PDA

View Full Version : Scheda madre e Hd compatibilità


nemoprincess81
28-01-2005, 16:13
Ciao a tutti, volevo chiedervi se su questa scheda madre:

Socket 370 Processor based Mainboard
VIA Chipset series

Advance 10B

Chipset VIA Apollo Pro 133A
North Bridge: VIA VT82C694X
South Bridge: VIA VT82C686B
Slots 5 PCI slots
1 ISA slots
1 AGP slot
1 AMR
CPU Support Socket 370 processors
Intel Pentium III FC-PGA processors at 500/533EB/550/600E/600EB/650/667/700/733/ 750/800/800EB/900MHz and 1GHz
Support Intel Celeron CPU at 300A/333/366/400/433/466/500/500A/533/533A/566/600/633/700/733/800/900 MHz 1.0/1.1GHz
On-board 1.5V,2.5V,and 3.3V regulators
System Memory Three 168-pin 3.3V PC133 DIMM sockets
Support up to 1.5GB SDRAM
Support 66/100/133MHz Synchronous DRAM and VCM SDRAM
Power Management ACPI V1.0 and APM compliant
Support S0,S!,S3,S5 ACPI power status
Suspend to RAM and Suspend to Disk Support
USB 4 USB ports
USB 1.1 specification compliant
Bus Speed 66/100/133MHz FSB
Overclock up to 155MHz
BIOS Licensed advanced AWARD BIOS
2Mbit Flash ROM
Support Plug and Play
Support ACPI and OS Directed Power Management
Storage system Two PCI Master IDE ports support up to 4 IDE devices
Support ATA 66/100
One floppy port support up to two 3.5" or 5.25" floppy drives(360K/720K/1.2M/1.44M/2.88M)
Support LS-120 floppy disk drive and ZIP drive
I/O Feature All I/O ports can be enabled/disabled by BIOS setup
1 Speaker+1 Line in+1 Mic
1 PS/2 keyboard prot
1 PS/2 mouse port
2 high speed Serial Ports(16550 fast UART compatible)
1Enhanced parallel Port (SPP, EPP, ECP)
IrDA port supports up to 115.2KB/sec transfer rate
Graphics AGP 4X Support
Universal AGP Slot
Transfer Rate up to 1GB/s
System Health Monitoring CPU temperature, system temerature, CPU fan speed and chassis fan speed, 5 system voltages
Onboard Audio AC'97 2.1 Compliant
16-bit Stereo Codec
Advanced Feature Supports wakeup on Lan/Modem
Trend ChipAway Virus on Guard
PC-cillin with killing function
QDI Innovative Technology RecoveryEasy,SpeedEasy,LogoEasy,
BIOS-ProtectEasy,ManageEasy
Board Size 305 x 210 mm (ATX)

e su quest' altra:


Motherboard Specifications
CPU Socket Socket A (200/266 MHz Support)
Chipset KT266A
Form Factor ATX
Multiplier Options 5.5x - 15x
Bus Speed Options 100 - 199 MHz in 1 MHz Increments
Voltages +0.1v or -0.1v from processor default
Memory Support 3 x 184-pin PC2100 DDR DRAM
Expansion Slots 6/0/1/0 (PCI/ISA/AGP/AMR)
AGP Support 4x AGP
USB Support 2x Standard USB ports
2x Add-on USB ports
Integrated Components AC'97 Audio
Bios Award Bios
Onboard IDE 2 x ATA100 EIDE



posso montare un hard disk maxtor da 120 gb o 160.


Per favore mi date una mano? GRazie. Ciao.

lanfste
28-01-2005, 16:31
Garda se ci sono nuovi bios disponibili nei siti dei produttori delle mobo. Di sicuro li troverai più info.

;)

nemoprincess81
28-01-2005, 16:36
quindi dovrei aggiornare il bios delle schede?

lanfste
28-01-2005, 16:38
Aggiornandole aumenti le compatibilità.

Sui siti dei produttori trovi tutte le liste di compatibilità degli ultimi bios !

;)

nemoprincess81
28-01-2005, 16:40
Per la scheda QdI sul bios c' è scritto solo questo:

A10B_46slcp.zip Advance 10B/E/F BIOS 4.6 for SpeedEasy,RecoveryEasy, LogoEasy and BootEasy.
BIOS modified
1.Add to Support CBLOGO3.0

aggiornato al 20/11/01

lanfste
28-01-2005, 16:41
Se è l'ultimo ti conviene aggiornare. Però non è sicura la compatibilita con dischi da 120 o 160 GB. Dovresti provare o chiedere al servizio tecnico.

;)

nemoprincess81
28-01-2005, 16:47
mentre per la Epox 8kha+ c' è questo:

2003-05-09
20030509
8khi3425.bin
Improved Atholn XP2600+ stability



e nient' altro

lanfste
28-01-2005, 16:48
Beh aggiornarli non fà male.


;)

nemoprincess81
28-01-2005, 16:49
Nessuno di voi ha questa scheda :

QDI Legend Advance 10/B o F
Chipset Apollo Pro 133A


e l' ha mai provata?

Grazie

SirioU77
14-02-2005, 10:58
ciao, io ho da poco la qdi 10b, acquistata x il mio muletto.

mi spiace non poterti aiutare, al momento ci sta montato un maxtor da 60gb

volevo pure io aggiornare il bios ma l'ultima versione mi sa che è la 4.6

tu che hd hai montato sulla qdi?

CRL
14-02-2005, 13:31
Per il 120GB nessun problema con entrambe, dato che entrambe supportano l'ata100.
Per il 160GB o superiori, questo può essere letto solo con winXP sp2 o win2000 sp4 (oppure col sp precedente e apposita patch) e necessita in alcuni casi dell'aggiornamento del bios di cui dicevano sopra.
Vedi se dice qualcosa sull'indirizzamento a 48bit negli aggiornamenti, è quello il supporto necessario per riconoscere dischi di queste dimensioni.

- CRL -