View Single Post
Old 17-09-2006, 23:23   #3993
scrok
Junior Member
 
Iscritto dal: Sep 2006
Messaggi: 3
Help

Scusatemi forse non sono stato molto chiaro....
la pagina incriminata è la 44 del manuale di istruzione

2.6 Jumpers
1. Clear RTC RAM (CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords.To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Remove the onboard battery.
3. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3 for about 5~10 seconds, then move the cap back to pins 1-2.
4. Re-install the battery.
5. Plug the power cord and turn ON the computer.
6. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data.

non so se tenete presente....
Cmq il fatto è che ora il bios non parte, cioè accendi il PC, arrivaa corrente, ma il monitor rimane spento, il bios non carica niente, e il PC è inutilizzabile!!!
Spero che qualcuno mi possa dare una mano!!!
P.S. volevo allegare la paggina del manuale in Pdf per una maggiore chiarezza ma non è stato possibile visto che il file è di 144KB e il massimo è 24,4KB che cazz...
scrok è offline   Rispondi citando il messaggio o parte di esso