NB queste sono ottime ram, ma sono a grosso rischio rottura, molti utenti le hanno spedite indietro in RMA dopo qualche mese, indipendentemente dal raffreddamento o dalla tensione di alimentazione.
LE BALLISTIX SEMBREREBBERO ANDARE MEGLIO SU MOBO DFI, INVECE HANNO QUALCHE PROBLEMA CON LE MOBO ASUS PREMIUM.
Sulla ASUS AN832, bisogna disabilitare nel bios la voce " Legacy USB support " situata nel menu " Advanced " , ultimo in fondo , " USB settings ", altrimenti si rischiano strani allarmi o crash anche a frequenze standard.
Per le ASUS le ram migliori sembrerebbero le Corsair 3500LL
Module Details: BL2KIT12864Z503
Module Details:
* Part Number: BL2KIT12864Z503
* Module Size: 2GB kit (1GBx2)
* Package: Ballistix 184-pin DIMM
* Feature: DDR PC4000
* Configuration: 128Meg x 64
* DIMM Type:
* Error Checking: NON-ECC
* Speed: DDR500
* Voltage: 2.8V
* Memory Timings: 3-4-4-8
* Specs: DDR PC4000 • 3-4-4-8 • Unbuffered • NON-ECC • DDR500 • 2.8V • 128Meg x 64
http://www.crucial.com/store/partspe...L2KIT12864Z503
Module Details: BL2KIT12864L503 ( Si distinguono solo per i led in piu' )
Module Details:
* Part Number: BL2KIT12864L503
* Module Size: 2GB kit (1GBx2)
* Package: Ballistix Tracer 184-pin DIMM (with LEDs)
* Feature: DDR PC4000
* Configuration: 128Meg x 64
* DIMM Type:
* Error Checking: NON-ECC
* Speed: DDR500
* Voltage: 2.8V
* Memory Timings: 3-4-4-8
* Specs: DDR PC4000 • 3-4-4-8 • Unbuffered • NON-ECC • DDR500 • 2.8V • 128Meg x 64
http://www.crucial.com/store/partspe...L2KIT12864L503
------------------------------------------------------------------------
MB DFI LANPARTY ULTRA-D
Io ho montato le Z503 sulla mia mobo DFI lanparty ultra-D, al max ho raggiunto 250 cas2.5 e 280 cas3 a 2.7/2.75Vcon bios 704-2 BTA.
Le ram scaldano molto se si sale parecchio, si consiglia una ventola che butti aria direttamente sulle ram ( fino ai 260 a 2.7v si puo' anche fare a meno ).
Circolano notizie di diverse ram che si sono guastate in poco tempo, ma visto il tipo di ram dedicate agli overclockers, non si sa a quale voltaggio siano state spinte.
Ovviamente e' consigliato non superare i 2.9v, max 2.95v con una bella ventola sopra!
Questi sono i miei settaggi bios delle Z503:
-Bus: 280/290
-LDT/FSB x3
-16/16
-moltiplicatore: x8-x9
-cool’n quit: disable
-CPU vid startup: startup
-VID control: auto
-VID special: VID*110%
-Dram voltage: 2.7v
-Dram +.03v: enable
RAM
- dram frequency set: 200
- command per clock: enabled (sarebbe l'1T enabled e 2T disabled)
- tlc : 3
- trcd: 3
- tras: 8
- trp : 3
- trc : 10
- trfc: 16
- trrd: 3
- twr : 3
- twtr: 2
- trwt: 3
- tref: 0780
- dram bank interlave: enabled
- dqs control: increase
- dqs value : 0
- dram drive strenght: auto
- dram data drive strenght: lev 1
- max async latency: 08.0 ns
- dram response time: fast
- read preamble time: 05.5 ns
- idle cycle limit: 16 cycles
- dynamic counter: enable
- r/w queue bypass: 16x
- bypass max: 07x
- 32byte granularity: enable
UTENTE: napass
300Mhz (DDR600) 3-3-3-8 @ 2.83 Volts
CAS Latency (TCL) - 3
Command Per Clock (CPC) - Enable (1T)
Row Cycle Time (TRC) - 14
Row Refresh Cycle Time (TRFC) - 16
RAS TO CAS Delay (TRCD) - 3
RAS TO RAS Delay (TRCD) - 3
Min RAS Active Time (TRAS) - 8
Row Precharge Time (TRP) - 3
Write Recovery Time (TWR) - 3
Write To Read Delay Time (TWTR) - 2
Read To Write Delay Time (TRTW) - 3
Refresh Rate (TREF) - 0780
Write CAS Latency (TWCL) - 1
Max Async Latency - 9
Read Preamble - 6
Idle Cycle Limit - 256
------------------------------------------------------------------------
Motherboard: DFI SLI-DR
utente: WwKd
(viaggio solidissimo a 280@2.6v)
Genie BIOS Settings:
FSB Bus Frequency - 280
