# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "speedo"
# Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "logiik"
Option "XkbLayout" "it"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/mouse"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 37.9
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-100
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "NVIDIA GeForce"
Driver "nv"
#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce"
Monitor "My Monitor"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
ecco il log
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.26 i686 [ELF]
Build Date: 28 September 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.26-1-386 (horms@tabatha) (gcc version 3.3.4 (Debian 1:3.3.4-3)) #1 Thu Jul 22 12:46:23 JST 2004
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Nov 20 14:51:49 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Monitor Generico"
(**) | |-->Device "Scheda video generica"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80010008, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3188 card 147b,1406 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b188 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 1095,3114 card 1095,6114 rev 02 class 01,04,00 hdr 00
(II) PCI: 00:0e:0: chip 10b7,1700 card 147b,1406 rev 12 class 02,00,00 hdr 00
(II) PCI: 00:0f:0: chip 1106,3149 card 147b,1406 rev 80 class 01,04,00 hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 147b,1406 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 147b,1406 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 147b,1406 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 147b,1406 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 147b,1406 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 147b,1406 rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 147b,1406 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 147b,1406 rev 60 class 04,01,00 hdr 00
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 10de,0042 card 0000,0000 rev a1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe2ffffff (0x3000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:24:0), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:24:1), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:24:2), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:24:3), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(1:0:0) nVidia Corporation unknown chipset (0x0042) rev 161, Mem @ 0xe0000000/24, 0xd8000000/27, 0xe1000000/24
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe4005000 - 0xe40050ff (0x100) MX[B]
[1] -1 0 0xe4000000 - 0xe4003fff (0x4000) MX[B]
[2] -1 0 0xe4004000 - 0xe40043ff (0x400) MX[B]
[3] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[4] -1 0 0xe1000000 - 0xe1ffffff (0x1000000) MX[B](B)
[5] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[6] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[7] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[8] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[9] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[10] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[11] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[12] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
[13] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[14] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B]
[15] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[B]
[16] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[B]
[17] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[B]
[18] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B]
[19] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[20] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B]
[21] -1 0 0x0000ac00 - 0x0000ac03 (0x4) IX[B]
[22] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[B]
[23] -1 0 0x0000a400 - 0x0000a403 (0x4) IX[B]
[24] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe4005000 - 0xe40050ff (0x100) MX[B]
[1] -1 0 0xe4000000 - 0xe4003fff (0x4000) MX[B]
[2] -1 0 0xe4004000 - 0xe40043ff (0x400) MX[B]
[3] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[4] -1 0 0xe1000000 - 0xe1ffffff (0x1000000) MX[B](B)
[5] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[6] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[7] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[8] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[9] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[10] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[11] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[12] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
[13] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[14] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B]
[15] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[B]
[16] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[B]
[17] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[B]
[18] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B]
[19] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[20] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B]
[21] -1 0 0x0000ac00 - 0x0000ac03 (0x4) IX[B]
[22] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[B]
[23] -1 0 0x0000a400 - 0x0000a403 (0x4) IX[B]
[24] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe4005000 - 0xe40050ff (0x100) MX[B]
[6] -1 0 0xe4000000 - 0xe4003fff (0x4000) MX[B]
[7] -1 0 0xe4004000 - 0xe40043ff (0x400) MX[B]
[8] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[9] -1 0 0xe1000000 - 0xe1ffffff (0x1000000) MX[B](B)
[10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[11] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[15] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[16] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[17] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[18] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[19] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
