maledetto modem........

[Miky Mouse]

ciao a tutti,
premetto che sono un novellino di linux!
allora io ho un modem Smart Link usb56 e linux mandrake 9.0.

ho scaricato i driver x il modem (esistono x linux!!). la usb è abilitata. quindi scompatto i driver in una cartella. nel readme c'è scritto di lanciare un "make" nella cartella ma quando lo faccio non va tutto come dovrebbe andare..... comincia a darmi 2000 errori...... forse dovrei modificare un parametro...
devo cambiare INCLUDE_KERNEL con la cartella ma non so che ci devo mettere!!


help me please!!
mikymouse

[Miky Mouse]

se può servire vi incollo anche il makefile:

###########################################################################
#
#
# Makefile -- Smart Link Soft Modem product Makefile.
#
# Copyright (C) 2001
# Smart Link Ltd. (www.smlink.com)
#
# Author: Sasha K ([email protected])
#
#
###########################################################################
#
###########################################################################


# Tools
CC := gcc
LD := ld
INSTALL := install
DEPMOD := /sbin/depmod
MODPROBE:= /sbin/modprobe
RM := rm
LN := ln
SED := sed
GREP := grep
CP := cp
MKNOD := mknod

# debug mode options /* off */
# DEBUG:=0
-include debug.mk

# Definitions
MODULES_DIR = /lib/modules/$(shell ./kernel-ver)/misc
MODEM_DEV := ttySL0
MODEM_LINK := modem
MODULES_CONF:= /etc/modules.conf

# Path to your kernel's includes
ifndef KERNEL_INCLUDES
KERNEL_INCLUDES:= /usr/src/linux/include
endif

INCLUDES := -I. -I$(KERNEL_INCLUDES)

ifndef MODVERSIONS_FLAGS
MODVERSIONS_FLAGS= -DMODVERSIONS --include $(KERNEL_INCLUDES)/linux/modversions.h
endif


# C FLAGS
CFLAGS:= -Wall -O3 -fomit-frame-pointer -D__KERNEL__ -DMODULE -DEXPORT_SYMTAB $(INCLUDES) $(MODVERSIONS_FLAGS)
#CFLAGS:= -Wall -O3 -fomit-frame-pointer -DMODEM_DEBUG=$(DEBUG) -D__KERNEL__ -DMODULE -DEXPORT_SYMTAB $(INCLUDES) $(MODVERSIONS_FLAGS)
ifdef DEBUG
CFLAGS += -DMODEM_DEBUG=$(DEBUG)
endif
LFLAGS=

SLMDM := slmdm.o
SLAMR := slamrmo.o
SLUSB := slusb.o
SLFAX := slfax.o

ALL_TARGETS := $(SLAMR) $(SLUSB) $(SLMDM) $(SLFAX)

SLAMR_OBJ := amrmo.o
SLUSB_OBJ := usb.o
SLMDM_OBJ := mdm.o
SLFAX_OBJ := fax.o

MDM_OBJS := mdm_init.o mdm_sltty.o mdm_country.o
FAX_OBJS := fax_init.o
AMR_OBJS := amrmo_init.o
USB_OBJS := usb_st7554.o
CUSTOM_OBJ := editme.o
SYSDEP_OBJ := sysdep.o
SYSDEP_LINUX_OBJ:= sysdep_linux.o
SYSDEP_PCI_OBJ := sysdep_pci.o


all: $(ALL_TARGETS) kernel-ver

$(SLAMR): $(SLAMR_OBJ) $(AMR_OBJS) $(SYSDEP_PCI_OBJ)
$(SLUSB): $(SLUSB_OBJ) $(USB_OBJS)
$(SLMDM): $(SLMDM_OBJ) $(MDM_OBJS) $(CUSTOM_OBJ) $(SYSDEP_OBJ) $(SYSDEP_LINUX_OBJ)
$(SLFAX): $(SLFAX_OBJ) $(FAX_OBJS)

$(ALL_TARGETS):
$(LD) -r -o $@ $^

kernel-ver: kernel-ver.o

install-amr: install config-amr
install-usb: install config-usb

install: kernel-ver all
$(INSTALL) -D -m 644 slmdm.o $(prefix_dir)/$(MODULES_DIR)/slmdm.o
$(INSTALL) -D -m 644 slfax.o $(prefix_dir)/$(MODULES_DIR)/slfax.o
$(INSTALL) -D -m 644 slamrmo.o $(prefix_dir)/$(MODULES_DIR)/slamrmo.o
$(INSTALL) -D -m 644 slusb.o $(prefix_dir)/$(MODULES_DIR)/slusb.o
$(INSTALL) -D -m 755 country.dat $(prefix_dir)/etc/country.dat
$(INSTALL) -d $(prefix_dir)/dev
$(RM) -f $(prefix_dir)/dev/$(MODEM_DEV)
$(MKNOD) -m 666 $(prefix_dir)/dev/$(MODEM_DEV) c 212 0
$(LN) -sf ./$(MODEM_DEV) $(prefix_dir)/dev/$(MODEM_LINK)

uninstall: kernel-ver cleanup-config unload-modules
$(RM) -f $(prefix_dir)/$(MODULES_DIR)/slmdm.o
$(RM) -f $(prefix_dir)/$(MODULES_DIR)/slfax.o
$(RM) -f $(prefix_dir)/$(MODULES_DIR)/slamrmo.o
$(RM) -f $(prefix_dir)/$(MODULES_DIR)/slusb.o
$(RM) -f $(prefix_dir)/etc/country.dat
$(RM) -f $(prefix_dir)/dev/$(MODEM_DEV)
$(RM) -f $(prefix_dir)/dev/$(MODEM_LINK)

config-usb: config
$(CP) $(MODULES_CONF) $(MODULES_CONF).slmdm && \
$(SED) -e 's/^alias slmodem .*$$/alias slmodem slusb/' $(MODULES_CONF).slmdm > $(MODULES_CONF)
$(DEPMOD) -a || echo -n

config-amr: config
$(CP) $(MODULES_CONF) $(MODULES_CONF)\.slmdm && \
$(SED) -e 's/^alias slmodem .*$$/alias slmodem slamrmo/' $(MODULES_CONF).slmdm > $(MODULES_CONF)
$(DEPMOD) -a || echo -n

config: cleanup-config
$(CP) $(MODULES_CONF) $(MODULES_CONF).slmdm || echo -n
echo 'alias char-major-212 slmodem' >> $(MODULES_CONF)
echo 'alias slmodem off' >> $(MODULES_CONF)

cleanup-config: unload-modules
$(CP) $(MODULES_CONF) $(MODULES_CONF).slmdm && \
$(GREP) -v 'slmodem' $(MODULES_CONF).slmdm > $(MODULES_CONF) || \
echo -n ; \
$(DEPMOD) -a || echo -n

unload-modules:
$(MODPROBE) -r slusb
$(MODPROBE) -r slamrmo
$(MODPROBE) -r slfax
$(MODPROBE) -r slmdm

spec-file-lists: slmdm.modules slamr.modules slusb.modules

%.modules: kernel-ver
@echo "build modules list spec file $@..."
$(SED) -e 's/%modules_dir/$(subst /,\/,$(MODULES_DIR))/' $@-dist > $@

clean:
$(RM) -f $(ALL_TARGETS) $(MDM_OBJS) $(FAX_OBJS) $(AMR_OBJS) $(USB_OBJS) $(CUSTOM_OBJ) $(SYSDEP_OBJ) $(SYSDEP_LINUX_OBJ) $(SYSDEP_PCI_OBJ) kernel-ver kernel-ver.o
$(RM) -f *.modules