LDT/FSB Frequency Ratio - Auto
CPU/FSB Frequency Ratio - 9
PCI eXpress Frequency - 100Mhz
CPU VID StartUp Value - 1.50v
CPU VID Control - 1.5v
CPU VID Special Control - +104%
LDT Voltage Control - 1.3v
Chip Set Voltage Control - 1.6v
DRAM Voltage Control - 2.6v
DRAM Configuration Settings:
DRAM Frequency Set - 200 1:1
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 3
RAS# to CAS# delay (Trcd) - 3 Bus Clocks
Min RAS# active time (Tras) - 8 Bus Clocks
Row precharge time (Trp) - 3 Bus Clocks
Row Cycle time (Trc) - 9 Bus Clocks
Row refresh cyc time (Trfc) - 16 Bus Clocks
Row to Row delay (Trrd) - 3 Bus Clocks
Write recovery time (Twr) - 3 Bus Clocks
Write to Read delay (Twtr) - 2 Bus Clocks
Read to Write delay (Trwt) - 3 Bus Clocks
Refresh Period (Tref) - Auto
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled
DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Auto
DRAM Data Drive Strength - Auto
Max Async Latency - Auto
DRAM Response Time - Normal
Read Preamble Time - Auto
IdleCycle Limit - 16 Cycles
Dynamic Counter - Enable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(4 Bursts)
--------------------
UTENTE marco a
io personalmente le ho provate a 285 stabili....
cas 3 3 38
trc 14
trfc 16
trrd 2
trw 2
twtr 2
trtw 3
tref 0780
trwcl 1
drive strenght auto
max async latency 8-9
read premble 6
idle cycle 256
------------------------------------------------------------------------
Motherboard: DFI SLI-DR EXPERT
utente: Joe Latino
daily use
Genie BIOS Settings:
FSB Bus Frequency - 290
LDT/FSB Frequency Ratio - 3x
CPU/FSB Frequency Ratio - 9
PCI eXpress Frequency - 100Mhz
CPU VID StartUp Value - 1.50v
CPU VID Control - 1.5v
CPU VID Special Control - +104% (tot. 1.56/1.57v effettivi)
LDT Voltage Control - 1.4v (1.39 per l'esattezza)
Chip Set Voltage Control - 1.56v
DRAM Voltage Control - 2.84v (ma da windows risultano 2.8v effettivi!!!)
DRAM Configuration Settings:
DRAM Frequency Set - 200 1:1
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 3
RAS# to CAS# delay (Trcd) - 3 Bus Clocks
Min RAS# active time (Tras) - 7 Bus Clocks
Row precharge time (Trp) - 3 Bus Clocks
Row Cycle time (Trc) - 7 Bus Clocks
Row refresh cyc time (Trfc) - 13 Bus Clocks
Row to Row delay (Trrd) - 2 Bus Clocks
Write recovery time (Twr) - 2 Bus Clocks
Write to Read delay (Twtr) - 1 Bus Clocks
Read to Write delay (Trwt) - 3 Bus Clocks
Refresh Period (Tref) - 200
Write CAS Latency (Twcl) - 1 clk
DRAM Bank Interleave - Enabled
DQS Skew Control - off
DQS Skew Value - 0
DRAM Drive Strength - fast (weak)
DRAM Data Drive Strength - fast (weak)
Max Async Latency - 7ns
DRAM Response Time - fast
Read Preamble Time - 5.5ns
IdleCycle Limit - 16 Cycles
Dynamic Counter - Enable
R/W Queue Bypass - 8 x
Bypass Max - 07 x
32 Byte Granularity - Enable
------------------------------------------------------------------------
MB Asus a8n32 deluxe
UTENTE: hiroshi976
ecco i miei timing che mi garantiscono i 270/275 a cas 2.5
Timing della memoria:
CAS Latency (CL) 2.5T
RAS To CAS Delay (tRCD) 3T
RAS Precharge (tRP) 3T
RAS Active Time (tRAS) 6T
Row Cycle Time (tRC) 7T
Row Refresh Cycle Time (tRFC) 13T
Command Rate (CR) 1T
RAS To RAS Delay (tRRD) 2T
Write Recovery Time (tWR) 2T
Read To Write Delay (tRTW) 3T
Write To Read Delay (tWTR) 2T
Write CAS Latency (tWCL) 1T
Refresh Period (tREF) 200 MHz 3.9 us
DQS Skew Control Disattivato
DRAM Drive Strength Weak
DRAM Data Drive Strength 4 (No Reduction)
Max Async Latency 8 ns
Read Preamble Time 6.0 ns
Idle Cycle Limit 16
Dynamic Idle Cycle Counter Attivo
Read/Write Queue Bypass 8
Bypass Max 4
32-byte Granularity Disattivato
arrivo a 2.70v rs a 300mhz 3-3-3-7...
