evil.angel
24-03-2005, 17:45
Ciao a tutti!
Ho un Siemes M55, e sto cercando di connettermi via GPRS con una Knoppix 3.7!
Ho scaricato il programma GPRS Easy connect!solo che ho qualche piccolo problemino...:cry:
Praticamente non mi si connette nemmeno...:confused: :confused: :confused:
Sono sicuro che la porta che ho impostata sia ok!!!
Qualcuno sa perchè nn riesco a connettermi??!!!
Grazie anticipatamente a tutti!!!!!!
Queste sono le mie impostazioni da"EasyConn.config":
Siemens M55# phone type
USB-COM 01 (/dev/ttyUSB0)# selected port
1# connect window to panel?
# start this browser
0# enable starting of a browser
# enable automatic connection
italiano# language
1# main window to panel?
TIM (new) (Italy)# selected provider
<># username
<># password
# reconnect after the disconnect in xx sec.
200# time interval. of the watching buliding connection
2005/3/16 19;41# date of starting of data's save
1# enable dynamic DNSs
# own CID number
# own DNS1
# own DNS2
# disable warning beep
# reconnect in the backround
3# number of enabled reconnections
# disable CGQ commands
# own calling number
# date of erase of monthly limit's data
# monthly limit
# weekly limit
# month of last erase
# Do not require the peer to authenticate itself
# debug mode on
# enable BSD compression
57600# connection speed
# disable read/write data during connection
# disabe the sending of info of new tested phone
ibox.tim.it# own APN
# compact mode
1# newly set data
179# APN ID
il messaggio che mi mostra da "tail -f /var/log/messages":
Hideki@debby:~$ su
Password:
root@debby:/home/Hideki# tail -f /var/log/messages
Mar 24 15:39:48 debby kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar 24 15:39:48 debby kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Mar 24 15:39:48 debby kernel: cs: IO port probe 0x0820-0x08ff: clean.
Mar 24 15:39:48 debby kernel: cs: IO port probe 0x0800-0x080f: clean.
Mar 24 15:39:48 debby kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x1e0-0x1e7 0x378-0x37f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
Mar 24 15:39:48 debby kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Mar 24 15:39:49 debby kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
Mar 24 15:39:49 debby kernel: parport0: irq 7 detected
Mar 24 15:39:49 debby kernel: lp0: using parport0 (polling).
Mar 24 15:39:49 debby kernel: lp0: console ready
####Qui ho inserito il cavetto USB nella porta!!!
Mar 24 15:45:16 debby kernel: hub.c: new USB device 00:0c.0-1, assigned address 2
Mar 24 15:45:16 debby kernel: usbserial.c: PL-2303 converter detected
Mar 24 15:45:16 debby kernel: usbserial.c: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
Mar 24 15:45:19 debby usb.agent[1698]: pl2303: already loaded
Mar 24 15:50:31 debby kernel: CSLIP: code copyright 1989 Regents of the University of California
Mar 24 15:50:31 debby kernel: PPP generic driver version 2.4.2
Mar 24 15:50:31 debby pppd[2641]: pppd 2.4.2 started by Hideki, uid 1000
Mar 24 15:50:32 debby chat[2670]: send (AT^M)
Mar 24 15:50:32 debby chat[2670]: timeout set to 240 seconds
Mar 24 15:50:32 debby chat[2670]: expect (OK)
Mar 24 15:50:33 debby chat[2670]: AT^M^M
Mar 24 15:50:33 debby chat[2670]: OK
Mar 24 15:50:33 debby chat[2670]: -- got it
Mar 24 15:50:33 debby chat[2670]: send (AT^SGAUTH=1^M)
Mar 24 15:50:33 debby chat[2670]: expect (OK)
Mar 24 15:50:33 debby chat[2670]: ^M
Mar 24 15:50:33 debby chat[2670]: AT^SGAUTH=1^M^M
Mar 24 15:50:33 debby chat[2670]: ERROR^M
Mar 24 15:50:43 debby pppd[2641]: Hangup (SIGHUP)
Mar 24 15:50:44 debby pppd[2641]: Exit.
C'è qualcuno che anche solo suggerirmi qualche cosa???!!!
Ci sto sclerando sopra!!!:muro: :muro: :muro:
byessssssss & grazie!