%.o: %.c
$(CC) $(CFLAGS) -o $@ -c $<

dep:
$(CC) -M -c $(CFLAGS) *.c > .depend
-include .depend

[ilsensine]

urpmi kernel-source

[Miky Mouse]

traduzione in italiano? scusa sn 2 giorni che uso linux..... praticamente che devo fare?
grazie
mikymouse

[NA01]

è un comando ;)
scrivilo sulla console

ciao

[Drunk Horse]

Hai un modem simile al mio e usi gli stessi driver!!Sono riuscito a farlo funzionare oggi!!!Ti và veramente bene!!!
Devi accertarti di avere i sorgenti del kernel installati..
Come dice NA01 scrivi il comando in un terminale/console/shell...

[Miky Mouse]

ok.... in effetti avevo capito già da prima che era un comando ma non ero sicuro. ok installati i pacchetti dato il make eil make install-usb....... solo che adesso la connessione rimane in "ricerca modem" e non si schioda... che mi invento????
vabbe mo vado a smanettare. dopo torno.
grazie 1000 x l'aiuto!! :)

[Drunk Horse]

Originariamente inviato da Miky Mouse
ok.... in effetti avevo capito già da prima che era un comando ma non ero sicuro. ok installati i pacchetti dato il make eil make install-usb....... solo che adesso la connessione rimane in "ricerca modem" e non si schioda... che mi invento????
vabbe mo vado a smanettare. dopo torno.
grazie 1000 x l'aiuto!! :)


Corri troppo!!!

Se make-usb è andato a buon fine devi caricare i moduli:
(Sempre comandi sono :D )

/sbin/modprobe slusb

(non ricordo+ se è slusb o lsusb ma cmq e scritto nel readme)
Poi

lsmod

e controlla che ci siano slmodem e slusb
dopo di che fai un link simbolico (man ln per imparare bene :D ) /dev/modem a /dev/ttySL0 che è il motivo per cui ti dà l'errore..

..poi puoi usare kppp (o ciò che usi per connetterti)

Saluti

[Miky Mouse]

ho fatto un passettino avanti... ma ancora niente!!!!

allora ho caricato tutto come hai detto tu e come diceva anche il readme. mi trovo con:
[root@localhost slmdm-2.7.14]# kppp

e lui mi risponde così:

Xlib: extension "GLX" missing on display ":0.0".
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
_KDE_IceTransmkdir: Owner of /tmp/.ICE-unix should be set to root
DCOPServer up and running.
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
Xlib: extension "GLX" missing on display ":0.0".
Opener: received SetSecret
Opener: received OpenLock

Opener: received OpenDevice
Opener: received RemoveLock
Opener: received RemoveSecret
Opener: received RemoveSecret
Opener: received OpenResolv
Opener: received OpenResolv
Opener: received KillPPPDaemon


mi apre la finestra x la connessione... modem pronto... "spiacente. il modem non risponde"

che faccio?? butto il modem?? butto il computer?? fatemi sapere. io intanto vado a letto xke ho sonno. x oggi ho tribolato abbastanza. buona notte a tutti

[Drunk Horse]

Calma!!Bisogna ragionare non buttare via tutto!!!
Lasciamo perdere kppp per un pò!!Usi Gnome o KDE??

Ricordati che i drivers vanno caricati ogni volta quindi o te lo fai a mano (ma perchè??) oppure aggiungi la solita riga /sbin/modprobe slusb nel file /etc/rc.d/rc.modules o meglio se ce l'hai rc.local
Cosi ogni volta al boot i driver vengono caricati!!
Adesso ricaricali a mano o riavvia!!

poi da shell lancia

ppp-on

e vedi cosa ti dice!!Quasi sicuramente non andrà!!
Il file che devi modificare a mano è /etc/ppp/pppscript e deve essere così:


TIMEOUT 60
ABORT ERROR
ABORT BUSY
ABORT "NO CARRIER"
ABORT "NO DIALTONE"
"" "ATZ" OK
"AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0" OK
"ATX3DTnumerotelefonoisp"
TIMEOUT 75
CONNECT


..poi recupera i DNS del tuo provider e inseriscili nel file /etc/resolv.confcosì:

nameserver ipDNSdeltuoisp
nameserver ipDNSdeltuoisp

per il momento adoperati per fare ciò...
Saluti

[Miky Mouse]

ancora non ci siamo..... allora mi hai detto di fare un link simbolico, riesco a farlo a /dev/ttySL0 ma quando provo a farlo a /dev/modem mi da un errore dicendo che non può sovreascrivere una directory.

poi lo script del ppp non esisteva, l'ho creato io e ci ho messo quello che mi avete detto, ma poi lo devo caricare o cosa??
e poi alla linea dello script

"ATX3DTnumerotelefonoisp"

devo sostituire nomeroisp o lo devo lasciare così??

smanettando ho visto che se imposto come modem /dev/modem la connessione si blocca in "ricerca modem.........". se invece imposto /dev/ttySL0 mi dice "modem pronto" ma poi da un errore: "spiacente il modem non risponde" o qualcosa del genere.

help e scusate x gli errori e le banalità che chiedo.......
bye

[Drunk Horse]

il link simbolico vuol di modem a ttySL0 vuol dire che /dev modem punta a /dev/ttySL0:

ln -s /dev/modem /dev/ttySL0

pppscript non esisteva perchè prima avrei dovuto farti lanciare pppsetup ma pensavo si potesse evitare il passaggio
quindi lancia

pppsetup

..poi bisognerà metter a posto qlcsa a mano...come ad esempio pppscript
Hai inserito i dns in /etc/resolv.conf??

...il numero di telefono ce lo devi mettere al posto della parola numerotelefonoisp

ad esempio:
ATX3DT0258965854

...smanettare fà bene e ti sei accorto del perchè devi linkare /dev/modem a /ttySL0...