salendo a 2.80v faccio i 310mhz..... sempre a 3-3-3-7
il tutto testato con memtest (circa 1ora e mezza a fsb)
oltre non me la sono sentita di andare...sia come mhz che come voltaggi....non si sa' mai!
-----------------------------------------------------------------------
------------------------------------------------------------------------
APERTURA RMA IN CASO DI GUASTO
Visti i continui decessi per queste ram, riportiamo la procedura da seguire per avere il numero di RMA:
RMA RAM CRUCIAL.
1)Andate qui:
http://www.crucial.com/eu/company/co...sp?tag=general
2)Una volta nella pagina considerate questa alternativa:"Crucial Technology Mailing Addresses" e cliccate su:"Customer Support Department".
3)Fatto questo si apre questa pagina:
http://www.crucial.com/eu/support/co...vice_email.asp
Inserite i dati, Order number lasciatelo vuoto, descrivete che le ram sono rotte e selezionate:"I have a warranty question".Chiedete dove potete spedire le ram per avere la sostituzione.
4)Dopo aver fatto quanto sopra...cliccate su "SEND E-MAIL"
5)Aspettete e vi risponderanno dove spedirle.
Ciao
AGGIORNAMENTO ( HANNO CAMBIATO IL SITO )
Per richiedere RMA andate qui e inserite i dati.
http://www.crucial.com/eu/support/co...ARRANTY_RETURN
Quando vi arrivera' la loro prima mail dove vi chiedono tutti i vostri dati, NON RISPONDETE alla loro mail, non verra' mai letta!! Continuate a scrivere sempre dal loro sito come avete gia' fatto!
PER LA SPEDIZIONE:
SPEDIZIONE PREVIO BUSTA POSTALE:
prendi una busta imbottita (dimensioni minime 10*14) e vai alla posta.
digli che vuoi spedire una lettera assicurata in GB x l'importo di 250€
prezzo circa 10€.
arriva in 5-8 giorni lavorativi.
metti mittente (metti tra parentesi from) e destinatario (to) (non si sa mai sono inglesi e li capirei se non sapessero differenza tra termine mittente e destinatario nn conoscono la ns lingua...) e il numero rma; il gioco e' fatto.
Per regola alle poste, per spedire in assicurata per 250€, la busta imbottita doveva essere chiusa da 5 sigilli ( i 4 angoli + 1 nel centro ), per sigilli si intende 1 goccia di ceralacca colata ( una candela di ceralacca si compra ad esempio da buffetti per 1€ e la potete far colare scaldando con 1 accendino )
Avete presente i film ambientati nell'800, dove le buste bianche venivano chiuse dalla cera e timbrate con un proprio sigillo? ( normalmente 1 anello o timbro ), ecco, in Italia abbiamo leggi che si basano ancora su quello.
Quindi non fate altro che mettere cera nei 4 angoli e in mezzo e la busta ve la spediranno senza problemi ( senza bisogno di timbro )
Oppure assicuratela per 50€, spendete un po' meno e tanto arrivera' lo stesso
Qui sotto riporto le email spedite dall'utente GrrPulcy e ricevute dalla crucial, che potete usare come riferimento...( ovviamente dovrete almeno cambiare i vostri dati ed eventuali vostri test )
PRIMA MAIL
Hello R.,
Thank you for your enquiry. We will exchange the part under warranty. However we
require your order number or if you did not order directly from us please
provide your full name and address including phone number and the part numbers
on the faulty module.
Please note, due to quality and tracking reasons removal/tampering with the
Crucial Warranty label or modification to Crucial product will result in Crucial
not accepting your request to return the product. Therefore any product received
in such condition will be returned to you.
