ULI55E
08-08-2004, 12:01
Ho installato K3b 0.11.11 su Slackware10, con kernel 2.6.7.
Quando masterizzo col mio Lite On 411s non ci sono problemi: riesco a masterizzare sia cd che dvd dati.
Quando invece provo a masterizzare col Plextor PX-W1610A niente da fare.
Può essere perchè il Lite On è in Master mentre il plex è in Slave?
Comunque vi riporto l'out che mi restituisce K3b quando fallisco con il Plex:
System
-----------------------
K3b Version:0.11.11
KDE Version: 3.2.3
QT Version: 3.3.2
cdrecord
-----------------------
/usr/local/bin/cdrecord: Operation not permitted. WARNING: Cannot do mlockall(2).
/usr/local/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/local/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/local/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/local/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdb'
devname: '/dev/hdb'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-W1610A'
Revision : '1.05'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1190112 = 1162 KB
FIFO size : 4194304 = 4096 KB
/usr/local/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/local/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/local/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
Track 01: data 694 MB
Total size: 797 MB (79:00.48) = 355536 sectors
Lout start: 797 MB (79:02/36) = 355536 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 0
Is not unrestricted
Is erasable
ATIP start of lead in: -11635 (97:26/65)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 8 2T speed high: 0 (reserved val 10)
power mult factor: 4 6
recommended erase/write power: 3
A1 values: 02 4C B0
A2 values: 4A C8 36
Disk type: Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 4313
Starting to write CD/DVD at speed 2 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds.
Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
/usr/local/bin/cdrecord: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 FF FF FF 89 00 00 1F 00
status: 0x8 (BUSY)
resid: 63488
cmd finished after 2.877s timeout 200s
/usr/local/bin/cdrecord: Success. read buffer cap: scsi sendcmd: no error
CDB: 5C 00 00 00 00 00 00 00 0C 00
status: 0x8 (BUSY)
resid: 12
cmd finished after 2.556s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 63488 bytes
Starting new track at sector: 0
Track 01: 0 of 694 MB written.
/usr/local/bin/cdrecord: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 03 00 00 00 1F 0A 00 00 00 00 0C 09 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0
Sense flags: Blk 31 (valid)
resid: 63488
cmd finished after 0.009s timeout 200s
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
write track data: error after 0 bytes
Writing time: 94.585s
Average write speed 55.2x.
Fixating...
/usr/local/bin/cdrecord: Success. flush cache: scsi sendcmd: no error
CDB: 35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s
Trouble flushing the cache
Fixating time: 0.006s
/usr/local/bin/cdrecord: fifo had 64 puts and 1 gets.
/usr/local/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord comand:
-----------------------
/usr/local/bin/cdrecord -v gracetime=2 dev=/dev/hdb speed=2 -dao driveropts=burnfree -eject -data -tsize=355536s -
mkisofs
-----------------------
355536
0.14% done, estimate finish Sun Aug 8 12:22:04 2004
0.29% done, estimate finish Sun Aug 8 12:16:08 2004
0.42% done, estimate finish Sun Aug 8 12:14:13 2004
0.56% done, estimate finish Sun Aug 8 12:13:15 2004
/usr/local/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1
mkisofs comand:
-----------------------
/usr/local/bin/mkisofs -gui -graft-points -V K3b data project -volset -A K3B THE CD KREATOR VERSION 0.11.11 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -P -p K3b - versione 0.11.11 -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-pinko/k3b7LOAbc.tmp -r -hide-list /tmp/kde-pinko/k3bhqpdUa.tmp -l -iso-level 2 -path-list /tmp/kde-pinko/k3b8TWCkc.tmp
Quando masterizzo col mio Lite On 411s non ci sono problemi: riesco a masterizzare sia cd che dvd dati.
Quando invece provo a masterizzare col Plextor PX-W1610A niente da fare.
Può essere perchè il Lite On è in Master mentre il plex è in Slave?
Comunque vi riporto l'out che mi restituisce K3b quando fallisco con il Plex:
System
-----------------------
K3b Version:0.11.11
KDE Version: 3.2.3
QT Version: 3.3.2
cdrecord
-----------------------
/usr/local/bin/cdrecord: Operation not permitted. WARNING: Cannot do mlockall(2).
/usr/local/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/local/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/local/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/local/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdb'
devname: '/dev/hdb'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-W1610A'
Revision : '1.05'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1190112 = 1162 KB
FIFO size : 4194304 = 4096 KB
/usr/local/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/local/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/local/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
Track 01: data 694 MB
Total size: 797 MB (79:00.48) = 355536 sectors
Lout start: 797 MB (79:02/36) = 355536 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 0
Is not unrestricted
Is erasable
ATIP start of lead in: -11635 (97:26/65)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 8 2T speed high: 0 (reserved val 10)
power mult factor: 4 6
recommended erase/write power: 3
A1 values: 02 4C B0
A2 values: 4A C8 36
Disk type: Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 4313
Starting to write CD/DVD at speed 2 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds.
Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
/usr/local/bin/cdrecord: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 FF FF FF 89 00 00 1F 00
status: 0x8 (BUSY)
resid: 63488
cmd finished after 2.877s timeout 200s
/usr/local/bin/cdrecord: Success. read buffer cap: scsi sendcmd: no error
CDB: 5C 00 00 00 00 00 00 00 0C 00
status: 0x8 (BUSY)
resid: 12
cmd finished after 2.556s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 63488 bytes
Starting new track at sector: 0
Track 01: 0 of 694 MB written.
/usr/local/bin/cdrecord: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 03 00 00 00 1F 0A 00 00 00 00 0C 09 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0
Sense flags: Blk 31 (valid)
resid: 63488
cmd finished after 0.009s timeout 200s
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
write track data: error after 0 bytes
Writing time: 94.585s
Average write speed 55.2x.
Fixating...
/usr/local/bin/cdrecord: Success. flush cache: scsi sendcmd: no error
CDB: 35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s
Trouble flushing the cache
Fixating time: 0.006s
/usr/local/bin/cdrecord: fifo had 64 puts and 1 gets.
/usr/local/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord comand:
-----------------------
/usr/local/bin/cdrecord -v gracetime=2 dev=/dev/hdb speed=2 -dao driveropts=burnfree -eject -data -tsize=355536s -
mkisofs
-----------------------
355536
0.14% done, estimate finish Sun Aug 8 12:22:04 2004
0.29% done, estimate finish Sun Aug 8 12:16:08 2004
0.42% done, estimate finish Sun Aug 8 12:14:13 2004
0.56% done, estimate finish Sun Aug 8 12:13:15 2004
/usr/local/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1
mkisofs comand:
-----------------------
/usr/local/bin/mkisofs -gui -graft-points -V K3b data project -volset -A K3B THE CD KREATOR VERSION 0.11.11 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -P -p K3b - versione 0.11.11 -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-pinko/k3b7LOAbc.tmp -r -hide-list /tmp/kde-pinko/k3bhqpdUa.tmp -l -iso-level 2 -path-list /tmp/kde-pinko/k3b8TWCkc.tmp