Vai tranquillo che lo facciamo funzionare...al max sputtaniamo l'ordine del cosmo ma cosa vuoi che sia... :D

[ilsensine]

Originariamente inviato da Drunk Horse
ln -s /dev/modem /dev/ttySL0

I parametri sono invertiti...

[Drunk Horse]

Originariamente inviato da ilsensine
I parametri sono invertiti...

:fiufiu:

[Miky Mouse]

ok..... l'entropia universale stà già aumentando..... (senti che paroloni... :D ).

appena posso provo le modifiche che m hai detto e t faccio sapere. i dns li avevo messi! io lo faccio quello che mi dici! :cool:

solo che nn avevo messo il numero del provider xke nn avevo proprio fatto caso a quella riga... l'ho vista solo quando ho risposto e allora ho chiesto! :rolleyes:

cmq se avessi usato "ttySL0" invece che "modem" x connettermi non avrei dovuto fare il ln -s giusto? ti prego dimmi che è servito a imparare qualcosa tutto stò casino! :( :D

stasera metterò un altro post.... e spero che sarà da linux e non da questo insopportabile windozzzzzzz.
bye

[Drunk Horse]

Originariamente inviato da Miky Mouse
cmq se avessi usato "ttySL0" invece che "modem" x connettermi non avrei dovuto fare il ln -s giusto? ti prego dimmi che è servito a imparare qualcosa tutto stò casino! :( :D


Esatto!!Visto che si impara alla svelta....
Il link lo fai perchè /dev/modem è il device generalmente usato di default!
Non imparare da mè...ma da ilsensine che è molto meglio :D

Andiamo oltre...
Controlla che il file /etc/ppp/pap-secrets sia simile a questo:


# Username Server Password IP addresses
"myusername" * "mypassword"


dove chiaramente al posto di myusername e mypasswd ci deve essere i tuoi dati...se nn ci sono metticeli!!

Il file /etc/ppp/options:


lock
defaultroute
noipdefault
modem
/dev/modem
57600
crtscts
passive
asyncmap 0
name "myusername


..dove al posto di myusername ci và il tuo username
Il tuo resolv.conf dovrebbe essere così:


search your_isp.com
nameserver ....
nameserver ....


dove al posto di your_ip.com ci metti il dominio del tuo isp ad esemp libero.it

Fatto ciò dovrebbe essere tutto a posto :angel:
Prova col solito ppp-on e facci saper...
...se non dovrebbe andare a buon fine....posta il file /var/log/messages
Saluti

[Miky Mouse]

niente........ comunque il "ln -s" non è servito a nulla perche' continua a darmi sempre i soliti errori: se unso /dev/modem rimane su "ricerca modem........" se uso /dev/ttySL0 mi dice "spiacente il modem non risponde". poi non riconosce il comando ppp-on. tutti i file che dovevo modificare/editare mi ho modificati/editati. ecco il maledetto file messages (ho preso solo la parte che riguarda oggi).... ma anche se sono un novellino mi pare che sia pieno di errori.... :(