Kind regards,
S. M.
Customer Sales & Support Agent
Tel: +44 (0)1355 586 100
Fax: +44 (0)1355 586 101
mailto:crucialeusupport@micron.com
Crucial Technology -- The Memory Experts(SM)
http://www.crucial.com/uk
-----Original Message-----
From: *****************@******.***
To: crucialeusupport
Subject: FAQ:
title:
2*1GB crucial Ballistics tracer pc4000 (micron -5b d) problem:
Hi, after 6 month having that ram I encountered some problems about stability system.
The kit freezes my pc with blue screen;
I tested @stock speed of 250MHz (3 4 4 10 timings 2,8v) and JEDEC speeds (3 4 4 8 2,5v) (usually i use it @240 3336 2,65V) with memtest and goldmemory receiving
lot of errors (about 576 in a single loop of memtest )
I've a dfi ultra-d mainboard, I tried to change the bios using 623-3official
0406official 704-2bta (any others bios encounter problems during boot) finding no solutions.
How to start an RMA procedure?
I'll sign you the kit specs: BL12864Z503 BATCH ******.** PN *****. Do you need
some other specs? Thanks for your support, waiting for an answer I ask regrets for my bad english (I'm italian)
Kind Regards.
R. S.
-----------------
SECONDA MAIL
Hello R.,
Thank you for the details. Your Returns Material Authorisation number is
********.
Please return your item in its original packaging to our address (shown below)
writing the RMA number clearly on the package. When we receive it we will ship
out a replacement ref ********. Please return by Post (insured shipping method)
to ensure contents and credit, as proof of posting is not acceptable.
Please note, due to quality and tracking reasons removal/tampering with the
Crucial Warranty label or modification to Crucial product will result in Crucial
not accepting your request to return the product. Therefore any product received
in such condition will be returned to you.
Please send to:
Crucial Technology Europe
RMA 40578128
12 Redwood Crescent
Peel Park Campus
East Kilbride
G74 5PA
United Kingdom
This RMA is valid for 10 working days, and should be returned to us within this
time. Failure to do so will delay the shipping of your replacement.
If your address details have changed since your original order, please reply to
this mail quoting your RMA number as reference, with your updated details.
If you have any further questions please don't hesitate to contact us (for a
faster response please reply directly to this email).
To check on pricing or to place an order please follow the Crucial Product
Search link on the top right of our web site home page
(
http://www.crucial.com/uk) or call us on 0800 013 0330. All prices listed are
only valid for one working day.
Kind regards
A. M.
-----Original Message-----
From: R. S.
To: crucialeusupport
Subject: Ram Problem
Hello S.,
Thanks for your answer. I've purchaserd kit of 2*1GB ram ddr pc4000 crucial
ballistix form
www.************.*** on 21/11/05.
This is my address:
n°*** ********** street
10126 TORINO
ITALY
Full Name: R. S.
Tel: +39 0*******
Mobile Phone: +39 3*******
Ram specs:
Part Number: BL12864Z503
Batch: *****.**
PN: *****
(both of them have the same Batch and PN)
Bar code on the original box: 0 ****** ******
Conditions of ram: like new
- How&Where to send You the modules?
- For the RMA code?
- Do you need something else?
Problem with that ram started about 2 weeks ago, when I touched the
heatspreader I noticed that they were too hot!
Waiting for an answer I offer my Best Regards,
R.S.
-------------
TERZA MAIL
Hi R.,
Thank you for letting us know.
Kind regards,
J. F. P.
-----Original Message-----
From: R. S.
To: crucialeusupport
Cc: **************@******.***
Subject: RMA: *********
Packet sent you with insured shipping n° *************
on 07/06/2006.
For tracking number look at the link below:
http://www.poste.it/online/dovequando/assicurata.shtml
or directly by clicking the link above:
http://www.poste.it/online/dovequan...=07%2F06%2F2006
Kind Regards
R. S.
-------------
QUARTA MAIL
Dear R. S.,
We're writing to let you know that on June 12, 2006, our RMA lab
received your returned product under RMA #********.
Your RMA is now being processed as you requested.
We appreciate your business and are processing your request as quickly
as possible. If you have further questions, please don't hesitate to
contact us. For faster service, be sure to reference your customer
ID *******.
--------
Per ora sono fermo qua in attesa della conferma della loro spedizione...
fate solo occhio che nei post prima ce la loro risposta poi il mio messaggio originale...
fate pure copia ed incolla ma attendete almeno il 15 che sono sicuro della loro spedizione, ove possibile cambiate almeno qualkosina o chissa' che pensano quelli...
--------------