[20] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[21] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B]
[22] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[B]
[23] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[B]
[24] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[B]
[25] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B]
[26] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[27] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B]
[28] -1 0 0x0000ac00 - 0x0000ac03 (0x4) IX[B]
[29] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[B]
[30] -1 0 0x0000a400 - 0x0000a403 (0x4) IX[B]
[31] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[B]
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o": No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "vga"
(II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o
(II) Module vga: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 4.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset generic found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe4005000 - 0xe40050ff (0x100) MX[B]
[6] -1 0 0xe4000000 - 0xe4003fff (0x4000) MX[B]
[7] -1 0 0xe4004000 - 0xe40043ff (0x400) MX[B]
[8] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[9] -1 0 0xe1000000 - 0xe1ffffff (0x1000000) MX[B](B)
[10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[11] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[15] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[16] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[17] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[18] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[19] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
[20] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[21] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B]
[22] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[B]
[23] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[B]
[24] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[B]
[25] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B]
[26] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[27] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B]
[28] -1 0 0x0000ac00 - 0x0000ac03 (0x4) IX[B]
[29] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[B]
[30] -1 0 0x0000a400 - 0x0000a403 (0x4) IX[B]
[31] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe4005000 - 0xe40050ff (0x100) MX[B]
[6] -1 0 0xe4000000 - 0xe4003fff (0x4000) MX[B]
[7] -1 0 0xe4004000 - 0xe40043ff (0x400) MX[B]
[8] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[9] -1 0 0xe1000000 - 0xe1ffffff (0x1000000) MX[B](B)
[10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[11] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[18] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[19] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[20] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[21] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[22] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
[23] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[24] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B]
[25] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[B]
[26] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[B]
[27] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[B]
[28] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B]
[29] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[30] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B]
[31] -1 0 0x0000ac00 - 0x0000ac03 (0x4) IX[B]
[32] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[B]
[33] -1 0 0x0000a400 - 0x0000a403 (0x4) IX[B]
[34] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[B]
[35] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[36] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) VGA(0): initializing int10.
(WW) VGA(0): Bad V_BIOS checksum
(II) VGA(0): Primary V_BIOS segment is: 0xc000
(WW) System lacks support for changing MTRRs
(**) VGA(0): Depth 4, (--) framebuffer bpp 4
(==) VGA(0): RGB weight 666
(==) VGA(0): Default visual is StaticColor
(==) VGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) VGA(0): videoRam: 256 kBytes.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) VGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) VGA(0): Pixel clocks available:
(--) VGA(0): pixel clocks: 25.080 28.322 25.080 25.080
(II) VGA(0): Monitor Generico: Using hsync range of 28.00-48.00 kHz
(II) VGA(0): Monitor Generico: Using vrefresh range of 43.00-72.00 Hz
(II) VGA(0): Not using default mode "640x350" (vrefresh out of range)
(II) VGA(0): Not using default mode "320x175" (vrefresh out of range)
(II) VGA(0): Not using default mode "640x400" (vrefresh out of range)
(II) VGA(0): Not using default mode "320x200" (vrefresh out of range)
(II) VGA(0): Not using default mode "720x400" (vrefresh out of range)
(II) VGA(0): Not using default mode "360x200" (vrefresh out of range)
(II) VGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) VGA(0): Not using default mode "320x240" (vrefresh out of range)
(II) VGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) VGA(0): Not using default mode "320x240" (vrefresh out of range)
(II) VGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) VGA(0): Not using default mode "320x240" (hsync out of range)
(II) VGA(0): Not using default mode "800x600" (hsync out of range)
(II) VGA(0): Not using default mode "400x300" (hsync out of range)
(II) VGA(0): Not using default mode "800x600" (hsync out of range)
(II) VGA(0): Not using default mode "400x300" (vrefresh out of range)
(II) VGA(0): Not using default mode "800x600" (hsync out of range)
(II) VGA(0): Not using default mode "800x600" (hsync out of range)
(II) VGA(0): Not using default mode "400x300" (vrefresh out of range)
(II) VGA(0): Not using default mode "800x600" (hsync out of range)
