Hardware Upgrade Forum

Hardware Upgrade Forum (https://www.hwupgrade.it/forum/index.php)
-   Microsoft Windows 8.1 e 10 (https://www.hwupgrade.it/forum/forumdisplay.php?f=155)
-   -   [Thread ufficiale] Windows 10 "Stable" (no preview builds) (https://www.hwupgrade.it/forum/showthread.php?t=2726029)


LL1 01-09-2021 18:07

Quote:

Originariamente inviato da ninja750 (Messaggio 47534484)
se è una feature non indispensabile su 10 perchè lo è diventata su 11?

secondo te quindi la "non indispensabilità" si misurerebbe col fatto che è disattivata di default?
Premesso che anche questa barriera è bypassabile (per quanto faticosamente stando sempre a quello che è dato sapere), c'erano altri motivi a monte che spiegavano la sua attivazione "su base volontaria" (vedi la sezione "Troubleshooting" di QUESTO ARTICOLO)...e cmq è dimostrato che una cosa che si fonda sulla volontarietà equivale a non renderla neppure disponibile.

Le cose ora cambiano un tantino...



Quote:

non basta lasciarlo installare con un warning sicurezza a video mentre aggiorni con un pulsante esticazzi da premere?
puoi sempre mandare una lettera a Seattle dove fai presente le tue osservazioni :sborone:

no_side_fx 01-09-2021 20:23

Quote:

Originariamente inviato da LL1 (Messaggio 47534570)
secondo te quindi la "non indispensabilità" si misurerebbe col fatto che è disattivata di default?

ni

se per esempio prendiamo il famigerato TPM questo di solito è sempre attivato di default sui portatili ma non sui pc desktop e la cosa ha senso perché per il mestiere che deve fare effettivamente su un pc desktop ha molta meno utilità salvo casi particolari ed infatti tutti i produttori hanno sempre seguito questa logica

ora invece è Microsoft che pretende che deve essere attivato su tutti a prescindere

come si suol dire tutto serve ma nulla è indispensabile

LL1 01-09-2021 21:04

Why Windows 11 has such strict hardware requirements, according to Microsoft :read:


Utile anche qui

ulukaii 02-09-2021 07:37

Mi par di capire che non ci si fiondi più ad aggiornare Win 10 come un tempo, tutti passati a 11?

In caso > KB5005101

PS: è opzionale, nel caso qualcuno abbia paura che gli faccia esplodere il PC può non installarlo.

tallines 02-09-2021 09:18

Quote:

Originariamente inviato da ulukaii (Messaggio 47535051)
Mi par di capire che non ci si fiondi più ad aggiornare Win 10 come un tempo, tutti passati a 11?

In caso > KB5005101

PS: è opzionale, nel caso qualcuno abbia paura che gli faccia esplodere il PC può non installarlo.

Mi che yeppala ha installato W11 :asd: :asd:


Eccolo :sofico: :sofico:


Fatal Frame 02-09-2021 09:57

Fiondatevi tutti su W11 :asd:

gabmamb 02-09-2021 10:05

scusate: al ritorno dalle ferie all'avvio del pc non si collegava ad internet; al riavvio a volte si a volte no. a volte senza riavviarlo bastava staccare e riattaccare il cavo di rete e ripartiva. poi per qualche giorno mi pare dopo l'aggiornamento è filato tutto liscio. oggi all'avvio di nuovo nessun collegamento : ho avviato la risoluzione dei problemi ed è risultato un errore sul DHCP, poi risolto.....
come posso indagare e risolvere?

LL1 02-09-2021 10:11

Quote:

Originariamente inviato da ulukaii (Messaggio 47535051)
Mi par di capire che non ci si fiondi più ad aggiornare Win 10 come un tempo, tutti passati a 11?

In caso > KB5005101

PS: è opzionale, nel caso qualcuno abbia paura che gli faccia esplodere il PC può non installarlo.

No no tranquillo e grazie anzi per la segnalazione, sono a lavoro ma appena torno a casa provvedo.
Se mi esplode qualcosa, di solito sono le palle per il loro uso "morigerato" :D , sul PC invece le cose scorrono serenamente :fagiano:

yeppala 02-09-2021 10:21

Quote:

Originariamente inviato da ulukaii (Messaggio 47535051)
Mi par di capire che non ci si fiondi più ad aggiornare Win 10 come un tempo, tutti passati a 11?

In caso > KB5005101

PS: è opzionale, nel caso qualcuno abbia paura che gli faccia esplodere il PC può non installarlo.

