PDA

View Full Version : Scelta router economicissimo...


lamalta
17-02-2005, 09:20
Ciao a tutti.
Volevo prendermi un router per creare una rete domestica da interfacciare poi all'HAG di Fastweb.
Ho trovato questi 2 router economicissimi, il primo costa 19+iva, il secondo 23 + iva (dal grossista)
Che ne dite?
Come caratteristiche come sono?
Grazie!

1) ROUTER WAN /HUB IRS/ ARS405 1 porta WAN +4 Porte 10/100Mb
SCHEDA TECNICA PRODOTTO:

* Multiple users share a single ISP account via ADSL or Cable Modem
* Mapping a single external IP from the ISP to multiple internal address saves hundreds of dollars on Internet bills
* Simple configuration using either a terminal program, or from anywhere in the LAN using Windows based setup, or Web browser
* Easy LAN installation with 10/100M Switched connections (automatically detected)
* Built-in DHCP service automatically assigns network address, and identifies Domain Name Server and Default Gateway for each LAN user
* Provides natural firewall and secure gateway for LAN users
* Supports DSL or Cable connection up to 2.5Mbps
* Supports PPPoE DSL connection
* Supports TCP/IP protocols
* Supports Network Address Translation (NAT)
* Dial-on-Demand & Auto- Disconnection (PPPoE DSL)
* Supports IP Multicast (IP/TV)
* Supports Windows 95/98/NT/2000, Mac OS, UNIX, etc.

Router (WAN):

* Broadband Connection
* High-speed DSL or Cable connectionDSL Connection Always-On, PPPoE, DANA
* WAN Interface Speed 10Mbps
* Netwrok Interface RJ45 (TP)
* Protocol Support TCP/IP
* DHCP (client) Support Yes
* PPPoE DSL Connection Dial-on-Demand and Auto-disconnect
* PPPoE DSL Diagnostics Yes
* IP Multicast Support Yes (forwarding)
* RIP Support Yes (enable/disable)
* Virtual Private Network (VPN) Yes (PPTP pass-through)

Router (LAN):

* Network Operating System
* Windows 95/98, Windows 2000/NT, Mac OS, UnixProtocol TCP/IP, NAT
* Built-in DHCP Server Yes (User-definable IP range and static IP table)
* Local Server (TCP/UDP Port) Mapping Yes (8 TCP ports and 4 UDP ports)
* Internet Visible Computer Yes (1)
* User-definable Static Routing Table Yes
* Internet Access Control (Packet Filtering) Yes
* Internet Connection Spying Yes

Fast Ethernet Switch:

* Ethernet Standards
* IEEE 802.3 10BASE-TIEEE 802.3u 100BASE-TX
* Number of Ports 4 Switched 10/100Mbps Auto-negotiation
* Access Method Ethernet CSMA/CD
* Switching Method Store and Forward
* MAC Address Table 1K
* Buffer Memory 256K Bytes (shared)
* Filter and Forwarding Rate Line-speed
* Internal Bandwidth 500Mbps

General:

* Dimensions
* 185 x 101 x 33 mmPower Supply 9V DC 1A
* Power Consumption 9 Watts Max.
* Operating Temperature 0 to 40 degree C
* Storage Temperature -20 to 65 degree C
* Humidity 5% to 95% (non-condensing)
* Certification FCC A, CE

2)ROUTER WAN /HUB Edimax BR-6104K 2 Porte WAN +4 Porte 10/100Mb

SCHEDA TECNICA PRODOTTO:




* Internet Access via Cavo o xDSL
* Accesso ai Server da Rete Pubblica
* Supporto UPNP, DHCP, Auto MDI/X
* Virtual Server e DMZ
* Prevenzione Attacchi Hacker (DoS)
* NAT / NAPT IP Sharing
* SPI Anti-DoS Firewall
* Virtual Server
* Virtual DMZ
* Supporto UPnP
* Supporto DDNS (DynDNS / TZO)
* Supporto Applicazioni Speciali (Port Triggers)
* VPN Pass Through (IPSec / PPTP / L2TP)
* Reperimento WAN IP da PPPoE / Static IP / PPTP / DHCP
* Server DHCP
* Bridge Mode tra WAN e LAN
* Web User Interface (Configurazione Remota)
* Stato di sistema (Connettivitą porte, DHCP MAC / IP Mapping)
* Security Log
* Upgrade Firmware

SPECIFICHE TECNICHE
CPU High Performance RISC CPU
Flash 1 MB NOR Flash
RAM 8 MB SDRAM
Throughput 40 Mbps
WAN Port 10/100M UTP Port x 1
LAN Ports 10/100M UTP Port x 4
Weight 270g
Power 12V DC, 0.5A Linear Power Adaptor
Dimension 30(H)*187(W)*100(D) mm
Temperature 10~40°C
Humidity 10~90% (Non-Condensing
Certification FCC Class B, CE Mark, C-Tick



INFORMAZIONI SUL PRODUTTORE:

Ragione sociale: EDIMAX
Sito Internet: http://www.edimax.com.tw/indexe.

sanxius
17-02-2005, 14:26
Allora, premetto che sono FW fibra... ti dico solo che se vuoi fare una LAN aziendale la caratteristica fondamentale che il tuo "futuro"router deve avere e' quella di avere il NAT, ovvero che maschera tutti gli indirizzi alla FW. perche' l'HAG della FW supporta al max 3 IP (nel caso di ADSL) e 5 IP (nel caso di Fibra) quindi...

poi deve avere l'ingresso WAN da Ethernet non da ADSL...ricordalo! e' fondamentale...io stesso ho dovuto cambiare un Vigor 2600Ge in un Belkin Pre-N router...

occhio che FW non e' l'ADSL nel senso classico.
SZ

lamalta
17-02-2005, 17:49
Grazie per la risposta, mi sembra che entrambi i prodotti da me citati abbiano queste caratteristiche...
che dici?

sanxius
17-02-2005, 21:05
io prenderei il secondo xche' oltre ad essere un router mi fornisce anche un po' di sicurezza in piu'... a meno che tu non abbia gia' qualche sistema Firewall da qualche parte :D

lamalta
18-02-2005, 10:01
Originariamente inviato da sanxius
io prenderei il secondo xche' oltre ad essere un router mi fornisce anche un po' di sicurezza in piu'... a meno che tu non abbia gia' qualche sistema Firewall da qualche parte :D

Ok grazie
ciao