Sux
22-07-2003, 16:23
Ciao,
è da oggi che il masterizzate non funziona + adeguatamente.
Mi ha fallito ben 3 scritture. Il problema credo sia del masterizzatore che gira a vuoto poi si ferma poi riinizia a girare a vuoto...:muro:
ecco cosa mi dice Nero:
Windows 98 4.90 (ME)
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 17.00.00
Nero Version: 5.5.9.14 (Nero Express)
Recorder: <LITE-ON LTR-52246S> Version: 6S0D - HA 0 TA 1 - 5.5.9.14
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LG CD-ROM CRD-8520B>Version: 1.00 - HA 0 TA 0 - 5.5.9.14
Adapter driver: <ESDI_506> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
LG CD-ROM CRD-8520B (Target 0, I:): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
LITE-ON LTR-52246S (Target 1, J:): Autoinsert On, DMA On, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 61865984 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523704kB)
Free physical memory: 0MB (136kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
22.7.2003
CD-ROM (ISO)
17.19.10 #1 Text 0 File Isodoc.cpp, Line 6887
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
17.19.10 #2 Phase 90 File dlgbrnst.cpp, Line 1571
Buffer Underrun Protection activated
17.19.10 #3 Text 0 File Reader.cpp, Line 118
Reader running
17.19.10 #4 Text 0 File Writer.cpp, Line 127
Writer LITE-ON LTR-52246S running
17.19.10 #5 ISO9660GEN -11 File geniso.cpp, Line 4484
First writeable address = 0 (0x00000000)
17.19.10 #6 Text 0 File Burncd.cpp, Line 3588
Turn on Track-At-Once, using CD-R/RW media
17.19.10 #7 Text 0 File ThreadedTransferInterface.cpp, Line 660
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 308868 (308868) = #308868/68:38.18
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
17.19.28 #8 Text 0 File DlgWaitCD.cpp, Line 203
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 308867 (68:40.17)
17.19.28 #9 Text 0 File DlgWaitCD.cpp, Line 208
Write in overburning mode: FALSE
17.19.28 #10 Text 0 File DlgWaitCD.cpp, Line 1420
Recorder: LITE-ON LTR-52246S;
CDRW code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
17.19.28 #11 Text 0 File BurnCDUtil.h, Line 129
Enable auto-insert wasn't successfull for all drives.
17.19.28 #12 Text 0 File ThreadedTransferInterface.cpp, Line 812
Prepare recorder LITE-ON LTR-52246S for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 632868864
17.19.28 #13 Text 0 File ThreadedTransferInterface.cpp, Line 840
Removed 2 run-out blocks from end of track 1.
17.19.28 #14 Text 0 File ThreadedTransferInterface.cpp, Line 660
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 308868 (308868) = #308868/68:38.18
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 308866 blocks [LITE-ON LTR-52246S ]
--------------------------------------------------------------
17.19.28 #15 Phase 24 File dlgbrnst.cpp, Line 1571
Caching of files started
17.19.28 #16 Phase 25 File dlgbrnst.cpp, Line 1571
Caching of files completed
17.19.28 #17 Phase 36 File dlgbrnst.cpp, Line 1571
Burn process started at 24x (3.600 KB/s)
17.19.28 #18 Text 0 File ThreadedTransferInterface.cpp, Line 1948
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
17.19.28 #19 Text 0 File Mmc.cpp, Line 17168
Set BUFE: supported -> ON , SMART-BURN : ON
17.21.13 #20 Text 0 File Scsicmd.cpp, Line 1935
SCSI timeout (2), 90000ms, CDB Data[hex]: 2A 00 00 00 00 00 00 00 1F 00 00 00
17.21.13 #21 CDR -1175 File Cdrdrv.cpp, Line 1295
Internal trace
Command timeout occured: timeout 90000ms, counter 1
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
17.21.13 #22 SCSI -26 File Cdrdrv.cpp, Line 1326
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x02270000
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
17.21.13 #23 SCSI -26 File Cdrdrv.cpp, Line 1381
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x02270000
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
17.21.13 #24 CDR -26 File Writer.cpp, Line 335
SCSI/ATAPI command timeout error
17.21.14 #25 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
17.21.20 #26 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader
17.21.30 #27 Text 0 File Scsicmd.cpp, Line 1935
SCSI timeout (2), 10000ms, CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00
17.21.30 #28 SCSI -1000 File Cdrdrv.cpp, Line 1177
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
17.21.30 #29 CDR -1175 File Cdrdrv.cpp, Line 1193
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00
17.21.30 #30 SCSI -26 File Cdrdrv.cpp, Line 1221
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
17.22.44 #31 CDR -1000 File WriterStatus.cpp, Line 185
SCSI/IDE error
17.22.44 #32 TRANSFER -18 File WriterStatus.cpp, Line 185
Could not perform EndTrack
17.22.44 #33 CDR -201 File WriterStatus.cpp, Line 188
Invalid write state
17.22.44 #34 TRANSFER -18 File WriterStatus.cpp, Line 188
Could not perform EndTrack
17.22.44 #35 Phase 38 File dlgbrnst.cpp, Line 1571
Burn process failed at 24x (3.600 KB/s)
17.22.44 #36 Text 0 File Scsicmd.cpp, Line 402
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17.00.00
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/09/2002 18.01.04
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (089), size=197984 bytes, created 03/03/2001 4.55.54
File 'IoSubsys\CDRALVSD.VXD': Ver=1.00 (1030), size=20047 bytes, created 03/03/2001 4.55.54
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 03/03/2001 4.55.54
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17.00.00
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17.00.00
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17.00.00
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17.00.00
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17.00.00
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17.00.00
File 'IoSubsys\ElbyCDIO.vxd': Ver=4, 0, 0, 0, size=15627 bytes, created 04/04/2002 10.49.56
è da oggi che il masterizzate non funziona + adeguatamente.