Mi fiondo su Windows Update...
:ops:
Build 19043.1202
This non-security update includes quality improvements. Key changes include: :eekk:
  • Addresses an issue that prevents users from tracking Distributed Component Object Model (DCOM) activation failures.
  • Addresses a threading issue that might cause the Windows Remote Management (WinRM) service to stop working when it is under a high load.
  • Addresses an issue that causes the Windows Management Instrumentation (WMI) provider host process to stop working. This occurs because of an unhandled access violation that occurs when using the Desired State Configuration (DSC).
  • Addresses an issue that causes file migration between Distributed File System (DFS) paths that are stored on different volumes to fail. This issue occurs when you implement the migration using PowerShell scripts that use the Move-Item command.
  • Addresses an issue that prevents you from writing to a WMI repository after a low memory condition occurs.
  • Addresses an issue that resets the brightness for standard dynamic range (SDR) content on high-dynamic range (HDR) monitors. This occurs after you restart the system or reconnect to the system remotely.
  • Addresses an issue that might cause an external monitor to display a black screen after Hibernation. This issue might occur when the external monitor connects to a docking station using a certain hardware interface.
  • Addresses a memory leak that occurs when you use nested classes within VBScript.
  • Addresses an issue that prevents you from typing any words in the username box during the out-of-box experience (OOBE) process. This issue occurs when you use the Chinese Input Method Editor (IME).
  • Addresses an issue that causes applications that use a shim to stop working. This issue occurs on devices that do not have edgegdi.dll installed. The error message is, "The code execution cannot proceed because edgegdi.dll was not found".
  • Addresses an issue that might prevent you from minimizing an application that uses unthemed windows.
  • Addresses an issue that might cause your device to stop working during a touch input gesture. This issue occurs if you bring more fingers into contact with the touchpad or screen during the middle of the gesture.
  • Addresses an issue with resizing images that might produce flickering and residual line artifacts.
  • Addresses an issue with copying and pasting a text box into Office 365 apps. The IME prevents you from inserting text into the text box.
  • Addresses an issue that prevents USB audio headsets from working on devices that support USB audio offload. This issue occurs if you installed third-party audio drivers on the devices.
  • Addresses an issue that causes Authentication Mechanism Assurance (AMA) to stop working. This issue occurs when you migrate to Windows Server 2016 (or newer versions of Windows) and when using AMA in conjunction with certificates from Windows Hello for Business.
  • Addresses an issue that prevents Code Integrity rules from working correctly when specifying Package Family Name rules in a Code Integrity policy. This issue occurs because of the incorrect handling of case-sensitive names.
  • Addresses an issue that prevents the ShellHWDetection service from starting on a Privileged Access Workstation (PAW) device and prevents you from managing BitLocker drive encryption.
  • Addresses an issue in Windows Defender Exploit Protection that prevents some Microsoft Office applications from working on machines that have certain processors.
  • Addresses an issue that causes the IME toolbar to appear even when the Remote App is closed.
  • Addresses an issue that might occur when you configure the policy, "Delete user profiles older than a specified number of days on system restart". If a user has been signed in for longer than the time specified in the policy, the device might unexpectedly delete profiles at startup.
  • Addresses an issue with the Microsoft OneDrive sync setting "Always keep on this device". The setting is unexpectedly reset to "Known folders only" after you install a Windows update.
  • Addresses an issue that provides the wrong Furigana result when a user cancels the Japanese reconversion.
  • Addresses a rare condition that prevents Bluetooth headsets from connecting using the Advanced Audio Distribution Profile (A2DP) for music playback and causes the headsets to only work for voice calls.
  • Adds the "Target Product Version" policy. With this, administrators can specify the Windows product they want devices to migrate to or remain on (for example, Windows 10 or Windows 11).
  • Increases the default number of entries in the local security authority (LSA) Lookup Cache to improve lookup performance in high lookup volume scenarios.
  • Addresses an issue that might create duplicate built-in local accounts, such as administrator or guest account, during an in-place upgrade. This issue occurs if you previously renamed those accounts. As a result, the Local Users and Groups MMC snap-in (lusrmgr.msc) appears blank with no accounts after the upgrade. This update removes the duplicate accounts from the local Security Account Manager (SAM) database on the affected machines. If the system detected and removed duplicate accounts, it logs a Directory-Services-SAM event, with ID 16986, in the System event log.
  • Addresses stop error 0x1E in srv2!Smb2CheckAndInvalidateCCFFile.
  • Addresses an issue that might cause transfer validations to fail with the error, "HRESULT E_FAIL has been returned from a call to a COM component". This issue occurs when you use Windows Server 2008, Windows Server 2008 R2, or Windows Server 2012 as sources.
  • Addresses an issue that might cause a system to stop working after a deduplication filter detects damage in a reparse point. This issue occurs because of deduplication driver changes introduced in a previous update.
  • Addresses an issue with using the robocopy command with the backup option (/B) to fix data loss. This issue occurs when the source location contains tiered Azure File Sync files or tiered Cloud Files.
  • Stops running queries against OneSettings APIs from the obsolete Storage Health feature.
  • Enables over 1400 new mobile device management (MDM) policies. With them, you can configure policies that Group Policies also support. These new MDM policies include administrative template (ADMX) policies, such as App Compat, Event Forwarding, Servicing, and Task Scheduler. Starting in September 2021, you can use the Microsoft Endpoint Manager (MEM) Settings Catalog to configure these new MDM policies.

