Sirbako
24-08-2005, 11:10
Ho trovato un sacco di cose, il problema è che ancora non c riesco.
qua (http://sane-project.org/cgi-bin/driver.pl?manu=&model=3300c&bus=usb) mi dice che il mio scanner è supportato. allora ho installato questo (http://sourceforge.net/projects/hp3300backend) con l'ultima versione che ho trovato. ho provato a fare il test e mi dice nessun tools, allora ho installato anche la patch ma lo scanner non lo vede.
poi ho provato anche da apt (apt-get install sane) e poi ho dato un sane-find-scanner ma niente
bako@PC-FISSO-DEBIAN:/mnt/usb$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
# No USB scanners found. If you expected something different, make sure that
# you have loaded a driver for your USB host controller and have installed a
# kernel scanner module.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
ho provato anche il MAN (http://www.sane-project.org/man/)
qualcuno sa darmi una mano?
qua (http://sane-project.org/cgi-bin/driver.pl?manu=&model=3300c&bus=usb) mi dice che il mio scanner è supportato. allora ho installato questo (http://sourceforge.net/projects/hp3300backend) con l'ultima versione che ho trovato. ho provato a fare il test e mi dice nessun tools, allora ho installato anche la patch ma lo scanner non lo vede.
poi ho provato anche da apt (apt-get install sane) e poi ho dato un sane-find-scanner ma niente
bako@PC-FISSO-DEBIAN:/mnt/usb$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
# No USB scanners found. If you expected something different, make sure that
# you have loaded a driver for your USB host controller and have installed a
# kernel scanner module.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
ho provato anche il MAN (http://www.sane-project.org/man/)
qualcuno sa darmi una mano?