Fran123
22-04-2005, 12:54
Vendo monitor 17" della LG modello 795FT Plus Flatron € 90.00
-Preferenza consegna a mano.
-Scambio, proponete valuteṛ
-Vendita anche fuori dal forum
http://www.planetomni.com/images/MONIT_LGEL_795ftplus.jpg
Qui sotto Specifiche
* Auto-synchronous support from 640 x 480 up to 1600 x 1200 @ 75 Hz NI
* Flicker-free up to 1280 x 1024 @ 90 Hz
* Digital (microprocessor-based) On-Screen adjustments, soft sensor controls
* Internal screen coatings further reduce reflection
* The flat screen surface eliminates fatiguing glare
* Innovative design offers more accurate color, better sharpness
* No annoying horizontal tension wires, as seen on other flat monitors
Specifications
CDT Technology Flatron Flat Tube, Dynamic Focus
CDT Size/Type 17"(16.01" Viewable)
Display Size 12.8"x 9.6"
Display Colors Unlimited
CDT Transmission 40%
CDT Pitch 0.24mm stripe
CDT Coating Wide-ARAS, internal anit-glare
Phosphor Persistence Medium Short
Maximum Resolution 1600 x 1200 x@ 75 Hz NI
Maximum Flicker-Free Resolutions 1280 x 1024 @ 90 Hz NI
1024 x 768 @120 Hz
800 x 600 @ 150 Hz NI
640 x 480 @160 Hz NI
Apple Compatibility 832 x 624 @ 145 Hz NI
1152 x 870 @ 106 Hz NI
Display Capability Auto-sync within scanning frequencies
Horizontal Scanning Frequencies 30-96 KHz
Vertical Scanning Frequencies 50-160 Hz
Pixel Frequencies (Clock) 203 MHz
Input Signal RGB analog, 0.7 Vp-p/75 ohms
Sync Signaling Separate
Input Connector 15-pin D-sub
Monitor Control Type Digital microprocessor controls with on-screen display, soft sensor control
Memory Modes 12 factory preset, 26 user-settable
Plug and Play DDC 2B, USB (hub w/4 ports)
Digital On-Screen Controls Brightness, contrast, color controls, H/V position, H/V size, pincushion, pin balance, pin S and pin W, purity, H/V convergence, trapezoid, parallelogram, H/V moire control, manual degauss, tilt control, video level, DDC mode, OSD position, mode recall, self diagnostics, display language select
Language Selection English, German, French, Italian, Spanish, Portugese, Swedish, Finnish
Front Panel Controls Power, OSD, on/off, up, down, left, right, set
Power Requirements AC 100-120, 200-240V, 50-60 Hz
DPMS Power Consumption (W/O USB) Maximum: 130 Watts
Stand-by: 15 Watts
Off: 3 Watts
Universal Serial Bus (USB) Hub (1 upstream,4 downstream)
Supplied Cables Power Cable, attach 15 D-sub cable (VGA)
Tilt/Swivel Base Detachable, forward 5°, backward 13.5°
Dimensions with Base 16.33" x 17.2" x 17.3" (W x D x H)
Weight: Set/Packed 46.2 lbs./53.9 lbs
Mean Time Between Failure 50,000 hours
Safety/regulatory UL, FCC-B, CSA, TUV-GS CB, DHHS, NEMKO, SEMKO, DEMKO, FIMKO, GOST, CE, FTZ-B, TCO'99, HWC, ROV, ISO9241-3, ISO8241-8 NUTEK, VCCI2
-Preferenza consegna a mano.
-Scambio, proponete valuteṛ
-Vendita anche fuori dal forum
http://www.planetomni.com/images/MONIT_LGEL_795ftplus.jpg
Qui sotto Specifiche
* Auto-synchronous support from 640 x 480 up to 1600 x 1200 @ 75 Hz NI
* Flicker-free up to 1280 x 1024 @ 90 Hz
* Digital (microprocessor-based) On-Screen adjustments, soft sensor controls
* Internal screen coatings further reduce reflection
* The flat screen surface eliminates fatiguing glare
* Innovative design offers more accurate color, better sharpness
* No annoying horizontal tension wires, as seen on other flat monitors
Specifications
CDT Technology Flatron Flat Tube, Dynamic Focus
CDT Size/Type 17"(16.01" Viewable)
Display Size 12.8"x 9.6"
Display Colors Unlimited
CDT Transmission 40%
CDT Pitch 0.24mm stripe
CDT Coating Wide-ARAS, internal anit-glare
Phosphor Persistence Medium Short
Maximum Resolution 1600 x 1200 x@ 75 Hz NI
Maximum Flicker-Free Resolutions 1280 x 1024 @ 90 Hz NI
1024 x 768 @120 Hz
800 x 600 @ 150 Hz NI
640 x 480 @160 Hz NI
Apple Compatibility 832 x 624 @ 145 Hz NI
1152 x 870 @ 106 Hz NI
Display Capability Auto-sync within scanning frequencies
Horizontal Scanning Frequencies 30-96 KHz
Vertical Scanning Frequencies 50-160 Hz
Pixel Frequencies (Clock) 203 MHz
Input Signal RGB analog, 0.7 Vp-p/75 ohms
Sync Signaling Separate
Input Connector 15-pin D-sub
Monitor Control Type Digital microprocessor controls with on-screen display, soft sensor control
Memory Modes 12 factory preset, 26 user-settable
Plug and Play DDC 2B, USB (hub w/4 ports)
Digital On-Screen Controls Brightness, contrast, color controls, H/V position, H/V size, pincushion, pin balance, pin S and pin W, purity, H/V convergence, trapezoid, parallelogram, H/V moire control, manual degauss, tilt control, video level, DDC mode, OSD position, mode recall, self diagnostics, display language select
Language Selection English, German, French, Italian, Spanish, Portugese, Swedish, Finnish
Front Panel Controls Power, OSD, on/off, up, down, left, right, set
Power Requirements AC 100-120, 200-240V, 50-60 Hz
DPMS Power Consumption (W/O USB) Maximum: 130 Watts
Stand-by: 15 Watts
Off: 3 Watts
Universal Serial Bus (USB) Hub (1 upstream,4 downstream)
Supplied Cables Power Cable, attach 15 D-sub cable (VGA)
Tilt/Swivel Base Detachable, forward 5°, backward 13.5°
Dimensions with Base 16.33" x 17.2" x 17.3" (W x D x H)
Weight: Set/Packed 46.2 lbs./53.9 lbs
Mean Time Between Failure 50,000 hours
Safety/regulatory UL, FCC-B, CSA, TUV-GS CB, DHHS, NEMKO, SEMKO, DEMKO, FIMKO, GOST, CE, FTZ-B, TCO'99, HWC, ROV, ISO9241-3, ISO8241-8 NUTEK, VCCI2