Nov 19 21:39:16 localhost syslogd 1.4.1: restart.
Nov 19 21:39:16 localhost kernel: klogd 1.4.1, log source = /proc/kmsg started.
Nov 19 21:39:16 localhost kernel: Inspecting /boot/System.map-2.4.19-16mdk
nov 19 21:39:16 localhost partmon: Checking if partitions have enough free diskspace:
Nov 19 21:39:16 localhost kernel: Loaded 16805 symbols from /boot/System.map-2.4.19-16mdk.
Nov 19 21:39:16 localhost kernel: Symbols match kernel version 2.4.19.
Nov 19 21:39:16 localhost kernel: Loaded 409 symbols from 21 modules.
Nov 19 21:39:16 localhost kernel: Linux version 2.4.19-16mdk ([email protected]) (gcc version 3.2 (Mandrake Linux 9.0 3.2-1mdk)) #1 Fri Sep 20 18:15:05 CEST 2002
Nov 19 21:39:16 localhost kernel: BIOS-provided physical RAM map:
Nov 19 21:39:16 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Nov 19 21:39:16 localhost kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Nov 19 21:39:16 localhost kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Nov 19 21:39:16 localhost kernel: BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
Nov 19 21:39:16 localhost kernel: BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
Nov 19 21:39:16 localhost kernel: BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
Nov 19 21:39:16 localhost kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Nov 19 21:39:16 localhost kernel: 255MB LOWMEM available.
Nov 19 21:39:16 localhost kernel: Advanced speculative caching feature present
Nov 19 21:39:16 localhost kernel: On node 0 totalpages: 65520
Nov 19 21:39:16 localhost kernel: zone(0): 4096 pages.
Nov 19 21:39:16 localhost kernel: zone(1): 61424 pages.
Nov 19 21:39:16 localhost kernel: zone(2): 0 pages.
Nov 19 21:39:16 localhost kernel: Kernel command line: BOOT_IMAGE=linux ro root=305 devfs=mount hdc=ide-scsi quiet
Nov 19 21:39:16 localhost kernel: ide_setup: hdc=ide-scsi
Nov 19 21:39:16 localhost kernel: Local APIC disabled by BIOS -- reenabling.
Nov 19 21:39:16 localhost kernel: Found and enabled local APIC!
Nov 19 21:39:16 localhost kernel: Initializing CPU#0
Nov 19 21:39:16 localhost kernel: Detected 1544.687 MHz processor.
Nov 19 21:39:16 localhost kernel: Console: colour dummy device 80x25
Nov 19 21:39:16 localhost kernel: Calibrating delay loop... 3080.19 BogoMIPS
Nov 19 21:39:16 localhost kernel: Memory: 256440k/262080k available (1176k kernel code, 5252k reserved, 444k data, 136k init, 0k highmem)
Nov 19 21:39:16 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Nov 19 21:39:16 localhost kernel: Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Nov 19 21:39:16 localhost kernel: Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Nov 19 21:39:16 localhost kernel: Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Nov 19 21:39:16 localhost kernel: Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Nov 19 21:39:16 localhost kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 19 21:39:16 localhost kernel: Advanced speculative caching feature present
Nov 19 21:39:16 localhost kernel: Disabling advanced speculative caching
Nov 19 21:39:16 localhost kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Nov 19 21:39:16 localhost kernel: CPU: L2 Cache: 256K (64 bytes/line)
Nov 19 21:39:16 localhost kernel: Intel machine check architecture supported.
Nov 19 21:39:16 localhost kernel: Intel machine check reporting enabled on CPU#0.
Nov 19 21:39:16 localhost kernel: CPU: AMD Athlon(tm) XP 1800+ stepping 02
Nov 19 21:39:16 localhost kernel: Enabling fast FPU save and restore... done.
Nov 19 21:39:16 localhost kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 19 21:39:16 localhost kernel: Checking 'hlt' instruction... OK.
Nov 19 21:39:16 localhost kernel: POSIX conformance testing by UNIFIX
Nov 19 21:39:16 localhost kernel: enabled ExtINT on CPU#0
Nov 19 21:39:16 localhost kernel: ESR value before enabling vector: 00000000
Nov 19 21:39:16 localhost kernel: ESR value after enabling vector: 00000000
Nov 19 21:39:16 localhost kernel: Using local APIC timer interrupts.
Nov 19 21:39:16 localhost kernel: calibrating APIC timer ...
Nov 19 21:39:16 localhost kernel: ..... CPU clock speed is 1544.6468 MHz.
Nov 19 21:39:16 localhost kernel: ..... host bus clock speed is 268.6342 MHz.
Nov 19 21:39:16 localhost kernel: cpu: 0, clocks: 2686342, slice: 1343171
Nov 19 21:39:16 localhost kernel: CPU0<T0:2686336,T1:1343152,D:13,S:1343171,C:2686342>
Nov 19 21:39:16 localhost kernel: mtrr: v1.40 (20010327) Richard Gooch ([email protected])
Nov 19 21:39:16 localhost kernel: mtrr: detected mtrr type: Intel
Nov 19 21:39:16 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb260, last bus=1
Nov 19 21:39:16 localhost kernel: PCI: Using configuration type 1
Nov 19 21:39:16 localhost kernel: PCI: Probing PCI hardware
Nov 19 21:39:16 localhost kernel: Unknown bridge resource 0: assuming transparent
Nov 19 21:39:16 localhost kernel: PCI: Using IRQ router default [1106/3099] at 00:00.0
Nov 19 21:39:16 localhost kernel: isapnp: Scanning for PnP cards...
Nov 19 21:39:16 localhost kernel: isapnp: No Plug & Play device found
Nov 19 21:39:16 localhost kernel: Linux NET4.0 for Linux 2.4
Nov 19 21:39:16 localhost kernel: Based upon Swansea University Computer Society NET3.039
Nov 19 21:39:16 localhost kernel: Initializing RT netlink socket
Nov 19 21:39:16 localhost kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Nov 19 21:39:16 localhost kernel: Starting kswapd
Nov 19 21:39:16 localhost kernel: VFS: Diskquotas version dquot_6.5.0 initialized
Nov 19 21:39:16 localhost kernel: devfs: v1.12a (20020514) Richard Gooch ([email protected])
Nov 19 21:39:16 localhost kernel: devfs: boot_options: 0x1
Nov 19 21:39:16 localhost kernel: vesafb: framebuffer at 0xd0000000, mapped to 0xd0800000, size 65536k
Nov 19 21:39:16 localhost kernel: vesafb: mode is 1024x768x16, linelength=2048, pages=1
Nov 19 21:39:16 localhost kernel: vesafb: protected mode interface info at c000:ea70
Nov 19 21:39:16 localhost kernel: vesafb: scrolling: redraw
Nov 19 21:39:16 localhost kernel: vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Nov 19 21:39:16 localhost kernel: Looking for splash picture.... no good signature found.
Nov 19 21:39:16 localhost kernel: Console: switching to colour frame buffer device 128x48
Nov 19 21:39:16 localhost kernel: fb0: VESA VGA frame buffer device
Nov 19 21:39:16 localhost kernel: pty: 256 Unix98 ptys configured
Nov 19 21:39:16 localhost kernel: Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Nov 19 21:39:16 localhost kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Nov 19 21:39:16 localhost kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Nov 19 21:39:16 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 19 21:39:16 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 19 21:39:16 localhost kernel: VP_IDE: IDE controller on PCI bus 00 dev 89
Nov 19 21:39:16 localhost kernel: PCI: No IRQ known for interrupt pin A of device 00:11.1. Please try using pci=biosirq.
Nov 19 21:39:16 localhost kernel: VP_IDE: chipset revision 6
Nov 19 21:39:16 localhost kernel: VP_IDE: not 100%% native mode: will probe irqs later
Nov 19 21:39:16 localhost kernel: VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
Nov 19 21:39:16 localhost kernel: ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
Nov 19 21:39:16 localhost kernel: ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
