Andrea85-64
20-12-2004, 22:08
Cosa ne pensate dell'ENERMAX EG465AX-VE (G) (FMA) 1.3V Ring Core? Ha queste caratteristiche:
O/P DC
Voltage Ripple &
Noise Total
Reg. Output current rating
Min. / Max.
+3.3VV 50mVmV ±5% 0.3A / 35A
+5VV 50mVmV ±5% 0.3A / 35A
+12VV 120mVmV ±5% 1.5A / 33A
-5VV 50mVmV ±10% 0A / 1A
-12VV 120mVmV ±10% 0A / 1A
+5VsbVsb 50mVmV ±5% 0.1A / 2.2
+3.3V & +5V 200W
TOTAL O/P 460W
Hold up time: 17ms min. at 100~230VAC
Over Power Protection 105%~160% of max load
Over Voltage Protection +5V: 5.6V~6.9V +3.3V: 3.65V~4.5V +5Vsb: 5.6V~6.9V
Efficiency 68% min. at 230VAC / full load
Cooling Air convection by +12V DC fan
Operation Temperature 0ºC ~25ºC for full rating of load, decrease to 80% rating of load at 40ºC, decrease to zero Watts O/P at 70ºC
Storage Temperature 20ºC ~80ºC
Humidity Operating: to 85% relative humidity,non-condensing at 25ºC Storage: to 95% relative humidity , non-condensing at 50ºC
MTBF 100K hours at 25ºC, 70% full rated load
O/P DC
Voltage Ripple &
Noise Total
Reg. Output current rating
Min. / Max.
+3.3VV 50mVmV ±5% 0.3A / 35A
+5VV 50mVmV ±5% 0.3A / 35A
+12VV 120mVmV ±5% 1.5A / 33A
-5VV 50mVmV ±10% 0A / 1A
-12VV 120mVmV ±10% 0A / 1A
+5VsbVsb 50mVmV ±5% 0.1A / 2.2
+3.3V & +5V 200W
TOTAL O/P 460W
Hold up time: 17ms min. at 100~230VAC
Over Power Protection 105%~160% of max load
Over Voltage Protection +5V: 5.6V~6.9V +3.3V: 3.65V~4.5V +5Vsb: 5.6V~6.9V
Efficiency 68% min. at 230VAC / full load
Cooling Air convection by +12V DC fan
Operation Temperature 0ºC ~25ºC for full rating of load, decrease to 80% rating of load at 40ºC, decrease to zero Watts O/P at 70ºC
Storage Temperature 20ºC ~80ºC
Humidity Operating: to 85% relative humidity,non-condensing at 25ºC Storage: to 95% relative humidity , non-condensing at 50ºC
MTBF 100K hours at 25ºC, 70% full rated load