Ho un Siemes M55, e sto cercando di connettermi via GPRS con una Knoppix 3.7!
Ho scaricato il programma GPRS Easy connect!solo che ho qualche piccolo problemino...:cry:
Praticamente non mi si connette nemmeno...:confused: :confused: :confused:
Sono sicuro che la porta che ho impostata sia ok!!!
Qualcuno sa perchè nn riesco a connettermi??!!!
Grazie anticipatamente a tutti!!!!!!
Queste sono le mie impostazioni da"EasyConn.config":
Siemens M55# phone type
USB-COM 01 (/dev/ttyUSB0)# selected port
1# connect window to panel?
# start this browser
0# enable starting of a browser
# enable automatic connection
italiano# language
1# main window to panel?
TIM (new) (Italy)# selected provider
<># username
<># password
# reconnect after the disconnect in xx sec.
200# time interval. of the watching buliding connection
2005/3/16 19;41# date of starting of data's save
1# enable dynamic DNSs
# own CID number
# own DNS1
# own DNS2
# disable warning beep
# reconnect in the backround
3# number of enabled reconnections
# disable CGQ commands
# own calling number
# date of erase of monthly limit's data
# monthly limit
# weekly limit
# month of last erase
# Do not require the peer to authenticate itself
# debug mode on
# enable BSD compression
57600# connection speed
# disable read/write data during connection
# disabe the sending of info of new tested phone
ibox.tim.it# own APN
# compact mode
1# newly set data
179# APN ID
il messaggio che mi mostra da "tail -f /var/log/messages":
Hideki@debby:~$ su
Password:
root@debby:/home/Hideki# tail -f /var/log/messages
Mar 24 15:39:48 debby kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar 24 15:39:48 debby kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Mar 24 15:39:48 debby kernel: cs: IO port probe 0x0820-0x08ff: clean.
Mar 24 15:39:48 debby kernel: cs: IO port probe 0x0800-0x080f: clean.
Mar 24 15:39:48 debby kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x1e0-0x1e7 0x378-0x37f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
Mar 24 15:39:48 debby kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Mar 24 15:39:49 debby kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
Mar 24 15:39:49 debby kernel: parport0: irq 7 detected
Mar 24 15:39:49 debby kernel: lp0: using parport0 (polling).
Mar 24 15:39:49 debby kernel: lp0: console ready
####Qui ho inserito il cavetto USB nella porta!!!
Mar 24 15:45:16 debby kernel: hub.c: new USB device 00:0c.0-1, assigned address 2
Mar 24 15:45:16 debby kernel: usbserial.c: PL-2303 converter detected
Mar 24 15:45:16 debby kernel: usbserial.c: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
Mar 24 15:45:19 debby usb.agent[1698]: pl2303: already loaded
Mar 24 15:50:31 debby kernel: CSLIP: code copyright 1989 Regents of the University of California
Mar 24 15:50:31 debby kernel: PPP generic driver version 2.4.2
Mar 24 15:50:31 debby pppd[2641]: pppd 2.4.2 started by Hideki, uid 1000
Mar 24 15:50:32 debby chat[2670]: send (AT^M)
Mar 24 15:50:32 debby chat[2670]: timeout set to 240 seconds
Mar 24 15:50:32 debby chat[2670]: expect (OK)
Mar 24 15:50:33 debby chat[2670]: AT^M^M
Mar 24 15:50:33 debby chat[2670]: OK
Mar 24 15:50:33 debby chat[2670]: -- got it
Mar 24 15:50:33 debby chat[2670]: send (AT^SGAUTH=1^M)
Mar 24 15:50:33 debby chat[2670]: expect (OK)
Mar 24 15:50:33 debby chat[2670]: ^M
Mar 24 15:50:33 debby chat[2670]: AT^SGAUTH=1^M^M
Mar 24 15:50:33 debby chat[2670]: ERROR^M
Mar 24 15:50:43 debby pppd[2641]: Hangup (SIGHUP)
Mar 24 15:50:44 debby pppd[2641]: Exit.
C'è qualcuno che anche solo suggerirmi qualche cosa???!!!
Ci sto sclerando sopra!!!:muro: :muro: :muro:
byessssssss & grazie!