Hardware Upgrade Forum

Hardware Upgrade Forum (https://www.hwupgrade.it/forum/index.php)
-   Linux, Unix, OS alternativi (https://www.hwupgrade.it/forum/forumdisplay.php?f=34)
-   -   problema installazione driver ati (https://www.hwupgrade.it/forum/showthread.php?t=839470)


Janky 18-12-2004 21:40

problema installazione driver ati
 
Che bello :D un'altro errore, ora non mi parte neanche più X (per la cronaca sto scrivendo da lynx :D)
ho installato i driver ati ufficiali, tramite alien li ho convertiti da rpm a deb e li ho installati, all'inizio mi dava un errore dicendo che non poteva sovrascrivere i driver mesa, allora ho forzato l'installazione...
ho dato fglrxconfig, ho configurato e ho riavviato, ora non parte più X e non riesco a capire il perchè, aiutatemi ad interpretare il log!

wubby 18-12-2004 21:56

Re: problema installazione driver ati
 
Quote:

Originariamente inviato da Janky
ho dato fglrxconfig, ho configurato e ho riavviato, ora non parte più X e non riesco a capire il perchè, aiutatemi ad interpretare il log!
mostra il log... :p

Janky 18-12-2004 22:00

sì, ma come faccio con lynx?:confused:

wubby 18-12-2004 22:04

Quote:

Originariamente inviato da Janky
sì, ma come faccio con lynx?:confused:
dpkg-reconfigure xserver-xfree86

metti vesa e vedi se riesci ad avere un minimo di grafica ;)

Janky 18-12-2004 22:17

here we go!!!!!!:)

ed ora?

wubby 18-12-2004 22:18

Quote:

Originariamente inviato da Janky
here we go!!!!!!:)
ed ora?
Pialla il pacchetto che ha fatto danni :-)

Janky 18-12-2004 22:20

ma io li voglio i driver ati....:cry:

wubby 18-12-2004 22:26

riconfigura X mettendo ati o quello che è e controlla /var/log/XFree86.0.log per capire cosa non va...

Janky 18-12-2004 22:31

tutte le volte che ho messo ati non è mai funzionato :(

le prime volte che installavo una distro linux non partiva mai X se lo mettevo

provo giusto per vedere cosa dice il log

Janky 18-12-2004 22:36

ma intendevi di usare ancora questo comando:
dpkg-reconfigure xserver-xfree86?

ogni volta che selezionavo ati durante l'installazione non faceva partire X, ora va....:confused:

wubby 18-12-2004 22:44

Quote:

Originariamente inviato da Janky
ma intendevi di usare ancora questo comando:
dpkg-reconfigure xserver-xfree86?
Zi
Quote:

ogni volta che selezionavo ati durante l'installazione non faceva partire X, ora va....:confused:
Mah... non sono in grado di dare risposte certe... :fagiano:

p.s.
Codice:

glxinfo | grep direct
che dice? :oink:

Janky 18-12-2004 22:46

direct rendering: No
OpenGL renderer string: Mesa GLX Indirect


Janky 18-12-2004 23:12

cacchio, ma su slackware c'ero riuscito...

wubby 18-12-2004 23:24

Quote:

Originariamente inviato da Janky
cacchio, ma su slackware c'ero riuscito...
mostra i log di /var/log
mostra /etc/X11/XF86Config-4

Janky 18-12-2004 23:47

questo è quello di /var/log

Codice:

XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-9 20041209161604 fabbione@fabbione.net)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.26 i686 [ELF]
Build Date: 09 December 2004

This version of XFree86 has been extensively modified by the Debian
Project, and is not supported by the XFree86 Project, Inc., in any
way.  Bugs should be reported to the Debian Bug Tracking System; see
<URL: http://www.debian.org/Bugs/Reporting >.

We strongly encourage the use of the "reportbug" package and command
to ensure that bug reports contain as much useful information as
possible.

