] PREFETCH window: 30000000-300fffff
[ 21.078709] PCI: Bridge: 0000:00:1e.0
[ 21.078711] IO window: c000-cfff
[ 21.078716] MEM window: e8000000-e9ffffff
[ 21.078720] PREFETCH window: d8000000-e7ffffff
[ 21.078730] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 21.078760] NET: Registered protocol family 2
[ 21.115386] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 21.115471] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 21.115628] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 21.115722] TCP: Hash tables configured (established 16384 bind 8192)
[ 21.115725] TCP reno registered
[ 21.127422] checking if image is initramfs... it is
[ 21.834032] Freeing initrd memory: 6992k freed
[ 21.834498] audit: initializing netlink socket (disabled)
[ 21.834511] audit(1190278764.668:1): initialized
[ 21.834622] VFS: Disk quotas dquot_6.5.1
[ 21.834640] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 21.834683] io scheduler noop registered
[ 21.834686] io scheduler anticipatory registered
[ 21.834689] io scheduler deadline registered
[ 21.834698] io scheduler cfq registered (default)
[ 21.874940] isapnp: Scanning for PnP cards...
[ 22.229117] isapnp: No Plug & Play device found
[ 22.257299] Real Time Clock Driver v1.12ac
[ 22.257355] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 22.257487] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.258125] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.258414] mice: PS/2 mouse device common for all mice
[ 22.258997] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 22.259224] input: Macintosh mouse button emulation as /class/input/input0
[ 22.259261] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 22.259265] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 22.259483] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 22.262364] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 22.262370] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 22.262512] EISA: Probing bus 0 at eisa.0
[ 22.262536] Cannot allocate resource for EISA slot 4
[ 22.262539] Cannot allocate resource for EISA slot 5
[ 22.262556] EISA: Detected 0 cards.
[ 22.292622] TCP cubic registered
[ 22.292629] NET: Registered protocol family 1
[ 22.292649] Using IPI No-Shortcut mode
[ 22.292708] ACPI: (supports S0 S1 S4 S5)
[ 22.292762] Magic number: 7:809:978
[ 22.292777] hash matches device ttyc5
[ 22.293205] Freeing unused kernel memory: 328k freed
[ 22.294363] Time: tsc clocksource has been installed.
[ 22.307260] input: AT Translated Set 2 keyboard as /class/input/input1
[ 23.548028] Capability LSM initialized
[ 23.585441] ACPI: Fan [FAN] (on)
[ 23.591914] ACPI: Thermal Zone [THRM] (29 C)
[ 24.123359] usbcore: registered new interface driver usbfs
[ 24.123387] usbcore: registered new interface driver hub
[ 24.123413] usbcore: registered new device driver usb
[ 24.124175] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 24.124667] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 24.124676] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16
[ 24.124689] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 24.124694] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 24.124833] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 24.124853] ohci_hcd 0000:00:02.0: irq 16, io mem 0xec080000
[ 24.164957] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[ 24.193758] SCSI subsystem initialized
[ 24.199503] libata version 2.20 loaded.
[ 24.214723] ieee1394: Initialized config rom entry `ip1394'
[ 24.235297] usb usb1: configuration #1 chosen from 1 choice
[ 24.235327] hub 1-0:1.0: USB hub found
[ 24.235339] hub 1-0:1.0: 3 ports detected
[ 24.341309] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[ 24.341319] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17
[ 24.341335] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 24.341339] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 24.341364] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 24.341385] ohci_hcd 0000:00:02.1: irq 17, io mem 0xec083000
[ 24.391388] Floppy drive(s): fd0 is 1.44M
[ 24.402750] usb usb2: configuration #1 chosen from 1 choice
[ 24.402782] hub 2-0:1.0: USB hub found
[ 24.402795] hub 2-0:1.0: 3 ports detected
[ 24.450112] FDC 0 is a post-1991 82077
[ 24.509283] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 24.509294] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 18
[ 24.509306] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 24.509310] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 24.509338] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 24.509374] ehci_hcd 0000:00:02.2: debug port 1
[ 24.509380] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 24.509391] ehci_hcd 0000:00:02.2: irq 18, io mem 0xec086000
[ 24.509400] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 24.509475] usb usb3: configuration #1 chosen from 1 choice
[ 24.509504] hub 3-0:1.0: USB hub found
[ 24.509513] hub 3-0:1.0: 6 ports detected
[ 24.617159] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 24.617166] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16
[ 24.617173] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 25.140416] eth0: forcedeth.c: subsystem: 010de:0c11 bound to 0000:00:04.0
[ 25.145592] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[ 25.145615] NFORCE2: chipset revision 162
[ 25.145618] NFORCE2: not 100% native mode: will probe irqs later
[ 25.145627] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[ 25.145637] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[ 25.145649] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[ 25.145658] Probing IDE interface ide0...
[ 25.659746] hdb: Maxtor 6Y080L0, ATA DISK drive
[ 25.719878] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 25.728257] Probing IDE interface ide1...
