....x alpha timings si intendono tutte le impostazioni spesso non *sponsorizzate* delle ram... insomma i timings *secondari*
esempio pratico
Timing principali della memoria:
CAS Latency (CL)
RAS To CAS Delay (tRCD)
RAS Precharge (tRP)
RAS Active Time (tRAS)
Command Rate (CR)
e questi gli alpha timings
Row Cycle Time (tRC)
Row Refresh Cycle Time (tRFC)
RAS To RAS Delay (tRRD)
Write Recovery Time (tWR)
Read To Write Delay (tRTW)
Write To Read Delay (tWTR)
Write CAS Latency (tWCL)
Refresh Period (tREF)
Max Async Latency
Read Preamble Time
Idle Cycle Limit
Dynamic Idle Cycle Counter
Read/Write Queue Bypass
Bypass Max
x spyfly
hai provato le coppie prima sugli slot blu e poi su quelli neri per vendere come vanno?
Vedi se salgono allo stesso su entrambi i canali!
Per i 2.9v ti consiglio di monitarli per bene...e cmq di tenere questo voltaggio solo per i test.... prova 2.8v->2.85v come voltaggio massimo!
x dodo88
prova questi alpha tanto per incominciare....
Row Cycle Time (tRC) 7T
Row Refresh Cycle Time (tRFC) 13T
RAS To RAS Delay (tRRD) 2T
Write Recovery Time (tWR) 2T
Read To Write Delay (tRTW) 3T
Write To Read Delay (tWTR) 2T
Write CAS Latency (tWCL) 1T
Refresh Period (tREF) 200 MHz 7.8 us
DQS Skew Control Disattivato
DRAM Drive Strength Weak
DRAM Data Drive Strength 4 (No Reduction)
Max Async Latency 8 ns -> 9.0
Read Preamble Time 6.0 ns
Idle Cycle Limit 256
Dynamic Idle Cycle Counter Attivo
Read/Write Queue Bypass 16
Bypass Max 7
32-byte Granularity Disattivato