Before filing a bug report, you may want to consult the Debian X FAQ:
      XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml
  plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz

Module Loader present
OS Kernel: Linux version 2.6.9-1-386 (dilinger@toaster.hq.voxel.net) (gcc version 3.3.5 (Debian 1:3.3.5-2)) #1 Thu Nov 25 02:52:40 EST 2004
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Dec 18 23:28:38 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) |  |-->Monitor "Monitor0"
(**) |  |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "it"
(**) XKB: layout: "it"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
        XFree86 ANSI C Emulation: 0.2
        XFree86 Video Driver: 0.6
        XFree86 XInput driver : 0.4
        XFree86 Server Extension : 0.2
        XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0655 card 1039,0655 rev 50 class 06,00,00 hdr 80
(II) PCI: 00:01:0: chip 1039,0003 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 1039,0964 card 0000,0000 rev 36 class 06,01,00 hdr 80
(II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:02:7: chip 1039,7012 card 1458,a002 rev a0 class 04,01,00 hdr 00
(II) PCI: 00:03:0: chip 1039,7001 card 1039,7001 rev 0f class 0c,03,10 hdr 80
(II) PCI: 00:03:1: chip 1039,7001 card 1039,7001 rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:2: chip 1039,7001 card 1039,7001 rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:3: chip 1039,7002 card 1458,5004 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:0b:0: chip 1102,0007 card 1102,1002 rev 00 class 04,01,00 hdr 80
(II) PCI: 00:0b:1: chip 1102,7005 card 1102,1002 rev 00 class 09,80,00 hdr 80
(II) PCI: 00:0c:0: chip 1186,1300 card 1186,1303 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:11:0: chip 104c,8024 card 1458,1000 rev 00 class 0c,00,10 hdr 00
(II) PCI: 01:00:0: chip 1002,4150 card 174b,7c19 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4170 card 174b,7c18 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1        0        0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 I/O range:
        [0] -1        0        0x0000c000 - 0x0000c0ff (0x100) IX[b]
        [1] -1        0        0x0000c400 - 0x0000c4ff (0x100) IX[b]
        [2] -1        0        0x0000c800 - 0x0000c8ff (0x100) IX[b]
        [3] -1        0        0x0000cc00 - 0x0000ccff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
        [0] -1        0        0xf4000000 - 0xf5ffffff (0x2000000) MX[b]
(II) Bus 1 prefetchable memory range:
        [0] -1        0        0xd0000000 - 0xefffffff (0x20000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x4150) rev 0, Mem @ 0xd0000000/28, 0xf5000000/16, I/O @ 0xc000/8
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x4170) rev 0, Mem @ 0xe0000000/28, 0xf5010000/16
(II) Addressable bus resource ranges are
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX[b]
        [1] -1        0        0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[b](B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[b]
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[b]
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [5] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[b]
        [6] -1        0        0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xf0000000 from 0xf3ffffff to 0xefffffff
(II) Active PCI resource ranges:
        [0] -1        0        0xf6000000 - 0xf6003fff (0x4000) MX[b]
        [1] -1        0        0xf6008000 - 0xf60087ff (0x800) MX[b]
        [2] -1        0        0xf6007000 - 0xf60070ff (0x100) MX[b]
        [3] -1        0        0xf6006000 - 0xf6006fff (0x1000) MX[b]
        [4] -1        0        0xf6005000 - 0xf6005fff (0x1000) MX[b]
        [5] -1        0        0xf6004000 - 0xf6004fff (0x1000) MX[b]
        [6] -1        0        0xf6009000 - 0xf6009fff (0x1000) MX[b]
        [7] -1        0        0xf0000000 - 0xefffffff (0x0) MX[b]O
        [8] -1        0        0xf5010000 - 0xf501ffff (0x10000) MX[b](B)
        [9] -1        0        0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
