Mi è morto l'LG 8160B ?? [Archivio] - Hardware Upgrade Forum

rizzi

27-09-2003, 19:53

Mi brucia cd a ripetizione sempre per "could not perform endtrack" "write error" ecc ecc a 4x 8x 12x 16x.

Non so + che fare !!

Nero 60015 con patch e win xp....

Il log di Nero:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10.03.20
ahead WinASPI: File 'C:\Programmi\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 15.25.04
Nero version: 6.0.0.15
Recorder: <HL-DT-ST CD-RW GCE-8160B>Version: 2.01 - HA 1 TA 0 - 6.0.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST CD-ROM GCR-8523B>Version: 1.00 - HA 1 TA 1 - 6.0.0.15
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST340810A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8523B atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8160B E: CDRom0
HL-DT-ST CD-ROM GCR-8523 F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 312MB (319584kB)
Memory in use : 38 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.9.2003
CD-ROM (ISO)
19.39.50 #1 Text 0 File Isodoc.cpp, Line 5878
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

19.39.50 #2 Phase 90 File dlgbrnst.cpp, Line 1843
Buffer Underrun Protection activated

19.39.50 #3 Text 0 File Reader.cpp, Line 118
Reader running

19.39.50 #4 Text 0 File Writer.cpp, Line 127
Writer HL-DT-ST CD-RW GCE-8160B running

19.39.50 #5 ISO9660GEN -11 File geniso.cpp, Line 3861
First writeable address = 0 (0x00000000)

19.39.50 #6 Text 0 File Burncd.cpp, Line 3169
Turn on Disc-at-once, using CD-R/RW media

19.39.52 #7 Text 0 File DlgWaitCD.cpp, Line 230
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 343324 (76:19.49)

19.39.52 #8 Text 0 File DlgWaitCD.cpp, Line 235
Write in overburning mode: FALSE

19.39.52 #9 Text 0 File DlgWaitCD.cpp, Line 1878
Recorder: HL-DT-ST CD-RW GCE-8160B;
CDR code: 00 97 15 05; OSJ entry from: TDK Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 0F 05 (LI 97:15.05), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

19.39.52 #10 Text 0 File DlgWaitCD.cpp, Line 393
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19.39.52 #11 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 343325 (343325) = #343325/76:17.50
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 343325 blocks [HL-DT-ST CD-RW GCE-8160B ]
--------------------------------------------------------------

19.39.52 #12 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [HL-DT-ST CD-RW GCE-8160B ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 703436800, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
343325 | lead-out | 1 | 0x00 | 0x41

19.39.52 #13 Phase 24 File dlgbrnst.cpp, Line 1843
Caching of files started

19.39.52 #14 Phase 25 File dlgbrnst.cpp, Line 1843
Caching of files completed

19.39.52 #15 Phase 36 File dlgbrnst.cpp, Line 1843
Burn process started at 4x (600 KB/s)

19.39.52 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19.39.52 #17 Text 0 File Mmc.cpp, Line 14512
StartDAO : CD-Text - Off

19.39.52 #18 Text 0 File Mmc.cpp, Line 19000
Set BUFE: supported -> ON

19.39.52 #19 Text 0 File Mmc.cpp, Line 14832
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4c 13 32

19.42.56 #20 SCSI -1135 File Cdrdrv.cpp, Line 1411
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03DD0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x3D 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

19.42.56 #21 CDR -1135 File Writer.cpp, Line 335
Write error

19.42.56 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

19.42.57 #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

19.44.06 #24 SCSI -1033 File Cdrdrv.cpp, Line 1203
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x09
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x09

19.50.07 #25 SCSI -1169 File Cdrdrv.cpp, Line 1203
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08

19.50.12 #26 SCSI -1033 File Cdrdrv.cpp, Line 1203
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0012ACA0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x09
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x09
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x41 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x

19.50.16 #27 SCSI -1033 File Cdrdrv.cpp, Line 1203
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0012ABE4
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x09
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x09
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x

19.50.22 #28 SCSI -1033 File Cdrdrv.cpp, Line 1203
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0012ABE4
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x09
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x09
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x

19.50.29 #29 SCSI -1033 File Cdrdrv.cpp, Line 1203
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0012ABE4
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x09
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x09
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x

19.50.30 #30 SCSI -1033 File Cdrdrv.cpp, Line 1203
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0012ABE4
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x09
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x09
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x

19.50.30 #31 CDR -1169 File WriterStatus.cpp, Line 162
Logical unit not ready, operation in progress
HL-DT-ST CD-RW GCE-8160B\H1 T0

19.50.30 #32 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

19.50.30 #33 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

19.50.36 #34 Phase 38 File dlgbrnst.cpp, Line 1843
Burn process failed at 4x (600 KB/s)

19.50.46 #35 SCSI -1169 File Cdrdrv.cpp, Line 1203
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 9.05.10
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 1.27.50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

rizzi

27-09-2003, 19:54

Aggiungo che sepsso mi porta a termine il burn a 4x ma poi nel cd non c'è niente.....BOH ?

Che masterizzatore nuovo mi consigliate ?

:)

MM

27-09-2003, 22:16

Ma secondo te, chi ha letto questo intervento?
...magari comprese le stringhe in esadecimale? ;)

rizzi

27-09-2003, 23:31

We bello, mica sono il primo che posta i logs di nero per farsi risolvere un problema ?

Allora che esiste a fare sto forum.

:rolleyes:

Questa è la parte incriminata:

19.50.30 #31 CDR -1169 File WriterStatus.cpp, Line 162
Logical unit not ready, operation in progress
HL-DT-ST CD-RW GCE-8160B\H1 T0

19.50.30 #32 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

19.50.30 #33 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

19.50.36 #34 Phase 38 File dlgbrnst.cpp, Line 1843
Burn process failed at 4x (600 KB/s)

marben

28-09-2003, 13:42

Calmo, MM non voleva dire niente contro di te.

Piuttosto, il problema si è verificato in concomitanza col passaggio a Nero 6? E' risaputo che Nero 6, poichè ancora immaturo, talvolta ha dei comportamenti imprevedibili (ovvero dicasi Bug). Prova a reinstallare la 5.5. O, comunque, prova con il software in bundle con il device. Escluderei che l'aggiornamento firmware possa essere risolutivo, ma si potrebbe tentare. Verifica che il layer ASPI sia installato correttamente. Quindi prova a reinstallare il driver del chipset e del controller IDE. Infine, puoi tentare ad aprire il device per praticare un'accurata pulizia.

In ogni caso, all'insorgere di tali problemi, è sempre bene consultare il thread in rilevo, che contiene spiegazioni e tips per risolvere vari problemi.