(II) VGA(0): Not using default mode "400x300" (hsync out of range)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) VGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) VGA(0): Not using default mode "512x384" (hsync out of range)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) VGA(0): Not using default mode "512x384" (hsync out of range)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) VGA(0): Not using default mode "512x384" (hsync out of range)
(II) VGA(0): Not using default mode "1152x864" (insufficient memory for mode)
(II) VGA(0): Not using default mode "576x432" (vrefresh out of range)
(II) VGA(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) VGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) VGA(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) VGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) VGA(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) VGA(0): Not using default mode "640x512" (vrefresh out of range)
(II) VGA(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) VGA(0): Not using default mode "640x512" (vrefresh out of range)
(II) VGA(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) VGA(0): Not using default mode "640x512" (vrefresh out of range)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) VGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) VGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) VGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) VGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) VGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) VGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) VGA(0): Not using default mode "896x672" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) VGA(0): Not using default mode "896x672" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) VGA(0): Not using default mode "928x696" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) VGA(0): Not using default mode "928x696" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) VGA(0): Not using default mode "960x720" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) VGA(0): Not using default mode "960x720" (insufficient memory for mode)
(II) VGA(0): Not using default mode "832x624" (hsync out of range)
(II) VGA(0): Not using default mode "416x312" (hsync out of range)
(II) VGA(0): Not using default mode "1152x768" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) VGA(0): Not using default mode "700x525" (vrefresh out of range)
(II) VGA(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) VGA(0): Not using default mode "700x525" (vrefresh out of range)
(II) VGA(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) VGA(0): Not using default mode "800x512" (vrefresh out of range)
(II) VGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) VGA(0): Not using default mode "960x720" (insufficient memory for mode)
(II) VGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) VGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) VGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) VGA(0): Not using mode "576x384" (no clock available for mode)
(II) VGA(0): Not using mode "512x384" (no clock available for mode)
(--) VGA(0): Virtual size is 640x480 (pitch 640)
(**) VGA(0): *Default mode "640x480": 25.1 MHz, 31.4 kHz, 59.7 Hz
(II) VGA(0): Modeline "640x480" 25.08 640 656 752 800 480 490 492 525 -hsync -vsync
(**) VGA(0): Default mode "400x300": 25.1 MHz, 48.2 kHz, 72.4 Hz (D)
(II) VGA(0): Modeline "400x300" 25.08 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) VGA(0): Default mode "320x240": 12.5 MHz, 31.4 kHz, 59.8 Hz (D)
(II) VGA(0): Modeline "320x240" 12.54 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
(==) VGA(0): DPI set to (75, 75)
(II) Loading sub module "xf4bpp"
(II) LoadModule: "xf4bpp"
(II) Loading /usr/X11R6/lib/modules/libxf4bpp.a
(II) Module xf4bpp: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xf1bpp"
(II) LoadModule: "xf1bpp"
(II) Loading /usr/X11R6/lib/modules/libxf1bpp.a
(II) Module xf1bpp: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe1000000 - 0xe1ffffff (0x1000000) MS[B]
[1] 0 0 0xd8000000 - 0xdfffffff (0x8000000) MS[B]
[2] 0 0 0xe0000000 - 0xe0ffffff (0x1000000) MS[B]
[3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xe4005000 - 0xe40050ff (0x100) MX[B]
[9] -1 0 0xe4000000 - 0xe4003fff (0x4000) MX[B]
[10] -1 0 0xe4004000 - 0xe40043ff (0x400) MX[B]
[11] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[12] -1 0 0xe1000000 - 0xe1ffffff (0x1000000) MX[B](B)
[13] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[14] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[21] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[22] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[23] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[24] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[25] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
[26] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[27] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B]
[28] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[B]
[29] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[B]
[30] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[B]
[31] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B]
[32] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[33] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B]
[34] -1 0 0x0000ac00 - 0x0000ac03 (0x4) IX[B]
[35] -1 0 0x0000a800 - 0x0000a807 (0x8) IX[B]
[36] -1 0 0x0000a400 - 0x0000a403 (0x4) IX[B]
[37] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[B]
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(**) Option "dpms"
(**) VGA(0): DPMS enabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 5
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
Could not init font path element unix/:7100, removing from list!
GetModeLine - scrn: 0 clock: 25080
GetModeLine - hdsp: 640 hbeg: 656 hend: 752 httl: 800
vdsp: 480 vbeg: 490 vend: 492 vttl: 525 flags: 10
(II) Open APM successful
(**) VGA(0): DPMS enabled
(==) RandR enabled
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element unix/:7100, removing from list!
SetClientVersion: 0 8
grazie