        [10] -1        0        0xf5000000 - 0xf500ffff (0x10000) MX[b](B)
        [11] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
        [12] -1        0        0x0000e800 - 0x0000e8ff (0x100) IX[b]
        [13] -1        0        0x0000e400 - 0x0000e407 (0x8) IX[b]
        [14] -1        0        0x0000e000 - 0x0000e01f (0x20) IX[b]
        [15] -1        0        0x0000dc00 - 0x0000dc7f (0x80) IX[b]
        [16] -1        0        0x0000d800 - 0x0000d8ff (0x100) IX[b]
        [17] -1        0        0x0000f000 - 0x0000f00f (0x10) IX[b]
        [18] -1        0        0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
        [0] -1        0        0xf6000000 - 0xf6003fff (0x4000) MX[b]
        [1] -1        0        0xf6008000 - 0xf60087ff (0x800) MX[b]
        [2] -1        0        0xf6007000 - 0xf60070ff (0x100) MX[b]
        [3] -1        0        0xf6006000 - 0xf6006fff (0x1000) MX[b]
        [4] -1        0        0xf6005000 - 0xf6005fff (0x1000) MX[b]
        [5] -1        0        0xf6004000 - 0xf6004fff (0x1000) MX[b]
        [6] -1        0        0xf6009000 - 0xf6009fff (0x1000) MX[b]
        [7] -1        0        0xf0000000 - 0xefffffff (0x0) MX[b]O
        [8] -1        0        0xf5010000 - 0xf501ffff (0x10000) MX[b](B)
        [9] -1        0        0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
        [10] -1        0        0xf5000000 - 0xf500ffff (0x10000) MX[b](B)
        [11] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
        [12] -1        0        0x0000e800 - 0x0000e8ff (0x100) IX[b]
        [13] -1        0        0x0000e400 - 0x0000e407 (0x8) IX[b]
        [14] -1        0        0x0000e000 - 0x0000e01f (0x20) IX[b]
        [15] -1        0        0x0000dc00 - 0x0000dc7f (0x80) IX[b]
        [16] -1        0        0x0000d800 - 0x0000d8ff (0x100) IX[b]
        [17] -1        0        0x0000f000 - 0x0000f00f (0x10) IX[b]
        [18] -1        0        0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[b](B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[b]
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[b]
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [5] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[b]
        [6] -1        0        0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[b](B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[b]
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[b]
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [5] -1        0        0xf6000000 - 0xf6003fff (0x4000) MX[b]
        [6] -1        0        0xf6008000 - 0xf60087ff (0x800) MX[b]
        [7] -1        0        0xf6007000 - 0xf60070ff (0x100) MX[b]
        [8] -1        0        0xf6006000 - 0xf6006fff (0x1000) MX[b]
        [9] -1        0        0xf6005000 - 0xf6005fff (0x1000) MX[b]
        [10] -1        0        0xf6004000 - 0xf6004fff (0x1000) MX[b]
        [11] -1        0        0xf6009000 - 0xf6009fff (0x1000) MX[b]
        [12] -1        0        0xf0000000 - 0xefffffff (0x0) MX[b]O
        [13] -1        0        0xf5010000 - 0xf501ffff (0x10000) MX[b](B)
        [14] -1        0        0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
        [15] -1        0        0xf5000000 - 0xf500ffff (0x10000) MX[b](B)
        [16] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
        [17] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[b]
        [18] -1        0        0x00000000 - 0x000000ff (0x100) IX[b]
        [19] -1        0        0x0000e800 - 0x0000e8ff (0x100) IX[b]
        [20] -1        0        0x0000e400 - 0x0000e407 (0x8) IX[b]
        [21] -1        0        0x0000e000 - 0x0000e01f (0x20) IX[b]
        [22] -1        0        0x0000dc00 - 0x0000dc7f (0x80) IX[b]
        [23] -1        0        0x0000d800 - 0x0000d8ff (0x100) IX[b]
        [24] -1        0        0x0000f000 - 0x0000f00f (0x10) IX[b]
        [25] -1        0        0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.2
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 2.0.2