Nov 19 21:39:16 localhost kernel: hda: Maxtor 6Y120L0, ATA DISK drive
Nov 19 21:39:16 localhost kernel: hdb: MAXTOR 6L060J3, ATA DISK drive
Nov 19 21:39:16 localhost kernel: hdc: LITE-ON LTR-32123S, ATAPI CD/DVD-ROM drive
Nov 19 21:39:16 localhost kernel: hdd: Pioneer DVD-ROM ATAPIModel DVD-105S 012, ATAPI CD/DVD-ROM drive
Nov 19 21:39:16 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 19 21:39:16 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 19 21:39:16 localhost kernel: hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(133)
Nov 19 21:39:16 localhost kernel: hdb: 117266688 sectors (60041 MB) w/1819KiB Cache, CHS=7299/255/63, UDMA(133)
Nov 19 21:39:16 localhost kernel: Partition check:
Nov 19 21:39:16 localhost kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
Nov 19 21:39:16 localhost kernel: /dev/ide/host0/bus0/target1/lun0: p1
Nov 19 21:39:16 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Nov 19 21:39:16 localhost kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Nov 19 21:39:16 localhost kernel: md: Autodetecting RAID arrays.
Nov 19 21:39:16 localhost kernel: md: autorun ...
Nov 19 21:39:16 localhost kernel: md: ... autorun DONE.
Nov 19 21:39:16 localhost kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Nov 19 21:39:16 localhost kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Nov 19 21:39:16 localhost kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
Nov 19 21:39:16 localhost kernel: TCP: Hash tables configured (established 16384 bind 32768)
Nov 19 21:39:16 localhost kernel: Linux IP multicast router 0.06 plus PIM-SM
Nov 19 21:39:16 localhost kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Nov 19 21:39:16 localhost kernel: RAMDISK: Compressed image found at block 0
Nov 19 21:39:16 localhost kernel: Freeing initrd memory: 121k freed
Nov 19 21:39:16 localhost kernel: VFS: Mounted root (ext2 filesystem).
Nov 19 21:39:16 localhost kernel: Mounted devfs on /dev
Nov 19 21:39:16 localhost kernel: Journalled Block Device driver loaded
Nov 19 21:39:16 localhost kernel: kjournald starting. Commit interval 5 seconds
Nov 19 21:39:16 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 19 21:39:16 localhost kernel: Mounted devfs on /dev
Nov 19 21:39:16 localhost kernel: Freeing unused kernel memory: 136k freed
Nov 19 21:39:16 localhost kernel: Real Time Clock Driver v1.10e
Nov 19 21:39:16 localhost kernel: usb.c: registered new driver usbdevfs
Nov 19 21:39:16 localhost kernel: usb.c: registered new driver hub
Nov 19 21:39:16 localhost kernel: usb-uhci.c: $Revision: 1.275 $ time 18:49:04 Sep 20 2002
Nov 19 21:39:16 localhost kernel: usb-uhci.c: High bandwidth mode enabled
Nov 19 21:39:16 localhost kernel: usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 5
Nov 19 21:39:16 localhost kernel: usb-uhci.c: Detected 2 ports
Nov 19 21:39:16 localhost kernel: usb.c: new USB bus registered, assigned bus number 1
Nov 19 21:39:16 localhost kernel: hub.c: USB hub found
Nov 19 21:39:16 localhost kernel: hub.c: 2 ports detected
Nov 19 21:39:16 localhost kernel: usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 5
Nov 19 21:39:16 localhost kernel: usb-uhci.c: Detected 2 ports
Nov 19 21:39:16 localhost kernel: usb.c: new USB bus registered, assigned bus number 2
Nov 19 21:39:16 localhost kernel: hub.c: USB hub found
Nov 19 21:39:16 localhost kernel: hub.c: 2 ports detected
Nov 19 21:39:16 localhost kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Nov 19 21:39:16 localhost kernel: usbdevfs: remount parameter error
Nov 19 21:39:16 localhost kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,5), internal journal
Nov 19 21:39:16 localhost kernel: Adding Swap: 2097136k swap-space (priority -1)
Nov 19 21:39:16 localhost kernel: hub.c: USB new device connect on bus1/2, assigned device number 2
Nov 19 21:39:16 localhost kernel: usb.c: USB device 2 (vend/prod 0x483/0x7554) is not claimed by any active driver.
Nov 19 21:39:16 localhost kernel: slmdm: version 2.7.14 Apr 6 2003 16:09:06 (Smart Link Ltd.).
Nov 19 21:39:16 localhost kernel: slmdm: country set is 0x59 (ITALY).
Nov 19 21:39:16 localhost kernel: ST7554 USB Modem.
Nov 19 21:39:16 localhost kernel: usb.c: registered new driver ST7554 USB Modem
Nov 19 21:39:16 localhost kernel: Unable to handle kernel paging request at virtual address 6f732e7c
Nov 19 21:39:16 localhost kernel: printing eip:
Nov 19 21:39:16 localhost kernel: d483dc80
Nov 19 21:39:16 localhost kernel: *pde = 00000000
Nov 19 21:39:16 localhost kernel: Oops: 0000
Nov 19 21:39:16 localhost kernel: CPU: 0
Nov 19 21:39:16 localhost kernel: EIP: 0010:[ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-2581376/96] Tainted: P
Nov 19 21:39:16 localhost kernel: EIP: 0010:[<d483dc80>] Tainted: P
Nov 19 21:39:16 localhost kernel: EFLAGS: 00010246
Nov 19 21:39:16 localhost kernel: eax: cf8feb80 ebx: d483f37c ecx: cf352000 edx: 00000000
Nov 19 21:39:16 localhost kernel: esi: 6f732e78 edi: cf8feb20 ebp: cf352000 esp: cf421e54
Nov 19 21:39:16 localhost kernel: ds: 0018 es: 0018 ss: 0018
nov 19 21:39:16 localhost partmon: ^[[65G[^[[1;32m
Nov 19 21:39:16 localhost kernel: Process insmod (pid: 334, stackpage=cf421000)
Nov 19 21:39:16 localhost kernel: Stack: 00001000 c129e25c cffee800 d483f37c 00000000 cf8feb20 cf421ea4 d4825d88
Nov 19 21:39:16 localhost kernel: cf352000 00000000 00000000 00000000 cf352014 00000004 d483f360 00000000
Nov 19 21:39:16 localhost kernel: d4832de0 00000001 cf352000 d483c000 cf421ebc d48259a8 cf352000 00000000
Nov 19 21:39:16 localhost kernel: Call Trace: [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-2575492/96] [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-2679416/96] [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-2575520/96] [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-2626080/96] [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-2680408/96]
Nov 19 21:39:16 localhost kernel: Call Trace: [<d483f37c>] [<d4825d88>] [<d483f360>] [<d4832de0>] [<d48259a8>]
Nov 19 21:39:16 localhost kernel: [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-2680378/96] [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-2626072/96] [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-2682575/96] [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-2575520/96] [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-2682666/96] [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-2579158/96]
Nov 19 21:39:16 localhost kernel: [<d48259c6>] [<d4832de8>] [<d4825131>] [<d483f360>] [<d48250d6>] [<d483e52a>]
Nov 19 21:39:16 localhost kernel: [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-2575520/96] [sys_init_module+1288/1616] [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-2575736/96] [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-2575696/96] [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-2588576/96] [system_call+51/64]
Nov 19 21:39:16 localhost kernel: c011cc98>] [<d483f288>] [<d483f2b0>] [<d483c060>] [<c0108fe3>]
Nov 19 21:39:16 localhost kernel:
Nov 19 21:39:16 localhost kernel: Code: 83 7e 04 01 0f 85 22 03 00 00 50 6a 01 6a 00 68 80 ef 83 d4
Nov 19 21:39:16 localhost kernel: <6>usb.c: registered new driver acm
Nov 19 21:39:16 localhost kernel: SCSI subsystem driver Revision: 1.00
Nov 19 21:39:16 localhost kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Nov 19 21:39:16 localhost kernel: Vendor: LITE-ON Model: LTR-32123S Rev: XS0R