[ 26.467095] hdc: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
[ 26.807984] ide1 at 0x170-0x177,0x376 on irq 15
[ 26.815049] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
[ 26.815055] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 21 (level, high) -> IRQ 17
[ 26.815062] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 26.867706] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[ec084000-ec0847ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 26.884174] hdb: max request size: 128KiB
[ 26.884232] sata_sil 0000:01:0b.0: version 2.2
[ 26.884514] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 26.884523] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19
[ 26.884542] sata_sil 0000:01:0b.0: Applying R_ERR on DMA activate FIS errata fix
[ 26.884608] ata1: SATA max UDMA/100 cmd 0xe0934080 ctl 0xe093408a bmdma 0xe0934000 irq 19
[ 26.884641] ata2: SATA max UDMA/100 cmd 0xe09340c0 ctl 0xe09340ca bmdma 0xe0934008 irq 19
[ 26.884673] ata3: SATA max UDMA/100 cmd 0xe0934280 ctl 0xe093428a bmdma 0xe0934200 irq 19
[ 26.884704] ata4: SATA max UDMA/100 cmd 0xe09342c0 ctl 0xe09342ca bmdma 0xe0934208 irq 19
[ 26.884718] scsi0 : sata_sil
[ 26.894453] hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
[ 26.895699] hdb: cache flushes supported
[ 26.895745] hdb: hdb1 hdb2 hdb3
[ 26.931985] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 26.931994] Uniform CD-ROM driver Revision: 3.20
[ 27.159884] Attempting manual resume
[ 27.159889] swsusp: Resume From Partition 3:66
[ 27.159891] PM: Checking swsusp image.
[ 27.160195] PM: Resume from disk failed.
[ 27.187786] kjournald starting. Commit interval 5 seconds
[ 27.187798] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.194398] ata1: SATA link down (SStatus 0 SControl 310)
[ 27.194423] scsi1 : sata_sil
[ 27.510139] ata2: SATA link down (SStatus 0 SControl 310)
[ 27.510171] scsi2 : sata_sil
[ 27.825882] ata3: SATA link down (SStatus 0 SControl 310)
[ 27.825904] scsi3 : sata_sil
[ 27.987912] ohci1394: fw-host0: SelfID received outside of bus reset sequence
[ 28.245542] ata4: SATA link down (SStatus 0 SControl 310)
[ 28.246153] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 28.246409] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 28.246417] ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 20
[ 28.246559] eth1: RTL8169s/8110s at 0xe08c2000, 00:01:29:26:1f:6b, IRQ 20
[ 28.261657] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0001292000003a4b]
[ 36.442986] r8169: eth1: link down
[ 36.907464] NET: Registered protocol family 10
[ 36.907556] lo: Disabled Privacy Extensions
[ 36.907903] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 38.404891] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 38.404935] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100
[ 38.459156] Linux agpgart interface v0.102 (c) Dave Jones
[ 38.490577] agpgart: Detected NVIDIA nForce2 chipset
[ 38.497145] agpgart: AGP aperture is 128M @ 0xd0000000
[ 38.769327] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 38.779936] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 39.273928] input: PC Speaker as /class/input/input2
[ 39.462363] parport: PnPBIOS parport detected.
[ 39.462422] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 39.490467] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3
[ 39.811197] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
[ 39.811203] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 (level, high) -> IRQ 18
[ 39.811230] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 40.135897] intel8x0_measure_ac97_clock: measured 56820 usecs
[ 40.135901] intel8x0: clocking to 48000
[ 40.263068] fuse init (API version 7.8)
[ 40.286509] lp0: using parport0 (interrupt-driven).
[ 40.368118] rtusb init ====>
[ 40.369416] usbcore: registered new interface driver rt73
[ 40.401070] Adding 1951888k swap on /dev/disk/by-uuid/6db01978-5f81-4dc3-8afb-5a4d7529fb4d. Priority:-1 extents:1 across:1951888k
[ 40.542629] EXT3 FS on hdb1, internal journal
[ 40.801621] kjournald starting. Commit interval 5 seconds
[ 40.801901] EXT3 FS on hdb3, internal journal
[ 40.801906] EXT3-fs: mounted filesystem with ordered data mode.
[ 42.175799] NET: Registered protocol family 17
[ 45.049397] input: Power Button (FF) as /class/input/input4
[ 45.053883] ACPI: Power Button (FF) [PWRF]
[ 45.097827] input: Power Button (CM) as /class/input/input5
[ 45.102304] ACPI: Power Button (CM) [PWRB]
[ 45.189983] No dock devices found.
[ 45.260560] ibm_acpi: ec object not found
[ 45.295979] Using specific hotkey driver
[ 45.342882] pcc_acpi: loading...
[ 46.986355] eth0: no IPv6 routers present
[ 51.000251] [drm] Initialized drm 1.1.0 20060810
[ 51.011678] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19
[ 51.014539] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 51.658898] ppdev: user-space parallel port driver
[ 52.287762] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 52.287768] apm: overridden by ACPI.
[ 52.472690] Bluetooth: Core ver 2.11
[ 52.472749] NET: Registered protocol family 31
[ 52.472751] Bluetooth: HCI device and connection manager initialized
[ 52.472756] Bluetooth: HCI socket layer initialized
[ 52.510890] Bluetooth: L2CAP ver 2.8
[ 52.510894] Bluetooth: L2CAP socket layer initialized
[ 52.678133] Bluetooth: RFCOMM socket layer initialized
[ 52.678148] Bluetooth: RFCOMM TTY layer initialized
[ 52.678150] Bluetooth: RFCOMM ver 1.8
[ 52.993018] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 52.993212] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[ 52.993270] agpgart: Putting AGP V3 device at 0000:02:00.0 into 4x mode
[ 53.306034] [drm] Setting GART location based on new memory map
[ 53.306046] [drm] Loading R300 Microcode
[ 53.306095] [drm] writeback test succeeded in 1 usecs
[ 257.728122] usb 3-4: new high speed USB device using ehci_hcd and address 2
[ 257.868381] usb 3-4: configuration #1 chosen from 1 choice
non mi sembrano errori, questi alla fine... comunque mi sono accorto che in system->preferenze->hardware information la scheda è chiamata unknown (0x0163) e non col suo nome... è normale?
Ultima modifica di Furla : 20-09-2007 alle 09:24.
|