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o":  No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany"
        compiled for 4.3.0.1, module version = 3.14.6
        Module class: XFree86 Video Driver
        ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        Module class: XFree86 XInput Driver
        ABI class: XFree86 XInput driver, version 0.4
(II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000),
        ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig (R9000),
        ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9),
        ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO),
        ATI RV280 Ya (R9200LE), ATI RV250SE Yd (R9200SE),
        ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500),
        ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500),
        ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600),
        ATI RV350SE AQ (R9600SE), ATI RV350 AR (R9600 PRO),
        ATI RV350 NP (M10), ATI R300 AD (R9500), ATI R300 AE (R9500),
        ATI R300 AF (R9500), ATI R300 AG (Fire GL Z1/X1),
        ATI R300 ND (R9700 PRO), ATI R300 NE (R9700/R9500 PRO),
        ATI R300 NF (R9600 TX), ATI R300 NG (Fire GL X1),
        ATI R350SE AH (R9800SE), ATI R350 AK (Fire GL unknown),
        ATI RV350 AS (Fire GL T2), ATI RV350 AT (Fire GL T2),
        ATI RV350 AU (Fire GL T2), ATI RV350 AV (Fire GL T2),
        ATI RV350 AW (Fire GL T2), ATI R350 NH (R9800),
        ATI R350LE NI (R9800LE), ATI R350 NJ (R9800),
        ATI R350 NK (Fire GL X2), ATI RV350 NT (WS/M10), ATI RV370 5B60,
        ATI RV370 5B61, ATI RV370 5B62, ATI RV370 5B63, ATI RV370 5B64,
        ATI RV370 5B66, ATI RV370 5B67, ATI RV370 5B70, ATI RV370 5B71,
        ATI RV370 5B72, ATI RV370 5B73, ATI RV370 5460, ATI RV370 5461,
        ATI RV370 5462, ATI RV370 5463, ATI RV370 5464, ATI RV370 5465,
        ATI RV370 5466, ATI RV370 5467, ATI RV370 5470, ATI RV370 5471,
        ATI RV370 5472, ATI RV370 5473, ATI RV380 AP, ATI RV380 AQ,
        ATI RV380 AR, ATI RV380 AS, ATI RV380 AT, ATI RV380 AU, ATI RV380 AV,
        ATI RV380 AW, ATI RV380 AP2, ATI RV380 AQ2, ATI RV380 AR2,
        ATI RV380 AS2, ATI RV380 NP, ATI RV380 NQ, ATI RV380 NR,
        ATI RV380 NS, ATI RV380 NT, ATI RV380 NU, ATI RV380 NV, ATI RV380 NW,
        ATI RV380 NP2, ATI RV380 NQ2, ATI RV380 NR2, ATI RV380 NS2,
        ATI R420 JH, ATI R420 JI, ATI R420 JJ, ATI R420 JK, ATI R420 JL,
        ATI R420 JM, ATI R420 JN, ATI R420 JP, ATI R423 UH, ATI R423 UI,
        ATI R423 UJ, ATI R423 UK, ATI R423 UL, ATI R423 UM, ATI R423 ]W,
        ATI R423 UP, ATI R423 UQ, ATI R423 UR, ATI R423 UT, ATI R423 ]H,
        ATI R423 ]I, ATI RV410 VJ, ATI RV410 VK, ATI RV410 VL, ATI RV410 VM,
        ATI RV410 ^H, ATI RV410 ^I, ATI RV410 ^J, ATI RV410 ^K, ATI RV410 ^L,
        ATI RV410 ^M, ATI RV410 ^O, ATI RV410 VR, ATI RV410 VS, ATI RV410 ^R,
        ATI RV410 ^S, ATI RV410 ^U, ATI RS300 IGP, ATI RS350 IGP,
        ATI RS300M IGP
(II) Primary Device is: PCI 01:00:0
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset ATI RV350 AP (R9600) found
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[b](B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[b]
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[b]
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [5] -1        0        0xf6000000 - 0xf6003fff (0x4000) MX[b]
        [6] -1        0        0xf6008000 - 0xf60087ff (0x800) MX[b]
        [7] -1        0        0xf6007000 - 0xf60070ff (0x100) MX[b]
        [8] -1        0        0xf6006000 - 0xf6006fff (0x1000) MX[b]
        [9] -1        0        0xf6005000 - 0xf6005fff (0x1000) MX[b]
        [10] -1        0        0xf6004000 - 0xf6004fff (0x1000) MX[b]
        [11] -1        0        0xf6009000 - 0xf6009fff (0x1000) MX[b]
        [12] -1        0        0xf0000000 - 0xefffffff (0x0) MX[b]O
        [13] -1        0        0xf5010000 - 0xf501ffff (0x10000) MX[b](B)
        [14] -1        0        0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
        [15] -1        0        0xf5000000 - 0xf500ffff (0x10000) MX[b](B)
