Problema driver eciadsl con modem D-Link dsl-200

[lancialesta]

Uso knoppix 3.4. Ho installato i driver eciadsl per questo modem usb, che dovrebbero funzionare con questo modello. La connessione però non va, qualcuno ha dei suggerimenti? Questo è l'errore che m'ha dato col file synch01:

setting up USB support (1/5)..

loading firmware (2/5)..

firmware seems to be already loaded

setting up modem (3/5)..

ECI load 2: success
synchronization successful

connecting modem (4/5)..

Couldn't get channel number: Input/output error
using channel 2
Failed to set PPP kernel option flags: Inappropriate ioctl for device
Using interface ppp0
Connect: ppp0 <--> /dev/pts/6
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 4445), status = 0xf4
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 4451), status = 0xf4
Modem hangup
Connection terminated.
using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/pts/7
Modem hangup
Connection terminated.
using channel 4
Failed to set PPP kernel option flags: Inappropriate ioctl for device
Using interface ppp0
Connect: ppp0 <--> /dev/pts/8
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 4467), status = 0xf4
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 4475), status = 0xf4
Modem hangup
Connection terminated.
using channel 5
Failed to set PPP kernel option flags: Inappropriate ioctl for device
Using interface ppp0
Connect: ppp0 <--> /dev/pts/9
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 4484), status = 0xf4
Modem hangup
Connection terminated.
using channel 6
Using interface ppp0
Connect: ppp0 <--> /dev/pts/10
Modem hangup
Connection terminated.
using channel 7
Failed to set PPP kernel option flags: Inappropriate ioctl for device
Using interface ppp0
Connect: ppp0 <--> /dev/pts/11
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 4493), status = 0xf4
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 4573), status = 0xf4
Modem hangup
Connection terminated.
using channel 8
Failed to set PPP kernel option flags: Inappropriate ioctl for device
Using interface ppp0
Connect: ppp0 <--> /dev/pts/12
Modem hangup
Connection terminated.
using channel 9
Failed to set PPP kernel option flags: Inappropriate ioctl for device
Using interface ppp0
Connect: ppp0 <--> /dev/pts/13
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 4584), status = 0xf4
Modem hangup
Connection terminated.
using channel 10
Failed to set PPP kernel option flags: Inappropriate ioctl for device
Using interface ppp0
Connect: ppp0 <--> /dev/pts/14
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 4596), status = 0xf4
Modem hangup
Connection terminated.
Waiting for 1 child processes...
script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364, pid 4605
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 4605), status = 0xf4
failed to connect

Questo è l'errore che mi ha dato col file synch03 e mi sembra pressochè identico, cambiano solo i "channel" (synch01 e synch03 erano i file che consigliavano di usare con il mio modem nel "readme"):

setting up USB support (1/5)..

loading firmware (2/5)..

firmware seems to be already loaded

setting up modem (3/5)..

ECI load 2: success
synchronization successful

connecting modem (4/5)..

using channel 11
Using interface ppp0
Connect: ppp0 <--> /dev/pts/17
Modem hangup
Connection terminated.
using channel 12
Failed to set PPP kernel option flags: Inappropriate ioctl for device
Using interface ppp0
Connect: ppp0 <--> /dev/pts/18
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 5529), status = 0xf4
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 5535), status = 0xf4
Modem hangup
Connection terminated.
using channel 13
Using interface ppp0
Connect: ppp0 <--> /dev/pts/19
Modem hangup
Connection terminated.
using channel 14
Failed to set PPP kernel option flags: Inappropriate ioctl for device
Using interface ppp0
Connect: ppp0 <--> /dev/pts/20
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 5546), status = 0xf4
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 5555), status = 0xf4
Modem hangup
Connection terminated.
using channel 15
Using interface ppp0
Connect: ppp0 <--> /dev/pts/21
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 5568), status = 0xf4
Modem hangup
Connection terminated.
using channel 16
Failed to set PPP kernel option flags: Inappropriate ioctl for device
Using interface ppp0
Connect: ppp0 <--> /dev/pts/22
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 5576), status = 0xf4
Modem hangup
Connection terminated.
using channel 17
Using interface ppp0
Connect: ppp0 <--> /dev/pts/23
Modem hangup
Connection terminated.
using channel 18
Failed to set PPP kernel option flags: Inappropriate ioctl for device
Using interface ppp0
Connect: ppp0 <--> /dev/pts/24
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 5585), status = 0xf4
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 5593), status = 0xf4
Modem hangup
Connection terminated.
using channel 19
Failed to set PPP kernel option flags: Inappropriate ioctl for device
Using interface ppp0
Connect: ppp0 <--> /dev/pts/25
Modem hangup
Connection terminated.
using channel 20
Failed to set PPP kernel option flags: Inappropriate ioctl for device
Using interface ppp0
Connect: ppp0 <--> /dev/pts/26
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 5609), status = 0xf4
Script /usr/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode VCM_RFC2364 finished (pid 5673), status = 0xf4
Modem hangup
Connection terminated.
failed to connect

Successivamente ho riprovato con synch01 e mi ha dato questo messaggio, evidenziando problemi di sincronizzazione che poco prima non c'erano in quanto la sincronizzazione andava a buon fine:

setting up USB support (1/5)..

loading firmware (2/5)..

firmware seems to be already loaded

setting up modem (3/5)..

ECI load 2: timeout
failed to get synchronization


Sono un pò in alto mare...:rolleyes:

[Breakthru]

Io non sono tuttora riuscito a usare il mio modem su linux.
pero' questo problema l'ho avuto e mi sembra dovuto al supporto USB.

hai provato a staccare la presa usb dal modem, aspettare che si resetta e riprovare?

il synch.bin devi sceglierlo in base al provider, o provarli tutti finche' non trovi uno che funziona.

prova a far partire lo script eci-doctor che cerca alcuni errori comuni.

p.s. da gentoo riesco a connettermi solo x pochi minuti.
con una distro demo di Suse 9.0 funziona benissimo.

io ho infostrada e si sincronizza il synch07.bin

Ciao.

[lancialesta]

Ciao! Anch'io ho infostrada. Potresti per favore confrontare il tuo file eciadsl.conf con questo?

VID1=0547
PID1=2131
VID2=0915
PID2=8000
MODE=VCM_RFC2364
VCI=35
VPI=8
FIRMWARE=/etc/eciadsl/firmware00.bin
SYNCH=/etc/eciadsl/synch03.bin
PPPD_USER=
PPPD_PASSWD=
USE_DHCP=no
USE_STATICIP=no
STATICIP=
GATEWAY=
MODEM=D-Link DSL200
PROVIDER=IT..Infostrada
DNS1=193.70.192.25
DNS2=193.70.152.25

Dimmi se anche te hai queste impostazioni. Per ora sono arrivato a provare fino al file synch15, prima di continuare a provarli tutti ho letto in un altro thread qui sotto che i driver non funzionano col kernel 2.6 che è quello che uso. Quindi proverò anche col 2.4 e vedrò cosa succede! Attendo comunque "febbrilmente" il confronto col tuo file! Grazie mille!

[12pippopluto34]

Originariamente inviato da lancialesta

[cut]

ho letto in un altro thread qui sotto che i driver non funzionano col kernel 2.6 che è quello che uso.


Per far funzionare gli eciadsl col 2.6 bisogna patchare i sorgenti del kernel, ricompilarlo ed installarlo.

La patch la trovi sul sito stesso degli eciadsl.