guant4namo 02-09-2021 10:50

Quote:

Originariamente inviato da yeppala (Messaggio 47535276)
Mi fiondo su Windows Update...
:ops:

Stai perdendo colpi caro yeppala :D

LL1 02-09-2021 10:55

Non ci sono più gli yeppala di una volta...

yeppala 02-09-2021 11:11

Ieri sera per sicurezza ho controllato se era uscito qualcosa, anche se pensavo fosse improbabile la cosa, ma non c'era ancora niente :nonsifa:

no_side_fx 02-09-2021 11:15

Quote:

Originariamente inviato da gabmamb (Messaggio 47535240)
scusate: al ritorno dalle ferie all'avvio del pc non si collegava ad internet; al riavvio a volte si a volte no. a volte senza riavviarlo bastava staccare e riattaccare il cavo di rete e ripartiva. poi per qualche giorno mi pare dopo l'aggiornamento è filato tutto liscio. oggi all'avvio di nuovo nessun collegamento : ho avviato la risoluzione dei problemi ed è risultato un errore sul DHCP, poi risolto.....
come posso indagare e risolvere?

come prima cosa ti direi di disinstallare/reinstallare la scheda di rete, e fare un reset con i comandi:
netsh int ip reset
netsh winsock reset
dopodiché una controllata anche al router/network di casa

gabmamb 02-09-2021 11:42

Quote:

Originariamente inviato da no_side_fx (Messaggio 47535393)
come prima cosa ti direi di disinstallare/reinstallare la scheda di rete, e fare un reset con i comandi:
netsh int ip reset
netsh winsock reset
dopodiché una controllata anche al router/network di casa

grazie.
per il router cosa suggerisci?

edit: ho scoperto che da ip fisso è cambiato in automatico! ho problemi a tenere un ip fisso, perchè?

no_side_fx 02-09-2021 11:53

prova a fare le cose scritte sopra e poi vedi se succede ancora

sul router elimina eventuali ip reserved e regole di forwarding e poi controlla sulle impostazioni del server dhcp che sia attivo e abbia un range ip non troppo ristretto

gabmamb 02-09-2021 12:30

Quote:

Originariamente inviato da no_side_fx (Messaggio 47535454)
prova a fare le cose scritte sopra e poi vedi se succede ancora

sul router elimina eventuali ip reserved e regole di forwarding e poi controlla sulle impostazioni del server dhcp che sia attivo e abbia un range ip non troppo ristretto

fatto per quanto riguarda il pc non mi consente di fissare l'ip: "non è possibile salvare le impostazioni IP. Controlla una o più impostazioni e riprova"
cosa diamine devo controllare?
gateway e DNS hanno stesso indirizzo del router, giusto?

sul router non ho compreso cosa verificare.
grazie

edit: ho dovuto impostarlo nel dhcp del router. così l'ha preso

Fatal Frame 02-09-2021 12:30

Quote:

Originariamente inviato da yeppala (Messaggio 47535276)
Mi fiondo su Windows Update...
:ops:
Build 19043.1202

L'aggiornamento che stavano tutti aspettando :asd:

no_side_fx 02-09-2021 13:34

Quote:

Originariamente inviato da gabmamb (Messaggio 47535525)
edit: ho dovuto impostarlo nel dhcp del router. così l'ha preso

in pratica gli hai messo l'ip reseved sul mac address della scheda del tuo pc

per il resto il gateway è l'ip del router mentre i DNS lascia in automatico

probabilmente quell'errore che ti da potrebbe essere dovuto al fatto che una scheda di rete con lo stesso indirizzo IP si trova nel Registro di sistema ma è nascosta in Gestione dispositivi, prova a verificare questa cosa

gabmamb 02-09-2021 13:45

Quote:

Originariamente inviato da no_side_fx (Messaggio 47535637)
in pratica gli hai messo l'ip reseved sul mac address della scheda del tuo pc

per il resto il gateway è l'ip del router mentre i DNS lascia in automatico

probabilmente quell'errore che ti da potrebbe essere dovuto al fatto che una scheda di rete con lo stesso indirizzo IP si trova nel Registro di sistema ma è nascosta in Gestione dispositivi, prova a verificare questa cosa

Mmmm....non ho capito molto bene, se mi dici come verifico.
Grazie mille.
P.S.: la connessione si chiama ethernet 3 e poi c'è una virtual ethernet sempre 3

no_side_fx 02-09-2021 13:50

segui questo
https://howtodoninja.com/how-to/view...indows-10-8-7/
e controlla nelle schede di rete


Tutti gli orari sono GMT +1. Ora sono le: 05:31.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Hardware Upgrade S.r.l.