        [16] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
        [17] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[b]
        [18] -1        0        0x00000000 - 0x000000ff (0x100) IX[b]
        [19] -1        0        0x0000e800 - 0x0000e8ff (0x100) IX[b]
        [20] -1        0        0x0000e400 - 0x0000e407 (0x8) IX[b]
        [21] -1        0        0x0000e000 - 0x0000e01f (0x20) IX[b]
        [22] -1        0        0x0000dc00 - 0x0000dc7f (0x80) IX[b]
        [23] -1        0        0x0000d800 - 0x0000d8ff (0x100) IX[b]
        [24] -1        0        0x0000f000 - 0x0000f00f (0x10) IX[b]
        [25] -1        0        0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x820b248
(II) resource ranges after probing:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[b](B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[b]
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[b]
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [5] -1        0        0xf6000000 - 0xf6003fff (0x4000) MX[b]
        [6] -1        0        0xf6008000 - 0xf60087ff (0x800) MX[b]
        [7] -1        0        0xf6007000 - 0xf60070ff (0x100) MX[b]
        [8] -1        0        0xf6006000 - 0xf6006fff (0x1000) MX[b]
        [9] -1        0        0xf6005000 - 0xf6005fff (0x1000) MX[b]
        [10] -1        0        0xf6004000 - 0xf6004fff (0x1000) MX[b]
        [11] -1        0        0xf6009000 - 0xf6009fff (0x1000) MX[b]
        [12] -1        0        0xf0000000 - 0xefffffff (0x0) MX[b]O
        [13] -1        0        0xf5010000 - 0xf501ffff (0x10000) MX[b](B)
        [14] -1        0        0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
        [15] -1        0        0xf5000000 - 0xf500ffff (0x10000) MX[b](B)
        [16] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
        [17] 0        0        0x000a0000 - 0x000affff (0x10000) MS[b]
        [18] 0        0        0x000b0000 - 0x000b7fff (0x8000) MS[b]
        [19] 0        0        0x000b8000 - 0x000bffff (0x8000) MS[b]
        [20] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[b]
        [21] -1        0        0x00000000 - 0x000000ff (0x100) IX[b]
        [22] -1        0        0x0000e800 - 0x0000e8ff (0x100) IX[b]
        [23] -1        0        0x0000e400 - 0x0000e407 (0x8) IX[b]
        [24] -1        0        0x0000e000 - 0x0000e01f (0x20) IX[b]
        [25] -1        0        0x0000dc00 - 0x0000dc7f (0x80) IX[b]
        [26] -1        0        0x0000d800 - 0x0000d8ff (0x100) IX[b]
        [27] -1        0        0x0000f000 - 0x0000f00f (0x10) IX[b]
        [28] -1        0        0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
        [29] 0        0        0x000003b0 - 0x000003bb (0xc) IS[b]
        [30] 0        0        0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 0.1.0
        ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "0x00000000"
(**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO"
(**) fglrx(0): Option "HSync2" "unspecified"
(**) fglrx(0): Option "VRefresh2" "unspecified"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "yes"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "NoTV" "yes"
(**) fglrx(0): Option "TVStandard" "NTSC-M"
(**) fglrx(0): Option "TVHSizeAdj" "0"
(**) fglrx(0): Option "TVVSizeAdj" "0"
(**) fglrx(0): Option "TVHPosAdj" "0"
(**) fglrx(0): Option "TVVPosAdj" "0"
(**) fglrx(0): Option "TVHStartAdj" "0"
(**) fglrx(0): Option "TVColorAdj" "0"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(**) fglrx(0): Qbs disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "ATI RV350 AP (R9600)" (Chipset = 0x4150)
(--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x7c19)
(--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xf5000000
(--) fglrx(0): ChipExtRevID = 0x00
(--) fglrx(0): ChipIntRevID = 0x04
(--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.2.0
        ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(**) fglrx(0): MonitorLayout Option:
        Monitor1--Type AUTO, Monitor2--Type AUTO

(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 0
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 1
(II) fglrx(0): Primary head:
 Monitor  -- NONE
 Connector -- DVI-I
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- Internal
 DDC Type  -- DVI_DDC
(II) fglrx(0): Secondary head:
 Monitor  -- CRT
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- VGA_DDC
(II) fglrx(0): EDID data from the display on Secondary head ---------------------------
(II) fglrx(0): Manufacturer: SAM  Model: a3  Serial#: 1197027639
(II) fglrx(0): Year: 2003  Week: 35
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync:  Separate  Composite
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 34  vert.: 27
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.633 redY: 0.351  greenX: 0.298 greenY: 0.592
(II) fglrx(0): blueX: 0.143 blueY: 0.092  whiteX: 0.316 whiteY: 0.337
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
(II) fglrx(0): #1: hsize: 1024  vsize 768  refresh: 75  vid: 20321
(II) fglrx(0): #2: hsize: 800  vsize 600  refresh: 75  vid: 20293
(II) fglrx(0): #3: hsize: 640  vsize 480  refresh: 60  vid: 16433
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz  Image Size:  338 x 270 mm
(II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Ranges: V min: 56  V max: 75 Hz, H min: 30  H max: 81 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: SyncMaster
(II) fglrx(0): Serial No: HMEW814636
(II) fglrx(0):
(II) fglrx(0): DesktopSetup 0x0000
(**) fglrx(0):  PseudoColor visuals disabled
(**) fglrx(0): Overlay disabled
(**) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total 5 valid mode(s) found.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Default mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024"  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync
(**) fglrx(0):  Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
(II) fglrx(0): Modeline "1024x768"  78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(**) fglrx(0):  Default mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
(II) fglrx(0): Modeline "832x624"  57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
(II) fglrx(0): Modeline "800x600"  50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"  31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(--) fglrx(0): Display dimensions: (340, 270) mm
(--) fglrx(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 0.1.0
        ABI class: XFree86 Video Driver, version 0.6
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.1.0
        ABI class: XFree86 Video Driver, version 0.6
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany"
        compiled for 4.3.0.1, module version = 3.14.6
        ABI class: XFree86 Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x00000afe
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: yes
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] 0        0        0xf5000000 - 0xf500ffff (0x10000) MX[b]
        [1] 0        0        0xd0000000 - 0xdfffffff (0x10000000) MX[b]
        [2] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[b](B)
        [3] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [4] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[b]
        [5] -1        0        0x000c0000 - 0x000effff (0x30000) MX[b]
        [6] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [7] -1        0        0xf6000000 - 0xf6003fff (0x4000) MX[b]
        [8] -1        0        0xf6008000 - 0xf60087ff (0x800) MX[b]
        [9] -1        0        0xf6007000 - 0xf60070ff (0x100) MX[b]
        [10] -1        0        0xf6006000 - 0xf6006fff (0x1000) MX[b]
        [11] -1        0        0xf6005000 - 0xf6005fff (0x1000) MX[b]
        [12] -1        0        0xf6004000 - 0xf6004fff (0x1000) MX[b]
        [13] -1        0        0xf6009000 - 0xf6009fff (0x1000) MX[b]
        [14] -1        0        0xf0000000 - 0xefffffff (0x0) MX[b]O
        [15] -1        0        0xf5010000 - 0xf501ffff (0x10000) MX[b](B)
        [16] -1        0        0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
        [17] -1        0        0xf5000000 - 0xf500ffff (0x10000) MX[b](B)
        [18] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
        [19] 0        0        0x000a0000 - 0x000affff (0x10000) MS[b]
        [20] 0        0        0x000b0000 - 0x000b7fff (0x8000) MS[b]
        [21] 0        0        0x000b8000 - 0x000bffff (0x8000) MS[b]
        [22] 0        0        0x0000c000 - 0x0000c0ff (0x100) IX[b]
        [23] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[b]
        [24] -1        0        0x00000000 - 0x000000ff (0x100) IX[b]
        [25] -1        0        0x0000e800 - 0x0000e8ff (0x100) IX[b]
        [26] -1        0        0x0000e400 - 0x0000e407 (0x8) IX[b]
        [27] -1        0        0x0000e000 - 0x0000e01f (0x20) IX[b]
        [28] -1        0        0x0000dc00 - 0x0000dc7f (0x80) IX[b]
        [29] -1        0        0x0000d800 - 0x0000d8ff (0x100) IX[b]
        [30] -1        0        0x0000f000 - 0x0000f00f (0x10) IX[b]
        [31] -1        0        0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
        [32] 0        0        0x000003b0 - 0x000003bb (0xc) IS[b]
        [33] 0        0        0x000003c0 - 0x000003df (0x20) IS[b]
(II) fglrx(0): UMM area:    0xd0701000 (size=0x078ff000)
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(II) fglrx(0): detected XFree86 version: 4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(II) fglrx(0): [drm] drmOpen failed
(EE) fglrx(0): DRIScreenInit failed!
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)            *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x08000000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 1024)
(II) fglrx(0): Largest offscreen area available: 1280 x 7163
(**) Option "dpms"
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        Solid Horizontal and Vertical Lines
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                32 128x128 slots
                32 256x256 slots
                16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
AUDIT: Sat Dec 18 23:28:44 2004: 6357 X: client 5 rejected from local host


