[Save85]

Ciao,
ho un pc con mobo biostar k8nham e ho montato una cpu AMD Sempron 2800+. Nella schermata di avvio il processore non viene riconosciuto come Sempron, ma solo come appartenente alla famiglia AMD. il test con CPU-z invece la riconosce come Sempron. Inoltre ho montato una DDR PC3200 da 512MB ma me la riconosce come da 256! Che potrei fare?

Number of processors 1
Number of cores 1 per processor
Number of threads 1 (max 1) per processor
Name AMD Sempron 2800+
Code Name Palermo
Specification AMD Hammer Family processor - Model Unknown
Package Socket 754
Family/Model/Stepping F.C.0
Extended Family/Model F.1C
Brand ID 34
Core Stepping DH8-D0
Technology 90 nm
Core Speed 1607.9 MHz
Multiplier x Bus speed 8.0 x 201.0 MHz
HT Link speed 803.9 MHz
Instruction sets MMX (+), 3DNow! (+), SSE, SSE2, x86-64
L1 Data cache 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 256 KBytes, 16-way set associative, 64-byte line size

Chipset & Memory

Northbridge NVIDIA nForce3 250 rev. A1
Southbridge NVIDIA nForce3 MCP rev. A2
Memory Type DDR
Memory Size 512 MBytes
Memory Frequency 201.0 MHz (CPU/8)
CAS# Latency (tCL) 3.0 clocks
RAS# to CAS# (tRDC) 4 clocks
RAS# Precharge (tRP) 4 clocks
Cycle Time (tRAS) 8 clocks
Bank Cycle Time (tRC) 12 clocks
DRAM Idle Timer 16 clocks
Command Rate 2T


Memory SPD

Module 1 DDR, PC3200 (200 MHz), 512 MBytes, unknown brand