PDA

View Full Version : Problema 1° cd masterizzato con PX708A


GARRY77
27-10-2003, 22:31
Ragazzi ho provato a masterizzare un dvd dati con un cdv +r .....alla fine della masterizzazione mi ha bruciato il 1° cd..
Allego Log...aiutatemi a capire cosa e' successo.

Grazie a tutti.

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12.06.00
ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 15.25.04
Nero version: 6.0.0.19
Recorder: <PLEXTOR DVDR PX-708A> Version: 1.02 - HA 3 TA 1 - 6.0.0.19
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Image Simulation >Version: 1.0g - HA 0 TA 0 - 6.0.0.19
Adapter driver: <PrecSim> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : Image Simulation 1.0g PrecSim Port 0 ID 0 DMA: Off
CdRomPeripheral : ELBY DVD-ROM 1.0 ElbyVCD Port 1 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120L0 atapi Port 2 ID 0 DMA: On
DiskPeripheral : IC35L080AVVA07-0 atapi Port 2 ID 1 DMA: On
CdRomPeripheral : LG DVD-ROM DRD8160B atapi Port 3 ID 0 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-708A atapi Port 3 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a axsaki Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
Image Simulation I: CDRom3
ELBY DVD-ROM G: CDRom2
LG DVD-ROM DRD8160B E: CDRom0
PLEXTOR DVDR PX-708A F: CDRom6
AXV CD/DVD-ROM H: CDRom4
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 604MB (619120kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.10.2003
ISO compilation
23.09.53 #1 Text 0 File Isodoc.cpp, Line 5950
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

23.09.53 #2 Text 0 File Reader.cpp, Line 118
Reader running

23.09.53 #3 Text 0 File Writer.cpp, Line 127
Writer PLEXTOR DVDR PX-708A running

23.09.53 #4 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

23.09.53 #5 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media

23.09.53 #6 Text 0 File DlgWaitCD.cpp, Line 230
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2271919 (504:52.19)

23.09.53 #7 Text 0 File DlgWaitCD.cpp, Line 235
Write in overburning mode: FALSE

23.09.53 #8 Text 0 File DlgWaitCD.cpp, Line 1949
Recorder: PLEXTOR DVDR PX-708A, Media type: DVD+R

23.09.53 #9 Text 0 File DlgWaitCD.cpp, Line 394
>>> Protocol of DlgWaitCD activities: <<<
=========================================

23.09.53 #10 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2271920 (2271920) = #2271920/504:52.20
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2271920 blocks [PLEXTOR DVDR PX-708A ]
--------------------------------------------------------------

23.09.53 #11 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [PLEXTOR DVDR PX-708A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4653199360, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2271920 | lead-out | 1 | 0x00 | 0x41

23.09.53 #12 Phase 24 File dlgbrnst.cpp, Line 1843
Caching of files started

23.09.54 #13 Phase 25 File dlgbrnst.cpp, Line 1843
Caching of files completed

23.09.54 #14 Phase 36 File dlgbrnst.cpp, Line 1843
Burn process started at 8x (11.040 KB/s)

23.09.54 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

23.09.54 #16 SCSI -1066 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 3, TA 1, LUN 0, buffer 0x03CD5000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

23.09.54 #17 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 7:10,307 (430307ms) -> OK

23.09.54 #18 Text 0 File DVDPlusRW.cpp, Line 564
Start write address at LBA 0
DVD high compatibility mode: Yes

23.22.06 #19 Text 0 File WriterStatus.cpp, Line 113
<PLEXTOR DVDR PX-708A > start writing Lead-Out at LBA 2271920 (22AAB0h), lenght 0 blocks

23.22.06 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

23.22.09 #21 SCSI -1066 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 3, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

23.22.09 #22 SCSI -1066 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 3, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

23.22.09 #23 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

23.22.09 #24 CDR -1066 File ThreadedTransferInterface.cpp, Line 1626
Invalid field in command

23.22.09 #25 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1626
Could not perform end of Disc-at-once

23.22.09 #26 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

23.22.09 #27 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

23.22.09 #28 Phase 38 File dlgbrnst.cpp, Line 1843
Burn process failed at 8x (11.040 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 14/08/2002 15.03.36
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 10/06/2003 0.00.00
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 10.27.50 (Adapter driver for rec)
File 'Drivers\precsim.sys': Ver=1.16.0.0, size=69600 bytes, created 22/05/2002 0.00.00 (Adapter driver for src)

Registry Keys:
HKLM\Software\CPUCooL (Power saving: CPUCooL)
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Mistral PaolinuX
27-10-2003, 23:31
Ciao !

Non è che stavi facendo il CD in overburning ? Nero6 fa un po' a pugni con l'OB.

Paolo

GARRY77
28-10-2003, 07:35
No, perche' la barra non e' arrivato al colore rosso..e poi teoricamente dovrebbe chiederlo prima di iniziare la scrittura.....

potrebbe essere un problema di supporto???
perche' la simulazione rimane griggia non flaggabile?

Grazie a tutti.

GARRY77
28-10-2003, 12:52
up

MM
28-10-2003, 13:56
Potrebbe essere un problema di supporto, prova a cambiarlo

Mistral PaolinuX
28-10-2003, 23:13
Ciao !

Oppure un problema di ASPI.

Salutoni a MM :D

Paolo

garfo
29-10-2003, 15:51
Versione del firmware ?
Aggiornalo alla 1.03 se non lo hai già fatto.

GARRY77
29-10-2003, 16:58
ho fatto copie a 2 x e alcune a 4x e funziona......forse e' solo un problema di supporto...quali sono i migliori in assoluto come durata nel tempo e compatibilita' con il suddetto masterizzatore...

Mistral PaolinuX
29-10-2003, 22:25
Ciao !

Guarda, è difficile dire quali siano i supporti migliori per ciascun dev. Ci sono moltissimi parametri da considerare. Però nel thread in rilievo sui CD (segnalato anche nella mia sign) c'è un link ad un thread proprio sui supporti. Ti cosiglio di dare una guardata lì.

Paolo

garfo
29-10-2003, 23:11
www.dvdrhelp.com

sezione dvdr media