Janky 18-12-2004 23:49

questo è xfreeconfig

Codice:

# File: XF86Config-4
# File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"          # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"  # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"  # libglx.a
    Load        "dri"  # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath        "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

#    FontPath  "/usr/X11R6/lib/X11/fonts/local/"
    FontPath  "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath  "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath  "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath  "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath  "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath  "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath  "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier        "Keyboard1"
    Driver        "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option "Protocol"  "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"

#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"  "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"  "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"  "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"  "xfree86"
#    Option "XkbModel"  "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""

#    Option "XkbDisable"

    Option "XkbRules"        "xfree86"
    Option "XkbModel"        "pc105"
    Option "XkbLayout"        "it"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier        "Mouse1"
    Driver "mouse"
    Option "Protocol"  "ImPS/2"
    Option "ZAxisMapping"  "4 5"
    Option "Device"    "/dev/psaux"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"  "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"  "9600"
#    Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver    "magellan"
#    Option    "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver    "spaceorb"
#    Option    "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver    "microtouch"
#    Option    "Device"        "/dev/ttyS0"
#    Option    "MinX"          "1412"
#    Option    "MaxX"          "15184"
#    Option    "MinY"          "15372"
#    Option    "MaxY"          "1230"
#    Option    "ScreenNumber"  "0"
#    Option    "ReportingMode"  "Scaled"
#    Option    "ButtonNumber"  "1"
#    Option    "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver    "elo2300"
#    Option    "Device"        "/dev/ttyS0"
#    Option    "MinX"          "231"
#    Option    "MaxX"          "3868"
#    Option    "MinY"          "3858"
#    Option    "MaxY"          "272"
#    Option    "ScreenNumber"  "0"
#    Option    "ReportingMode"  "Scaled"
#    Option    "ButtonThreshold"    "17"
#    Option    "ButtonNumber"  "1"
#    Option    "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync  31.5 - 48.4
    VertRefresh 60 - 75
    Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName  "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset    "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

