PDA

View Full Version : eci-adsl MDK9.1 USB Ericsson hm220dp

nix.nix
29-08-2003, 20:27
Premetto che l'Ericsson hm220dp ufficialmente non è supportato dai driver eci, ma da quanto ho capito ha lo stesso chip del Ericsson hm120dp che invece è supporato ma a differenza del del 220 il 120 è esclusivamente usb.

Ho installato gli ultimi Eci 08 ho configurato come da manuale dns provider che è Virgilio il VIP e rimosso usbdub, non ostante ciò non ho capito qualcosa su i binari ho visto che il mio è lo 01 da me creato.

Dal lspci -nv vedo che:

usb-uhci e caricato

ma manca il modulo per HUSB UHCI Root Hub che non so cosa sia.

e che il modem viene riconosciuto come Ericsson hm220dp ma manca il modulo

e startmodem si ferma alla fase 2

Qualche idea ???:confused: :rolleyes: :(
nix.nix
29-08-2003, 22:17
Cosa ne pensate ?
sono normali questi "unknown" ?

unknown : VIA Technologies|VT82C598 [Apollo MVP3 AGP]
unknown : VIA Technologies|VT82C596 ISA [Apollo PRO]
unknown : VIA Technologies|VT82C586 IDE [Apollo]
unknown : VIA Technologies Inc|Power Management
usb-uhci : VIA Technologies|VT82C586B USB
unknown : Unknown|USB UHCI Root Hub [Hub|Root Hub]
unknown : Ericsson|HM220d ADSL Modem:rolleyes:

Ho provato il il synch01.bin che il synch05.bin ma nisba!

Qual'è la procedura per testare titti i bin ?
nix.nix
29-08-2003, 23:06
Eci-doctor.sh

Support for USB is OK
Preliminary USB device filesystem is OK
dabusb module is not loaded: OK
ehci-hcd module is not loaded: OK
UHCI support is OK
/dev/ppp is OK
HDLC support is OK
HDLC support is OK (no bug)
I cannot find your ADSL modem: Fatal
Aug 29 23:49:55 localhost kernel: usb-uhci.c: interrupt, status 2, frame# 406
Aug 29 23:49:55 localhost kernel: usb_control/bulk_msg: timeout

[root@localhost curra]# lspcidrake -nv
usb-uhci : VIA Technologies|VT82C586B USB
unknown : Unknown|USB UHCI Root Hub [Hub|Root Hub]
unknown : unknown (08ea/00c8/ffff/ffff)
improvvisamente variato
nix.nix
29-08-2003, 23:35
lspcidrake -nv

unknown : Ericsson|HM220d ADSL Modem (vendor:08ea device:00c8)

In quale voce dell'eciconfig va specificata la voce device:00c8 ???
nix.nix
30-08-2003, 10:59
Eci-doctor.sh

You are using linux kernel version 2.4.21-0.13mdk
Support for USB is OK
Preliminary USB device filesystem is OK
dabusb module is not loaded: OK
ehci-hcd module is not loaded: OK
UHCI support is OK
/dev/ppp is OK
HDLC support is OK
HDLC support is OK (no bug)
You are using pppd version (untested)
You have an /etc/ppp/options file. Options in this file may conflict with
options from /etc/ppp/peers/adsl. We suggest to remove this file or make a
backup copy.
No existing PPP connection... trying to make one (please wait)
ioctl(PPPIOCGFLAGS): Inappropriate ioctl for device
Cannot make a PPP connection: Fatal
Aug 30 11:35:13 localhost kernel: usb-uhci.c: interrupt, status 2, frame# 590
Aug 30 11:35:13 localhost kernel: usb_control/bulk_msg: timeout

probe_device.sh


WARNING: before probing, please ensure that your USB devices are plugged in
and that your system's USB support is properly configured

USB modem to probe must be UNinitialized, it will surely appear as an unknown
device (because it is not initialized yet), for instance: ? (0547:2131)

config read from /etc/eciadsl/eciadsl.conf

your USB devices:
1: USB UHCI Root Hub (0000:0000)
2: ? (08ea:00c8)

enter device to probe (1-2):
probing, please wait..

your USB devices now:
1: USB UHCI Root Hub (0000:0000)
2: ? (08ea:00c8)

probed USB device: ?
VID1=08ea, PID1=00c8
VID2=08ea, PID2=00c8
Did you really unplug/replug your modem before launching this script?

Perchè i valori VID1 e VID2 sono identici ?
nix.nix
30-08-2003, 14:13
Sono riuscito ad arrivare alla fase3 caricamento firmware
e carica con il load1 il firmware Loading EZ-USB firmware...
can't find any GlobeSpan USB ADSL WAN Modem compatible modem, pultroppo non riesco ad identificare VID2 e PID2

eci_doctor.sh li rileva uguali
VID1=08ea, PID1=00c8
VID2=08ea, PID2=00c8
o al massimo così dopo aver startato startmedem
VID1=08ea, PID1=00c8
VID2=FFFF , PID2=FFFF
o addirittura
VID1=08ea, PID1=00c8
VID2=0000, PID2=0000

li ho provati entrambi ma il risultato e:

setting up modem (3/5)..

can't find your GlobeSpan USB ADSL WAN Modem
ECI load 2: failed
failed to get synchronization

e normale che lo veda come WAN Modem ??
nix.nix
31-08-2003, 20:50
Cosa mi dite di questo errore ?

HDLC support is OK
HDLC support is OK (no bug)
Loading EZ-USB firmware...
ECI load 1: success
Loading the GlobeSpan firmware...
ECI load 2: failed
Failed to load GlobeSpan firmware
Aug 31 21:20:33 localhost kernel: usb_control/bulk_msg: timeout