Nov 19 21:39:16 localhost kernel: Type: CD-ROM ANSI SCSI revision: 02
Nov 19 21:39:16 localhost kernel: hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Nov 19 21:39:16 localhost kernel: Uniform CD-ROM driver Revision: 3.12
Nov 19 21:39:16 localhost kernel: MSDOS FS: Using codepage 850
Nov 19 21:39:16 localhost kernel: MSDOS FS: IO charset iso8859-15
Nov 19 21:39:16 localhost kernel: CSLIP: code copyright 1989 Regents of the University of California
Nov 19 21:39:16 localhost kernel: PPP generic driver version 2.4.2
nov 19 21:39:16 localhost partmon:
nov 19 21:39:16 localhost rc: Avvio partmon: succeeded
Nov 19 21:39:16 localhost kernel: Installing knfsd (copyright (C) 1996 [email protected]).
nov 19 21:39:16 localhost nfslock: rpc.lockd avvio succeeded
Nov 19 21:39:16 localhost rpc.statd[781]: Version 1.0.1 Starting
nov 19 21:39:16 localhost nfslock: rpc.statd avvio succeeded
Nov 19 21:39:16 localhost gpm[796]: info: [gpn.c(363)]:
Nov 19 21:39:16 localhost gpm[796]: Started gpm successfully. Entered daemon mode.
Nov 19 21:39:17 localhost gpm[796]: info: [mice.c(1751)]:
Nov 19 21:39:17 localhost gpm[796]: imps2: Auto-detected intellimouse PS/2
nov 19 21:39:17 localhost gpm: gpm avvio succeeded
nov 19 21:39:17 localhost alsa: succeeded
Nov 19 21:39:18 localhost modprobe: modprobe: Can't locate module snd-card-1
Nov 19 21:39:18 localhost modprobe: modprobe: Can't locate module snd-card-2
Nov 19 21:39:18 localhost modprobe: modprobe: Can't locate module snd-card-3
Nov 19 21:39:18 localhost modprobe: modprobe: Can't locate module snd-card-4
Nov 19 21:39:18 localhost modprobe: modprobe: Can't locate module snd-card-5
Nov 19 21:39:18 localhost modprobe: modprobe: Can't locate module snd-card-6
Nov 19 21:39:18 localhost modprobe: modprobe: Can't locate module snd-card-7
Nov 19 22:39:00 localhost rc.sysinit: Setting default font (lat0-16): succeeded
Nov 19 22:39:01 localhost devfsd: Started device management daemon v1.3.25 for /dev
Nov 19 22:39:02 localhost devfsd: unknown group: video, defaulting to GID=0
Nov 19 22:39:04 localhost rc.sysinit: Running DevFs daemon succeeded
Nov 19 22:39:04 localhost rc.sysinit: Smonto initrd: succeeded
Nov 19 22:39:05 localhost rc.sysinit: Configuro i parametri del kernel: succeeded
Nov 19 21:39:06 localhost date: mer nov 19 21:39:06 CET 2003
Nov 19 21:39:06 localhost rc.sysinit: Setting clock (localtime): mer nov 19 21:39:06 CET 2003 succeeded
Nov 19 21:39:06 localhost rc.sysinit: Carico la tastiera predefinita succeeded
Nov 19 21:39:06 localhost rc.sysinit: Impostazione nome host localhost.localdomain: succeeded
Nov 19 21:39:06 localhost usb: Initializing USB controller (usb-uhci): succeeded
Nov 19 21:39:06 localhost usb: Mount del filesystem USB: succeeded
Nov 19 21:39:06 localhost fsck: /dev/hda5: clean, 103666/5128192 files, 583020/10255486 blocks
Nov 19 21:39:06 localhost rc.sysinit: Rimonto il filesystem radice in modalitÃ_ read-write: succeeded
Nov 19 21:39:06 localhost rc.sysinit: Attivo le partizioni di swap: succeeded
Nov 19 21:39:10 localhost /etc/hotplug/usb.agent: Setup slusb acm for USB product 483/7554/200
Nov 19 21:39:10 localhost /etc/hotplug/usb.agent: ... no modules for USB product 0/0/0
Nov 19 21:39:10 localhost /etc/hotplug/usb.agent: ... no modules for USB product 0/0/0
Nov 19 21:39:10 localhost insmod: Warning: loading /lib/modules/2.4.19-16mdk/misc/slmdm.o will taint the kernel: non-GPL license - Smart Link Ltd.
Nov 19 21:39:10 localhost insmod: Module slmdm loaded, with warnings
Nov 19 21:39:10 localhost modprobe: modprobe: insmod /lib/modules/2.4.19-16mdk/misc/slusb.o failed <27>Nov 19 21:39:10 modprobe: modprobe: insmod slusb failed
Nov 19 21:39:10 localhost /etc/hotplug/usb.agent: ... can't load module slusb
Nov 19 21:39:10 localhost /etc/hotplug/usb.agent: missing kernel or user mode driver slusb
nov 19 21:39:11 localhost rc.sysinit: Stabilisco le dipendenze dei moduli: succeeded
nov 19 21:39:11 localhost : Loading module: scsi_hostadapter
nov 19 21:39:12 localhost rc.sysinit: Monto i filesystem locali: succeeded
nov 19 21:39:12 localhost rc.sysinit: Monto i filesystem loopback: succeeded
Nov 19 21:39:12 localhost loadkeys: Loading /usr/lib/kbd/keymaps/i386/qwerty/it-latin1.kmap.gz
nov 19 21:39:12 localhost keytable: Carico mappa tasti: it-latin1 succeeded
Nov 19 21:39:12 localhost loadkeys: Loading /usr/lib/kbd/keymaps/include/compose.latin9.inc.gz
nov 19 21:39:12 localhost keytable: Avvio compose keys: compose.latin9.inc succeeded
nov 19 21:39:12 localhost keytable: succeeded
nov 19 21:39:13 localhost rc.sysinit: Abilito lo spazio di swap: succeeded
nov 19 21:39:14 localhost mandrake_everytime: Costruzione Sessioni del Window Manager succeeded
Nov 19 21:39:14 localhost modprobe: modprobe: Can't locate module eth1
Nov 19 21:39:14 localhost modprobe: modprobe: Can't locate module eth2
Nov 19 21:39:14 localhost modprobe: modprobe: Can't locate module eth3
Nov 19 21:39:14 localhost modprobe: modprobe: Can't locate module eth4
Nov 19 21:39:14 localhost modprobe: modprobe: Can't locate module eth5
Nov 19 21:39:14 localhost modprobe: modprobe: Can't locate module eth6
Nov 19 21:39:14 localhost modprobe: modprobe: Can't locate module eth7
Nov 19 21:39:14 localhost modprobe: modprobe: Can't locate module eth8
Nov 19 21:39:14 localhost modprobe: modprobe: Can't locate module eth9
Nov 19 21:39:14 localhost init: Entering runlevel: 5
nov 19 21:39:15 localhost network: Configuro i parametri di rete: succeeded
nov 19 21:39:15 localhost network: Bringing up loopback interface: succeeded
nov 19 21:39:15 localhost internet: Checking internet connections to start at boot succeeded
nov 19 21:39:15 localhost portmap: portmap avvio succeeded
nov 19 21:39:18 localhost aumix: vol set to 81, 81, P
nov 19 21:39:18 localhost aumix: bass set to 50, 50
nov 19 21:39:18 localhost aumix: treble set to 50, 50
nov 19 21:39:18 localhost aumix: pcm set to 81, 81
nov 19 21:39:18 localhost aumix: speaker set to 0, 0
nov 19 21:39:18 localhost aumix: line set to 0, 0, P
nov 19 21:39:18 localhost aumix: mic set to 0, 0, R
nov 19 21:39:18 localhost aumix: cd set to 81, 81, P
nov 19 21:39:18 localhost aumix: igain set to 0, 0
nov 19 21:39:18 localhost aumix: line1 set to 0, 0, P
nov 19 21:39:18 localhost aumix: phin set to 0, 0, P
nov 19 21:39:18 localhost aumix: video set to 0, 0, P
nov 19 21:39:18 localhost sound: Caricamento impostazioni mixer succeeded
nov 19 21:39:18 localhost random: Inizializzo il generatore di numeri casuali: succeeded
Nov 19 21:39:18 localhost xfs: listening on port -1
nov 19 21:39:18 localhost xfs: xfs avvio succeeded
Nov 19 21:39:19 localhost xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/drakfont (unreadable)
Nov 19 21:39:19 localhost xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/drakfont/Type1 (unreadable)
Nov 19 21:39:19 localhost xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/drakfont/ttf (unreadable)
nov 19 21:39:19 localhost netfs: Monto gli altri filesystem: succeeded
Nov 19 21:39:19 localhost apmd[1045]: Version 3.0.2 (APM BIOS 1.2, Linux driver 1.16)
nov 19 21:39:19 localhost apmd: apmd avvio succeeded
nov 19 21:39:19 localhost dm: Starting display manager:
nov 19 21:39:19 localhost dm: display manager startup succeeded
nov 19 21:39:19 localhost dm:
nov 19 21:39:19 localhost rc: Avvio dm: succeeded
