PDA

View Full Version : Masterizzatore Pioneer DVR-A105 CAPRICCIOSO


lucios
08-10-2003, 11:24
Ciao a tutti: ho qualche problema con il mio Pioneer 105, arriva al 100 % e mi da masterizzazione fallita. I file ovviamente rientrano nella capacità (certi anche da 3 gb).
Uso nero 6, poi ho anche provato a reistallare la versione 55.10.20, ma niente. Ho provato anche con dischi di diversa marca, anche se prima non avevo mai riscontrato problemi. Sul sito della Pioneer, ho trovato anche un aggiornamento firmware (il mio masterizzatore ha quasi un anno), che dite, oggiorno?

Ciao.

lucios
08-10-2003, 14:40
???:confused: :confused: ???

sslazio
08-10-2003, 16:15
aggiorna sicuramente.
Comunque un buon formattone ogni tanto fa tanto ma tanto bene al sistema.

lucios
08-10-2003, 16:20
Ciao, grazie, comunque non tanto che ho formattato.
Adesso provo ad aggiornare.

Ciao

alexander.f
08-10-2003, 17:18
Originariamente inviato da lucios
Ciao, grazie, comunque non tanto che ho formattato.
Adesso provo ad aggiornare.

Ciao

ma il masterizzatore prima andava da bene??

ciao

lucios
08-10-2003, 21:30
si, ma ogni tanto si impuntava quando doveva scrivere con velocità diversa da 1x (ovviamente usando dishi 2x, 4x).

Ciao.

lucios
11-10-2003, 19:22
Allora, ho cambiato il firmware mettendo il 133 scaricato dal sito Pioneer, ho riprovato a masterizzare a 4x (con un disco dvd-r LG 4x), ma la cosa non cambia: arriva al 100% (con Nero 5.5.10.20, ma stessa cosa anche con Nero 6) e in operazioni di leed out, dice che trova problemi DAO. Ho allegato anche il log salvato a fine masterizzazione, se qualcuno di voi più ferrato in materia, può trovarci qualche buon indizio......

ciao e GRAZIE.

LUCIOS.


-----------------------------------------
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 22.37.36
Nero Version: 5.5.10.20
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 0 - 5.5.10.20
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VOBID InstantDrive CD>Version: 14 - HA 2 TA 0 - 5.5.10.20
Adapter driver: <VOBID> HA 2
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380021A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PHILIPS CDRWDVD3210 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 2 ID 0 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1535MB (1572384kB)
Free physical memory: 1146MB (1173904kB)
Memory in use : 25 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

11.10.2003
Compilation UDF/ISO
19.47.32 #1 Phase 112 File dlgbrnst.cpp, Line 1655
DVD-Video files reallocation started

19.47.32 #2 Phase 114 File dlgbrnst.cpp, Line 1655
DVD-Video files reallocation completed (no file modified)

19.47.32 #3 Text 0 File Isodoc.cpp, Line 7579
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

19.47.32 #4 Phase 111 File dlgbrnst.cpp, Line 1655
DVD-Video files sorted

19.47.32 #5 Text 0 File Reader.cpp, Line 115
Reader running

19.47.32 #6 Text 0 File Writer.cpp, Line 125
Writer PIONEER DVD-RW DVR-105 running

19.47.32 #7 ISO9660GEN -11 File geniso.cpp, Line 4563
First writeable address = 0 (0x00000000)

19.47.32 #8 ISO9660GEN -11 File geniso.cpp, Line 4563
First writeable address = 0 (0x00000000)

19.47.32 #9 Text 0 File Burncd.cpp, Line 3726
Turn on Disc-At-Once, using DVD media

19.47.32 #10 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2181552 (2181552) = #2181552/484:47.27
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

19.47.33 #11 Text 0 File DlgWaitCD.cpp, Line 215
Last possible write address on media: 2298495 (510:48.45)
Last address to be written: 2181551 (484:49.26)

19.47.33 #12 Text 0 File DlgWaitCD.cpp, Line 220
Write in overburning mode: FALSE

19.47.33 #13 Text 0 File DlgWaitCD.cpp, Line 1657
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: LGE04 -
Disc Application Code: 64, Disc Physical Code: 193

19.47.36 #14 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder PIONEER DVD-RW DVR-105 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 173158400

19.47.36 #15 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2181552 (2181552) = #2181552/484:47.27
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2181552 blocks [PIONEER DVD-RW DVR-105 ]
--------------------------------------------------------------

19.47.36 #16 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started

19.47.36 #17 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed

19.47.36 #18 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 4x (5.520 KB/s)

19.47.36 #19 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

19.47.36 #20 Text 0 File DVDR.cpp, Line 1364
Recording mode: Sequential Recording Mode

19.47.36 #21 Text 0 File Mmc.cpp, Line 17693
Set BUFE: supported -> ON

19.47.36 #22 Text 0 File DVDR.cpp, Line 1478
Start write address at LBA 0
DVD high compatibility mode: Yes

19.47.36 #23 Text 0 File Cdrdrv.cpp, Line 7863
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

19.47.41 #24 Text 0 File Writer.cpp, Line 316
19:47:41.703 - PIONEER DVD-RW DVR-105 : Queue again later (Intervall : 11msec)

20.01.26 #25 Text 0 File WriterStatus.cpp, Line 115
<PIONEER DVD-RW DVR-105 > start writing Lead-Out at LBA 2181552 (2149B0h), lenght 0 blocks

20.01.26 #26 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

20.01.26 #27 SCSI -1064 File Cdrdrv.cpp, Line 1412
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02029000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x21 0x49 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x21 0x02

20.01.26 #28 SCSI -1064 File Cdrdrv.cpp, Line 1412
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02029000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x21 0x49 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x21 0x02

20.01.30 #29 CDR -1064 File ThreadedTransferInterface.cpp, Line 1468
Invalid block address

20.01.30 #30 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1468
Could not perform end of Disc-At-Once

20.01.30 #31 CDR -201 File WriterStatus.cpp, Line 163
Invalid write state

20.01.30 #32 TRANSFER -24 File WriterStatus.cpp, Line 163
Could not perform end of Disc-At-Once

20.01.30 #33 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 4x (5.520 KB/s)

20.01.30 #34 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 1.27.50 (Adapter driver for rec)
File 'Drivers\vobid.sys': Ver=1, 1, 0, 15, size=26679 bytes, created 20/02/2003 11.42.44 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

------------------------------------------

lucios
11-10-2003, 22:28
ulteriore prova fatta a 2x con supporto 2x.......stesso problema :mad: :mad: :mad: :mad: :mad: :muro:

lucios
12-10-2003, 13:04
aiuto ! ! ! :D

Tranqui
12-10-2003, 14:17
Ho il tuo stesso masterizzatore.
Mai avuti questi problemi con Nero, ne con il firmware vecchio ne con quello nuovo.

Io farei così:
Prova ad utilizzare un altro software di masterizzazione === se non va ===> prova il pioneer su un altro sistema === se non va ===> rispedisci il pioneer in garanzia ;)

lucios
12-10-2003, 15:51
Ciao:

ok, farò anche questi tentativi, ma credo che veramente avrà qualche problema il masterizzatore.....