paperink
26-10-2003, 10:10
Ciao a tutti, io ho un vecchio celeron 466 con scheda madre QDI Brilliant I (lo so dovrei evolmermi ad una macchina superiore )e vorrei aumentare la ram. Il manuale della scheda madre recita:
The P6I440BX/B1 Brilliant-I main board supports up to three 168PIN 3.3V
un-buffered 100MHz/66MHz DIMM, provides a flexible size from 8MB up to
384MB SDRAM memory. The following set of rules allows for optimum
configurations.
Rules for populating a 440BX memory array:
, DIMM sockets can be populated in any order.
, Using the serial presence detect (SPD) data structure, programmed into
an E2PROM on the DIMM, the BIOS can determine the SDRAM'S size
and speed.
, The DRAM Timing register, which provides the DRAM speed grade
control for the entire memory array, must be programmed to use the
timings of the slowest DRAMs installed.
, Pentium® II processors with 100MHz bus speed should be paired only
with 100MHz SDRAM.
, Possible SDRAM memory size is 8MB, 16MB, 32MB, 64MB, 128MB
in each DIMM socket.
Mi aiutereste a interpretare??
Ad esempio vuole dire che posso montare solo dimm 100MHz o 66MHZ oppure anche superiori?
Una banco di memoria con queste caratteristiche:
- Banco di memoria sdram dimm 256 mb pc 133 no parità
funzionerebbe??
Grazie a tutti in anticipo!
ciaooo
:D :D
The P6I440BX/B1 Brilliant-I main board supports up to three 168PIN 3.3V
un-buffered 100MHz/66MHz DIMM, provides a flexible size from 8MB up to
384MB SDRAM memory. The following set of rules allows for optimum
configurations.
Rules for populating a 440BX memory array:
, DIMM sockets can be populated in any order.
, Using the serial presence detect (SPD) data structure, programmed into
an E2PROM on the DIMM, the BIOS can determine the SDRAM'S size
and speed.
, The DRAM Timing register, which provides the DRAM speed grade
control for the entire memory array, must be programmed to use the
timings of the slowest DRAMs installed.
, Pentium® II processors with 100MHz bus speed should be paired only
with 100MHz SDRAM.
, Possible SDRAM memory size is 8MB, 16MB, 32MB, 64MB, 128MB
in each DIMM socket.
Mi aiutereste a interpretare??
Ad esempio vuole dire che posso montare solo dimm 100MHz o 66MHZ oppure anche superiori?
Una banco di memoria con queste caratteristiche:
- Banco di memoria sdram dimm 256 mb pc 133 no parità
funzionerebbe??
Grazie a tutti in anticipo!
ciaooo
:D :D