Nov 19 21:39:19 localhost xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/pcf_drakfont:unscaled (unreadable)
nov 19 21:39:19 localhost atd: atd avvio succeeded
Nov 19 21:39:20 localhost kdm_config[1103]: Invalid option value 'All' at /usr/share/config/kdm/kdmrc:67
Nov 19 21:39:20 localhost apmd[1045]: Charge: * * * (-1% unknown)
Nov 19 21:39:21 localhost xinetd[1108]: xinetd Version 2.3.7 started with libwrap options compiled in.
Nov 19 21:39:21 localhost xinetd[1108]: Started working: 1 available service
Nov 19 21:39:23 localhost xinetd: xinetd startup succeeded
Nov 19 21:39:25 localhost kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Nov 19 21:39:25 localhost kernel: lp0: using parport0 (polling).
Nov 19 21:39:34 localhost kde3(pam_unix)[1109]: session opened for user mikymous by (uid=0)
Nov 19 21:39:34 localhost kernel: inserting floppy driver for 2.4.19-16mdk
Nov 19 21:39:34 localhost kernel: Floppy drive(s): fd0 is 1.44M
Nov 19 21:39:34 localhost kernel: FDC 0 is a post-1991 82077
Nov 19 21:39:34 localhost kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
Nov 19 21:39:34 localhost kernel: sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
nov 19 21:39:36 localhost gconfd (mikymous-1342): starting (version 1.2.1), pid 1342 user 'mikymous'
nov 19 21:39:36 localhost gconfd (mikymous-1342): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only config source at position 0
nov 19 21:39:36 localhost gconfd (mikymous-1342): Resolved address "xml:readwrite:/home/mikymous/.gconf" to a writable config source at position 1
nov 19 21:39:36 localhost gconfd (mikymous-1342): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only config source at position 2
Nov 19 21:39:38 localhost xinetd[1353]: warning: can't get client address: Transport endpoint is not connected
Nov 19 21:39:42 localhost kernel: cdrom: This disc doesn't have any tracks I recognize!
Nov 19 21:39:44 localhost kernel: cdrom: This disc doesn't have any tracks I recognize!
nov 19 21:39:51 localhost su(pam_unix)[1409]: session opened for user root by (uid=501)
Nov 19 21:41:43 localhost kernel: udf: registering filesystem
Nov 19 21:41:43 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 0
Nov 19 21:41:53 localhost last message repeated 9 times
Nov 19 21:42:14 localhost kernel: spurious 8259A interrupt: IRQ7.
nov 19 21:42:38 localhost gconfd (root-1455): starting (version 1.2.1), pid 1455 user 'root'
nov 19 21:42:38 localhost gconfd (root-1455): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only config source at position 0
nov 19 21:42:38 localhost gconfd (root-1455): Resolved address "xml:readwrite:/root/.gconf" to a writable config source at position 1
nov 19 21:42:38 localhost gconfd (root-1455): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only config source at position 2
nov 19 21:44:38 localhost gconfd (root-1455): GConf server is not in use, shutting down.
nov 19 21:44:38 localhost gconfd (root-1455): Exiting
nov 19 21:44:39 localhost gconfd (root-1465): starting (version 1.2.1), pid 1465 user 'root'
nov 19 21:44:39 localhost gconfd (root-1465): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only config source at position 0
nov 19 21:44:39 localhost gconfd (root-1465): Resolved address "xml:readwrite:/root/.gconf" to a writable config source at position 1
nov 19 21:44:39 localhost gconfd (root-1465): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only config source at position 2
Nov 19 21:45:44 localhost kernel: udf: bad mount option "codepage=850"
Nov 19 21:45:50 localhost kernel: Unable to identify CD-ROM format.
Nov 19 21:45:50 localhost kernel: MSDOS FS: Using codepage 850
Nov 19 21:45:50 localhost kernel: MSDOS FS: IO charset iso8859-15
Nov 19 21:45:51 localhost fam[1353]: File "floppy" changed between express and stat
Nov 19 21:45:51 localhost kernel: udf: bad mount option "codepage=850"
Nov 19 21:45:56 localhost fam[1353]: File "cdrom" changed between express and stat
Nov 19 21:45:56 localhost kernel: cdrom: open failed.
Nov 19 21:45:56 localhost last message repeated 4 times
nov 19 21:48:39 localhost gconfd (root-1465): GConf server is not in use, shutting down.
nov 19 21:48:39 localhost gconfd (root-1465): Exiting
Nov 19 21:49:13 localhost pppd[1542]: In file /etc/ppp/options: unrecognized option 'ock'
Nov 19 21:49:38 localhost kernel: Unable to handle kernel paging request at virtual address fffffffc
Nov 19 21:49:38 localhost kernel: printing eip:
Nov 19 21:49:38 localhost kernel: c0119180
Nov 19 21:49:38 localhost kernel: *pde = 00041063
Nov 19 21:49:38 localhost kernel: *pte = 00000000
Nov 19 21:49:38 localhost kernel: Oops: 0000
Nov 19 21:49:38 localhost kernel: CPU: 0
Nov 19 21:49:38 localhost kernel: EIP: 0010:[__wake_up+32/96] Tainted: P
Nov 19 21:49:38 localhost kernel: EIP: 0010:[<c0119180>] Tainted: P
Nov 19 21:49:38 localhost kernel: EFLAGS: 00210017
Nov 19 21:49:38 localhost kernel: eax: d4a56da4 ebx: 00000000 ecx: 00000001 edx: 00000001
Nov 19 21:49:38 localhost kernel: esi: d4a56da4 edi: 00000001 ebp: c80ede10 esp: c80eddfc
Nov 19 21:49:38 localhost kernel: ds: 0018 es: 0018 ss: 0018
Nov 19 21:49:38 localhost kernel: Process kppp (pid: 1528, stackpage=c80ed000)
Nov 19 21:49:38 localhost kernel: Stack: 00000001 00200282 d4a56d80 ce105000 00000000 c80edeb0 d49fd0fc ce105000
Nov 19 21:49:38 localhost kernel: c81fd340 ce105000 c80edeb0 c0174a55 ce105000 c81fd340 c0174f40 ce105000
Nov 19 21:49:38 localhost kernel: c81fd340 d496085c 00000000 00000013 00000000 00200212 c025f67c d4a56d80
Nov 19 21:49:38 localhost kernel: Call Trace: [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-381568/96] [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-749316/96] [release_dev+117/1456] [release_dev+1376/1456] [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-1390500/96]
Nov 19 21:49:38 localhost kernel: Call Trace: [<d4a56d80>] [<d49fd0fc>] [<c0174a55>] [<c0174f40>] [<d496085c>]
Nov 19 21:49:38 localhost kernel: [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-381568/96] [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-381568/96] [ppp_async:__insmod_ppp_async_O/lib/modules/2.4.19-16mdk/kernel/driver+-749647/96] [tty_open+288/960] [devfs_d_delete+52/240] [dput+227/272]
Nov 19 21:49:38 localhost kernel: [<d4a56d80>] [<d4a56d80>] [<d49fcfb1>] [<c01750b0>] [<c016c6b4>] [<c014bcf3>]
Nov 19 21:49:38 localhost kernel: [chrdev_open+68/80] [devfs_open+347/416] [dentry_open+201/464] [filp_open+81/96] [sys_open+61/144] [system_call+51/64]
Nov 19 21:49:38 localhost kernel: [<c013a964>] [<c016c5bb>] [<c0139389>] [<c01392b1>] [<c013962d>] [<c0108fe3>]
Nov 19 21:49:38 localhost kernel:
Nov 19 21:49:38 localhost kernel: Code: 8b 53 fc 8b 02 85 c7 75 17 8b 1b 39 f3 75 f1 ff 75 f0 9d 8d
Nov 19 21:49:55 localhost pppd[1591]: In file /etc/ppp/options: unrecognized option 'ock'
nov 19 21:51:28 localhost su(pam_unix)[1628]: session opened for user root by (uid=501)
nov 19 21:51:43 localhost gconfd (root-1663): starting (version 1.2.1), pid 1663 user 'root'
nov 19 21:51:43 localhost gconfd (root-1663): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only config source at position 0
nov 19 21:51:43 localhost gconfd (root-1663): Resolved address "xml:readwrite:/root/.gconf" to a writable config source at position 1
nov 19 21:51:43 localhost gconfd (root-1663): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only config source at position 2

