PDA

View Full Version : AMSTRAD PPC-640

cicconf
09-10-2004, 08:08
Salve ragazzi.
Ho trovato questo vecchio portatile di mio padre.
Vorrei accenderlo, ma non so come si fa (mio padre non si ricorda :( )
Chi di voi sa usarlo?
cicconf
10-10-2004, 18:00
up
cicconf
12-10-2004, 20:45
up
Kewell
12-10-2004, 20:52
Spsoto in portatili. Forse avrai pių fortuna:)
Lor3nzo76
12-10-2004, 23:48
Possiedi un pezzo di storia straordinario....;)

Ho trovato questo, spero ti sia utile:

"Giorgio Verdiani in Carrara, Italia at 17:28:44 Monday July 28 97

Does the PPC640 need a special operative system to operate? I tried with a boot-disk made with Dos 6.22 and with Dos 3.3 But none of them works... Thank you

Amstrad answers: You definitely should be able to boot a PPC with any version of MS-DOS, PC-DOS or DR-DOS but the one very important fact to remember is that it's floppy drive can ONLY read 720K, not 1.44M disks. So if you are preparing a boot disk on another DOS based machine that has DOS 3.3 or 6.22 installed you MUST use the command FORMAT A: /S /F:720 to force it to be a 720K system format disk."

Ciao
Lore
cicconf
13-10-2004, 17:26
Originariamente inviato da Kewell
Spsoto in portatili. Forse avrai pių fortuna:)
grazie
cicconf
13-10-2004, 17:28
Originariamente inviato da Lor3nzo76
Possiedi un pezzo di storia straordinario....;)

Ho trovato questo, spero ti sia utile:

"Giorgio Verdiani in Carrara, Italia at 17:28:44 Monday July 28 97

Does the PPC640 need a special operative system to operate? I tried with a boot-disk made with Dos 6.22 and with Dos 3.3 But none of them works... Thank you

Amstrad answers: You definitely should be able to boot a PPC with any version of MS-DOS, PC-DOS or DR-DOS but the one very important fact to remember is that it's floppy drive can ONLY read 720K, not 1.44M disks. So if you are preparing a boot disk on another DOS based machine that has DOS 3.3 or 6.22 installed you MUST use the command FORMAT A: /S /F:720 to force it to be a 720K system format disk."

Ciao
Lore
Grazie lore x la risposta.
Il problema pero č che non trovo il pulsante di accenzione, una volta messe le batterie, o il cavo di alimentazioene, non sento nessun rumore non si accende nessuna luce.
Non so cosa deve premere.
Mio padre dice che era perfettamente funzionante.