kirk96
25-07-2005, 12:14
Ciao a tutti,
qualcuno mi saprebbe dare indicazioni sul perchè la masterizzazione non è andata a buon fine? Qui sotto trovate il log.
Premesse:
-Utilizzato Nero Express --> Copia Intero Disco (quind con creazione dell'immagine e poi, dopo aver inserito il DVD da scrivere, copia)
- il DVD da scrivere è un -RW della Sony (scritt max 1x), cancellato in modalità rapida.
_______________________________________________________________
24.7.2005
===== Disc-Copy over image - 1st step : Copy to image ...
19.20.44 #1 Text 0 File Reader.cpp, Line 127
Reader running
19.20.44 #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
19.20.44 #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 1899984 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
19.20.45 #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 1899984 = 1899984, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
19.20.45 #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
19.20.45 #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1899983 (422:13.08, 3710MB)
19.20.45 #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
19.20.45 #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
19.20.45 #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19.20.45 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1899984 (1899984) = #1899984/422:13.9
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1899984 blocks [Image Recorder]
--------------------------------------------------------------
19.20.45 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3891167232, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1899984 | lead-out | 1 | 0x41 | 0x00
19.20.45 #12 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
19.20.45 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
19.39.08 #14 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 1899984 (1CFDD0h), lenght 0 blocks
19.39.08 #15 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19.39.09 #16 Phase 121 File dlgbrnst.cpp, Line 1832
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
19.39.29 #1 Text 0 File Reader.cpp, Line 127
Reader running
19.39.29 #2 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD+-RW ND-6500A running
19.39.29 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3891167232
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=422:13.09 ( 1899984) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Alberto\Documenti\TempImage.nrg>
19.39.29 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
19.52.01 #5 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1899983 (422:13.08, 3710MB)
19.52.01 #6 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
19.52.01 #7 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD+R
19.52.01 #8 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD+R DL.)
19.52.01 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1899984 (1899984) = #1899984/422:13.9
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1899984 blocks [_NEC DVD+-RW ND-6500A]
--------------------------------------------------------------
19.53.13 #10 Text 0 File Burncd.cpp, Line 3747
Can only write at 1x (1.385 KB/s) instead of 4x (5.540 KB/s) to current disc.
19.53.13 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3891167232, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1899984 | lead-out | 1 | 0x41 | 0x00
19.53.13 #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 1x (1.385 KB/s)
19.53.14 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
19.53.14 #14 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode
19.53.14 #15 Text 0 File Mmc.cpp, Line 21235
Set BUFE: JustLink -> ON
19.53.14 #16 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes
19.53.14 #17 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
19.53.18 #18 Text 0 File Cdrdrv.cpp, Line 1287
19:53:18.578 - _NEC DVD+-RW ND-6500A\H1 T0 : Queue again later
19.53.48 #19 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03670000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
19.53.48 #20 CDR -1135 File Writer.cpp, Line 311
Write error
19.53.48 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19.53.49 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
19.53.49 #23 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was -1
19.53.49 #24 Phase 181 File dlgbrnst.cpp, Line 1832
Writing lead-out...
19.53.49 #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 1x (1.385 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 23.07.32
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13.06.00
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 02/08/2004 3.03.00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 23.59.44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
________________________________________________________________
qualcuno mi saprebbe dare indicazioni sul perchè la masterizzazione non è andata a buon fine? Qui sotto trovate il log.
Premesse:
-Utilizzato Nero Express --> Copia Intero Disco (quind con creazione dell'immagine e poi, dopo aver inserito il DVD da scrivere, copia)
- il DVD da scrivere è un -RW della Sony (scritt max 1x), cancellato in modalità rapida.
_______________________________________________________________
24.7.2005
===== Disc-Copy over image - 1st step : Copy to image ...
19.20.44 #1 Text 0 File Reader.cpp, Line 127
Reader running
19.20.44 #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
19.20.44 #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 1899984 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
19.20.45 #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 1899984 = 1899984, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
19.20.45 #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
19.20.45 #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1899983 (422:13.08, 3710MB)
19.20.45 #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
19.20.45 #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
19.20.45 #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19.20.45 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1899984 (1899984) = #1899984/422:13.9
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1899984 blocks [Image Recorder]
--------------------------------------------------------------
19.20.45 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3891167232, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1899984 | lead-out | 1 | 0x41 | 0x00
19.20.45 #12 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
19.20.45 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
19.39.08 #14 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 1899984 (1CFDD0h), lenght 0 blocks
19.39.08 #15 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19.39.09 #16 Phase 121 File dlgbrnst.cpp, Line 1832
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
19.39.29 #1 Text 0 File Reader.cpp, Line 127
Reader running
19.39.29 #2 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD+-RW ND-6500A running
19.39.29 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3891167232
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=422:13.09 ( 1899984) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Alberto\Documenti\TempImage.nrg>
19.39.29 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
19.52.01 #5 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1899983 (422:13.08, 3710MB)
19.52.01 #6 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
19.52.01 #7 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD+R
19.52.01 #8 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD+R DL.)
19.52.01 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1899984 (1899984) = #1899984/422:13.9
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1899984 blocks [_NEC DVD+-RW ND-6500A]
--------------------------------------------------------------
19.53.13 #10 Text 0 File Burncd.cpp, Line 3747
Can only write at 1x (1.385 KB/s) instead of 4x (5.540 KB/s) to current disc.
19.53.13 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3891167232, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1899984 | lead-out | 1 | 0x41 | 0x00
19.53.13 #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 1x (1.385 KB/s)
19.53.14 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
19.53.14 #14 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode
19.53.14 #15 Text 0 File Mmc.cpp, Line 21235
Set BUFE: JustLink -> ON
19.53.14 #16 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes
19.53.14 #17 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
19.53.18 #18 Text 0 File Cdrdrv.cpp, Line 1287
19:53:18.578 - _NEC DVD+-RW ND-6500A\H1 T0 : Queue again later
19.53.48 #19 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03670000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
19.53.48 #20 CDR -1135 File Writer.cpp, Line 311
Write error
19.53.48 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19.53.49 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
19.53.49 #23 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was -1
19.53.49 #24 Phase 181 File dlgbrnst.cpp, Line 1832
Writing lead-out...
19.53.49 #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 1x (1.385 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 23.07.32
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13.06.00
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 02/08/2004 3.03.00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 23.59.44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
________________________________________________________________