[ilsensine]

Eh già. Hai un bel pò di kernel oops. Non ti possiamo aiutare molto su quelli, in quanto stai usando driver closed source.

[Drunk Horse]

Originariamente inviato da Miky Mouse
niente........ comunque il "ln -s" non è servito a nulla perche' continua a darmi sempre i soliti errori: se unso /dev/modem rimane su "ricerca modem........" se uso /dev/ttySL0 mi dice "spiacente il modem non risponde".
[/B]

facci vedere un ls -l | grep modem nella directory /dev

poi non riconosce il comando ppp-on. tutti i file che dovevo modificare/editare mi ho modificati/editati.


E' strano che tu non abbia ppp-on (ilsensine...aiuto)....
Suppongo che tu sti facendo il tutto da root??


ecco il maledetto file messages (ho preso solo la parte che riguarda oggi).... ma anche se sono un novellino mi pare che sia pieno di errori.... :(

Nov 19 21:49:13 localhost pppd[1542]: In file /etc/ppp/options: unrecognized option 'ock'


Hai fatto un errore nella prima linea di /etc/ppp/options ( lock )

I driver purtroppo non sono Open Source ma sono gli unici che conosca per prodotti SmartLink o derivati (parlo del mio modem)!

Sinceramente non so' perche non hai il comando ppp-on (ndr. se non sei root non lo vedi a meno di suid)...pensavo fosse uno script gia' compreso in ppp....

[ilsensine]

Originariamente inviato da Drunk Horse
E' strano che tu non abbia ppp-on (ilsensine...aiuto)....

Mai sentito parlare di ppp-on, forse è uno script specifico per qualche distribuzione.

Cmq se ci sono kernel oops di mezzo per me non possiamo fare molto, solo il produttore del driver può farci qualcosa (lui ha i nostri sorgenti, noi non abbiamo i suoi)

[Drunk Horse]

Originariamente inviato da ilsensine
Mai sentito parlare di ppp-on, forse è uno script specifico per qualche distribuzione.


Io uso Slackware...
Cmq pensavo che fossero compresi in ppp perche' ho letto qui: http://en.tldp.org/HOWTO/PPP-HOWTO/automate.html
...purtroppo sono riuscito far andare solo da poco il mio modem non sono un esperto di ppp...
Da me' questi driver funzionano....

Saluti

[Miky Mouse]

:cry: mi sa che la mia esperienza linux finisce qui....

[Drunk Horse]

Originariamente inviato da Miky Mouse
:cry: mi sa che la mia esperienza linux finisce qui....


Non è il caso di essere così drastici...soprattutto a causa di un winmodem...
Con tutta la roba che hai in sign ti ritrovi solo sto scatramato modem....

[lovaz]

Non puoi procurarti un modem esterno seriale? Non avresti più problemi ;)

[Miky Mouse]

magari avere un altro modem....... ma porca miseria possibile che esistono i driver e non funziona?????

[Miky Mouse]

non ci posso credere!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
sono collegato da linux!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

non ce ne siamo accorti era un errore stupidissimo!!!!!!!!!!!!!

lui giustamente cercava il modem su ttySL0 e diceva che non rispondeva! aveva ragione! il modem è USB! quindi è collegato alla com3!! quindi il dispositivo è ttySL3!

finalmente dopo giorni e giorni di smanettamento sono collegato!!!!!!

grazie a tutti ragazzi cmq siete sempre mitici!!

[Drunk Horse]

Originariamente inviato da Miky Mouse
non ci posso credere!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
sono collegato da linux!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


Sono contento per tè!!
Molto meglio così!!
Ora leggiti qualcosa su iptables :D
Saluti

[Miky Mouse]

stò cercando in giro qualcosa sul firewall..... se non capisco chiedo qui...