sonnet
16-07-2004, 23:22
ragazzi sul sito della mia mobo spiegano come installare un nuovo bios..ma io nn ci ho capito molto:confused:
queste sn le istruzioni
STEP 1F
Make a DOS boot diskette. (See example: Windows 98 O.S.)
Beware: Windows 2000 / XP are not allowed to make a DOS boot diskette.
(IO HO WINDOWS XP KOSA VUOL DIRE KE IO NN POSSO FFARE UN DISCO DI AVVIO???))
With an available floppy disk in the floppy drive. Please leave the diskette "UN-write protected" type. Double click the "My Computer" icon from Desktop, then click "3.5 diskette (A)" and right click to select "Format (M)".
Select the "Quick (erase)" for Format Type, and pick both "Display summary when finished" and "Copy system files", after that press "Start". That will format the floppy and copy the needed system files to it.
After the floppy has been formatted completely, please press "Close".
STEP 2FDownload BIOS and BIOS utility program.
Please go to PCCHIPS website http://www.pcchips.com.tw and click "Download".
At gDownloadh zone, click the "BIOS" and gBIOS Flash Utilityh.
Choose an appropriate model name in accordance with user's manual or based on the motherboard revision that can be found near the DIMM slot.
STEP 3 :
Make sure the system will boot from the floppy disk. After the system boot from floppy disk, type "A:\> dir" and press "Enter" to check the entire files in floppy A. Then type the "BIOS flash utility" and "BIOS file" after A:\>. In this case you have to type "A:\> aminf339 031205s.rom " and then press "Enter".
Now screen appears the following Flash Utility screen. Please check whether new BIOS tag is correct. Right after that, press [Enter] to start BIOS flash procedure or press [Esc] to abort.
Beware: Please do not turn off the system while you are upgrading BIOS. It will render your BIOS corrupted and system totally inoperative.
When the BIOS flash completed. It will auto restart the system.
STEP 4 : Load BIOS defaults
Normally the system redetects all devices after BIOS has been upgraded. Therefore, we highly recommend reloading the BIOS defaults after BIOS has been upgraded. This important step resets everything after the flash.
The boot up screen will indicate your motherboard model and current BIOS version.
Press [F1] key to enter BIOS setup when system is boot up. Use the arrows to highlight the item "LOAD OPTIMAL SETTINGS" then press "Enter". System will ask "Load Optimal Settings (Y/N)?" Press "Y" and "Enter" keys to confirm. Then press [F10] key to save & exit setup.
SE HO CAPITO BENE IO DOVREI FARE UN DISCO DI AVVIO E POI METTERE NEL FLOPPY IL BIOS E LUTILITY X FLASHARLO CREDO E POI NN HO CAPITO + NIENTE QCN SAPREBBE SPIEGARMI X FAVORE??
queste sn le istruzioni
STEP 1F
Make a DOS boot diskette. (See example: Windows 98 O.S.)
Beware: Windows 2000 / XP are not allowed to make a DOS boot diskette.
(IO HO WINDOWS XP KOSA VUOL DIRE KE IO NN POSSO FFARE UN DISCO DI AVVIO???))
With an available floppy disk in the floppy drive. Please leave the diskette "UN-write protected" type. Double click the "My Computer" icon from Desktop, then click "3.5 diskette (A)" and right click to select "Format (M)".
Select the "Quick (erase)" for Format Type, and pick both "Display summary when finished" and "Copy system files", after that press "Start". That will format the floppy and copy the needed system files to it.
After the floppy has been formatted completely, please press "Close".
STEP 2FDownload BIOS and BIOS utility program.
Please go to PCCHIPS website http://www.pcchips.com.tw and click "Download".
At gDownloadh zone, click the "BIOS" and gBIOS Flash Utilityh.
Choose an appropriate model name in accordance with user's manual or based on the motherboard revision that can be found near the DIMM slot.
STEP 3 :
Make sure the system will boot from the floppy disk. After the system boot from floppy disk, type "A:\> dir" and press "Enter" to check the entire files in floppy A. Then type the "BIOS flash utility" and "BIOS file" after A:\>. In this case you have to type "A:\> aminf339 031205s.rom " and then press "Enter".
Now screen appears the following Flash Utility screen. Please check whether new BIOS tag is correct. Right after that, press [Enter] to start BIOS flash procedure or press [Esc] to abort.
Beware: Please do not turn off the system while you are upgrading BIOS. It will render your BIOS corrupted and system totally inoperative.
When the BIOS flash completed. It will auto restart the system.
STEP 4 : Load BIOS defaults
Normally the system redetects all devices after BIOS has been upgraded. Therefore, we highly recommend reloading the BIOS defaults after BIOS has been upgraded. This important step resets everything after the flash.
The boot up screen will indicate your motherboard model and current BIOS version.
Press [F1] key to enter BIOS setup when system is boot up. Use the arrows to highlight the item "LOAD OPTIMAL SETTINGS" then press "Enter". System will ask "Load Optimal Settings (Y/N)?" Press "Y" and "Enter" keys to confirm. Then press [F10] key to save & exit setup.
SE HO CAPITO BENE IO DOVREI FARE UN DISCO DI AVVIO E POI METTERE NEL FLOPPY IL BIOS E LUTILITY X FLASHARLO CREDO E POI NN HO CAPITO + NIENTE QCN SAPREBBE SPIEGARMI X FAVORE??