Ghepardo
30-01-2004, 10:47
Allora raga queste sono le caratteristiche del mio pc:
CPU-Z Report
--------------------------------------------------------------------------------
CPU-Z version 1.20a.
CPU(s)
Number of CPUs 1
Code Name Palomino
Specification AMD Athlon(tm) XP processor 2100+
Family / Model / Stepping 6 6 2
Extended Family / Model 7 6
Technology 0.18 µ
Supported Instructions Sets MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE
CPU Clock Speed 1750.1 MHz
Clock multiplier x 12.5
Front Side Bus Frequency 140.0 MHz
Bus Speed 280.0 MHz
L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L1 Instruction Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L2 Cache 256 KBytes, 16-way set associative, 64 Bytes line size
L2 Speed 1750.1 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 64 bits
Mainboard and chipset
Motherboard model VT8366-8233,
BIOS vendor Award Software International, Inc.
BIOS revision 6.00 PG
BIOS release date 03/14/2002
Chipset VIA KT266/333 rev. 0
Southbridge VIA VT8233 rev. 0
Sensor chip IT 0
AGP Status enabled, rev. 2.0
AGP Data Transfert Rate 4x
AGP Side Band Addressing supported, enabled
AGP Aperture Size 256 MBytes
Memory
DRAM Type DDR-SDRAM
DRAM Size 768 MBytes
DRAM Frequency 140.0 MHz
FSB:DRAM 1:1
DRAM Interleave none
CAS# Latency 2.5 clocks
RAS# to CAS# 3 clocks
RAS# Precharge 3 clocks
Cycle Time (TRAS) 6 clocks
# of memory modules 2
Module 0 SpecTek Incorporated DDR-SDRAM PC2700 - 256 MBytes
Module 1 Kingston DDR-SDRAM PC3200 - 512 MBytes
Software
Windows version Microsoft Windows XP Workstation Service Pack 1 (Build 2600)
ho overclokkato l' FSB da 133 a 140. e sembra reggere bene (premetto ke le memorie, come avete letto, sono una da 400mhz e laltra da 333, quindi dovrebbero reggere tranquillamente).
ora, se lo lascio così, rischio di rompere tutto?
e se lo metto a 150?
consigliatemi tnx!
CPU-Z Report
--------------------------------------------------------------------------------
CPU-Z version 1.20a.
CPU(s)
Number of CPUs 1
Code Name Palomino
Specification AMD Athlon(tm) XP processor 2100+
Family / Model / Stepping 6 6 2
Extended Family / Model 7 6
Technology 0.18 µ
Supported Instructions Sets MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE
CPU Clock Speed 1750.1 MHz
Clock multiplier x 12.5
Front Side Bus Frequency 140.0 MHz
Bus Speed 280.0 MHz
L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L1 Instruction Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L2 Cache 256 KBytes, 16-way set associative, 64 Bytes line size
L2 Speed 1750.1 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 64 bits
Mainboard and chipset
Motherboard model VT8366-8233,
BIOS vendor Award Software International, Inc.
BIOS revision 6.00 PG
BIOS release date 03/14/2002
Chipset VIA KT266/333 rev. 0
Southbridge VIA VT8233 rev. 0
Sensor chip IT 0
AGP Status enabled, rev. 2.0
AGP Data Transfert Rate 4x
AGP Side Band Addressing supported, enabled
AGP Aperture Size 256 MBytes
Memory
DRAM Type DDR-SDRAM
DRAM Size 768 MBytes
DRAM Frequency 140.0 MHz
FSB:DRAM 1:1
DRAM Interleave none
CAS# Latency 2.5 clocks
RAS# to CAS# 3 clocks
RAS# Precharge 3 clocks
Cycle Time (TRAS) 6 clocks
# of memory modules 2
Module 0 SpecTek Incorporated DDR-SDRAM PC2700 - 256 MBytes
Module 1 Kingston DDR-SDRAM PC3200 - 512 MBytes
Software
Windows version Microsoft Windows XP Workstation Service Pack 1 (Build 2600)
ho overclokkato l' FSB da 133 a 140. e sembra reggere bene (premetto ke le memorie, come avete letto, sono una da 400mhz e laltra da 333, quindi dovrebbero reggere tranquillamente).
ora, se lo lascio così, rischio di rompere tutto?
e se lo metto a 150?
consigliatemi tnx!