Holliwood[ita]
31-08-2003, 14:11
se passo da una mobo con fsb 100 a una con fsb 133(533) succede che il mio pentium 4 a 1.6Ghz diventa a 2ghz e che rimango nelle specifiche per i bus pci e agp.
Volevo dunque sapere quale mobo è consigliata per questo overclock.
a seguito tutti i dati del mio pc:
Code Name Willamette
Specification Intel(R) Pentium(R) 4 CPU 1.60GHz
Family / Model / Stepping F 1 2
Extended Family / Model 0 0
Brand ID 8
Technology 0.18 µ
Supported Instructions Sets MMX, SSE, SSE2
CPU Clock Speed 1792.2 MHz
Clock multiplier x 16.0
Front Side Bus Frequency 112.0 MHz
Bus Speed 448.0 MHz
L1 Data Cache 8 KBytes, 4-way set associative, 64 Bytes line size
L1 Trace Cache 12 Kµops, 8-way set associative
L2 Cache 256 KBytes, 8-way set associative, 64 Bytes line size
L2 Speed 1792.2 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 256 bits
Mainboard and chipset tyan s2266 trinity 510
Chipset VIA P4X266 (VT8753) rev. 1
Southbridge VIA VT8233 rev. 0
Sensor chip Winbond W83697HF
AGP Status enabled, rev. 2.0
AGP Data Transfert Rate 4x
AGP Side Band Addressing supported, not enabled
AGP Aperture Size 128 MBytes
Memory
DRAM Type DDR-SDRAM
DRAM Size 512 MBytes
DRAM Frequency 112.0 MHz
FSB:DRAM 1:1
DRAM Interleave 4-way
CAS# Latency 2.0 clocks
RAS# to CAS# 2 clocks
RAS# Precharge 2 clocks
Cycle Time (TRAS) 5 clocks
# of memory modules 2
Module 0 Samsung DDR-SDRAM PC2100 - 256 MBytes
Module 1 SpecTek Incorporated DDR-SDRAM PC2100 - 256 MBytes
che problemi potrei incontrare con la RAM? io ho 2 banchi da 256 PC2100... che vorrei mantenere. reggerebbero il nuovo FSB a 533??
per quanto riguarda il raffreddamento ho la vetola boxed sul processore e una coolermaster sull'hd.
Dovrei immagino cambiare quella sul processore con una che raffreddi molto meglio.
Quale sono le migliori?
grazie
GIGI:confused: :confused:
Volevo dunque sapere quale mobo è consigliata per questo overclock.
a seguito tutti i dati del mio pc:
Code Name Willamette
Specification Intel(R) Pentium(R) 4 CPU 1.60GHz
Family / Model / Stepping F 1 2
Extended Family / Model 0 0
Brand ID 8
Technology 0.18 µ
Supported Instructions Sets MMX, SSE, SSE2
CPU Clock Speed 1792.2 MHz
Clock multiplier x 16.0
Front Side Bus Frequency 112.0 MHz
Bus Speed 448.0 MHz
L1 Data Cache 8 KBytes, 4-way set associative, 64 Bytes line size
L1 Trace Cache 12 Kµops, 8-way set associative
L2 Cache 256 KBytes, 8-way set associative, 64 Bytes line size
L2 Speed 1792.2 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 256 bits
Mainboard and chipset tyan s2266 trinity 510
Chipset VIA P4X266 (VT8753) rev. 1
Southbridge VIA VT8233 rev. 0
Sensor chip Winbond W83697HF
AGP Status enabled, rev. 2.0
AGP Data Transfert Rate 4x
AGP Side Band Addressing supported, not enabled
AGP Aperture Size 128 MBytes
Memory
DRAM Type DDR-SDRAM
DRAM Size 512 MBytes
DRAM Frequency 112.0 MHz
FSB:DRAM 1:1
DRAM Interleave 4-way
CAS# Latency 2.0 clocks
RAS# to CAS# 2 clocks
RAS# Precharge 2 clocks
Cycle Time (TRAS) 5 clocks
# of memory modules 2
Module 0 Samsung DDR-SDRAM PC2100 - 256 MBytes
Module 1 SpecTek Incorporated DDR-SDRAM PC2100 - 256 MBytes
che problemi potrei incontrare con la RAM? io ho 2 banchi da 256 PC2100... che vorrei mantenere. reggerebbero il nuovo FSB a 533??
per quanto riguarda il raffreddamento ho la vetola boxed sul processore e una coolermaster sull'hd.
Dovrei immagino cambiare quella sul processore con una che raffreddi molto meglio.
Quale sono le migliori?
grazie
GIGI:confused: :confused: