Originariamente inviato da supermarchino
quindi che faccio? :confused:
Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "ATA:1,0,0" gracetime=2 fs=2048k -v -useinfo speed=4 -eject -overburn -ignsize -immed -data "/home/marco/Desktop/warty-release-install-i386.iso" ...
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
scsidev: 'ATA:1,0,0'
devname: 'ATA'
scsibus: 1 target: 0 lun: 0
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
cdrecord: Warning: using inofficial libscg transport code version (warly-Mandrakelinux-scsi-linux-sg '@(#)scsi-linux-sg.c 1.81 04/04/18 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01a28-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <
[email protected]>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
atapi: -1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TOSHIBA '
Identifikation : 'DVD-ROM SD-R2102'
Revision : '1015'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x000A
Profile: 0x0010
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Drive buf size : 1312768 = 1282 KB
FIFO size : 2097152 = 2048 KB
pregap1: -1
Track 01: data 522 MB
Total size: 600 MB (59:28.88) = 267666 sectors
Lout start: 600 MB (59:30/66) = 267666 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 0
Is not unrestricted
Is erasable
ATIP start of lead in: -11625 (97:27/00)
ATIP start of lead out: 336781 (74:52/31)
Disk type: Phase change
Manuf. index: 0
Manufacturer: Illegal Manufacturer code
Blocks total: 336781 Blocks current: 336781 Blocks remaining: 69115
Starting to write CD/DVD at speed 4.0 in real TAO mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
trackno=0
Performing OPC...
Starting new track at sector: 0
cdrecord: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 17 40 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.061s timeout 40s
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
cdrecord: Success. close track/session: scsi sendcmd: no error
write track data: error after 12189696 bytes
CDB: 5B 01 02 00 00 00 00 00 00 00
Writing time: 25.912s
status: 0x2 (CHECK CONDITION)
Average write speed 137.8x.
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00
Min drive buffer fill was 95%
Sense Key: 0x5 Illegal Request, Segment 0
Fixating...
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Fixating time: 0.001s
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 480s
cmd finished after 0.000s timeout 480s
cdrecord: Cannot fixate disk.
cdrecord: fifo had 224 puts and 193 gets.
cdrecord: fifo was 0 times empty and 108 times full, min fill was 87%.