#    BusID      "PCI:0:10:0"

#    VideoRam    256

#    Clocks      25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                  "no"
    Option "no_dri"                    "no"
# === misc DRI settings ===
    Option "mtrr"                      "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"              "0x00000000"
    Option "MonitorLayout"              "AUTO, AUTO"
    Option "IgnoreEDID"                "off"
    Option "HSync2"                    "unspecified"
    Option "VRefresh2"                  "unspecified"
    Option "ScreenOverlap"              "0"
# === TV-out Management ===
    Option "NoTV"                      "yes"   
    Option "TVStandard"                "NTSC-M"   
    Option "TVHSizeAdj"                "0"   
    Option "TVVSizeAdj"                "0"   
    Option "TVHPosAdj"                  "0"   
    Option "TVVPosAdj"                  "0"   
    Option "TVHStartAdj"                "0"   
    Option "TVColorAdj"                "0"   
    Option "GammaCorrectionI"          "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"              "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"              "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#      will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"        "off"
# === QBS Management ===
    Option "Stereo"                    "off"
    Option "StereoSyncEnable"          "1"
# === FSAA Management ===
    Option "FSAAEnable"                "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"          "no"
    Option "FSAACustomizeMSPos"        "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                "0"
    Option "BlockSignalsOnLock"        "on"
    Option "UseInternalAGPGART"        "yes"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=4150
    Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor    "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth      24
        Modes      "1280x1024"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual    1280 1024
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

    Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###


wubby 19-12-2004 00:02

ancora una cosa :)

lsmod

Janky 19-12-2004 00:05

minchia quanti!
Codice:

ipv6                  227968  51
eth1394                20360  0
ohci1394              31876  0
ieee1394              102840  2 eth1394,ohci1394
emu10k1_gp              3840  0
ehci_hcd              28036  0
joydev                  9408  0
usbhid                29248  0
ohci_hcd              19204  0
usbcore              104676  5 ehci_hcd,usbhid,ohci_hcd
snd_intel8x0          31820  2
snd_ac97_codec        61520  1 snd_intel8x0
snd_pcm_oss            47400  0
snd_mixer_oss          16640  2 snd_pcm_oss
snd_pcm                85256  2 snd_intel8x0,snd_pcm_oss
snd_timer              23172  1 snd_pcm
snd_page_alloc          9608  2 snd_intel8x0,snd_pcm
snd_mpu401_uart        7168  1 snd_intel8x0
snd_rawmidi            22820  1 snd_mpu401_uart
snd_seq_device          7816  1 snd_rawmidi
snd                    50276  11 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore              9696  2 snd
pci_hotplug            30512  0
sis_agp                8068  1
agpgart                31656  1 sis_agp
analog                10656  0
gameport                4608  3 emu10k1_gp,snd_intel8x0,analog
parport_pc            33604  0
parport                37192  1 parport_pc
floppy                54864  0
tsdev                  7360  0
mousedev              11032  1
psmouse                19208  0
pcspkr                  3688  0
rtc                    12088  0
evdev                  9088  0
nls_cp437              5888  1
dm_mod                51580  0
capability              4744  0
commoncap              7040  1 capability
ntfs                  90352  1
8139too                23936  0
mii                    4736  1 8139too
crc32                  4480  1 8139too
af_packet              20744  0
ext3                  108520  0
jbd                    55704  1 ext3
ide_generic            1536  0
sis5513                15240  1
ide_disk              17792  3
ide_core              128112  3 ide_generic,sis5513,ide_disk
sd_mod                16656  0
ata_piix                8580  0
libata                39556  1 ata_piix
scsi_mod              115532  2 sd_mod,libata
unix                  25780  516
fbcon                  35136  0
font                    8448  1 fbcon
vesafb                  6816  0
cfbcopyarea            3968  1 vesafb
cfbimgblt              3072  1 vesafb
cfbfillrect            3584  1 vesafb


wubby 19-12-2004 00:14

Codice:

[drm] failed to load kernel module "fglrx"
(II) fglrx(0): [drm] drmOpen failed
(EE) fglrx(0): DRIScreenInit failed!
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)            *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *

:confused:

Janky 19-12-2004 00:19

ah non me lo chiedere a me:D

cmq se provo a caricare fglrx mi dice che non esiste


Tutti gli orari sono GMT +1. Ora sono le: 14:59.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Hardware Upgrade S.r.l.