Mi ha fallito ben 3 scritture. Il problema credo sia del masterizzatore che gira a vuoto poi si ferma poi riinizia a girare a vuoto...:muro:
ecco cosa mi dice Nero:
Windows 98 4.90 (ME)
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 17.00.00
Nero Version: 5.5.9.14 (Nero Express)
Recorder: <LITE-ON LTR-52246S> Version: 6S0D - HA 0 TA 1 - 5.5.9.14
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LG CD-ROM CRD-8520B>Version: 1.00 - HA 0 TA 0 - 5.5.9.14
Adapter driver: <ESDI_506> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
LG CD-ROM CRD-8520B (Target 0, I:): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
LITE-ON LTR-52246S (Target 1, J:): Autoinsert On, DMA On, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 61865984 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523704kB)
Free physical memory: 0MB (136kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
22.7.2003
CD-ROM (ISO)
17.19.10 #1 Text 0 File Isodoc.cpp, Line 6887
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
17.19.10 #2 Phase 90 File dlgbrnst.cpp, Line 1571
Buffer Underrun Protection activated
17.19.10 #3 Text 0 File Reader.cpp, Line 118
Reader running
17.19.10 #4 Text 0 File Writer.cpp, Line 127
Writer LITE-ON LTR-52246S running
17.19.10 #5 ISO9660GEN -11 File geniso.cpp, Line 4484
First writeable address = 0 (0x00000000)
17.19.10 #6 Text 0 File Burncd.cpp, Line 3588
Turn on Track-At-Once, using CD-R/RW media
17.19.10 #7 Text 0 File ThreadedTransferInterface.cpp, Line 660
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 308868 (308868) = #308868/68:38.18
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
17.19.28 #8 Text 0 File DlgWaitCD.cpp, Line 203
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 308867 (68:40.17)
17.19.28 #9 Text 0 File DlgWaitCD.cpp, Line 208
Write in overburning mode: FALSE
17.19.28 #10 Text 0 File DlgWaitCD.cpp, Line 1420
Recorder: LITE-ON LTR-52246S;
CDRW code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
17.19.28 #11 Text 0 File BurnCDUtil.h, Line 129
Enable auto-insert wasn't successfull for all drives.
17.19.28 #12 Text 0 File ThreadedTransferInterface.cpp, Line 812
Prepare recorder LITE-ON LTR-52246S for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 632868864
17.19.28 #13 Text 0 File ThreadedTransferInterface.cpp, Line 840
Removed 2 run-out blocks from end of track 1.
17.19.28 #14 Text 0 File ThreadedTransferInterface.cpp, Line 660
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 308868 (308868) = #308868/68:38.18
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 308866 blocks [LITE-ON LTR-52246S ]
--------------------------------------------------------------
17.19.28 #15 Phase 24 File dlgbrnst.cpp, Line 1571
Caching of files started
17.19.28 #16 Phase 25 File dlgbrnst.cpp, Line 1571
Caching of files completed
17.19.28 #17 Phase 36 File dlgbrnst.cpp, Line 1571
Burn process started at 24x (3.600 KB/s)
17.19.28 #18 Text 0 File ThreadedTransferInterface.cpp, Line 1948
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
17.19.28 #19 Text 0 File Mmc.cpp, Line 17168
Set BUFE: supported -> ON , SMART-BURN : ON
17.21.13 #20 Text 0 File Scsicmd.cpp, Line 1935
SCSI timeout (2), 90000ms, CDB Data[hex]: 2A 00 00 00 00 00 00 00 1F 00 00 00
17.21.13 #21 CDR -1175 File Cdrdrv.cpp, Line 1295
Internal trace
Command timeout occured: timeout 90000ms, counter 1
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
17.21.13 #22 SCSI -26 File Cdrdrv.cpp, Line 1326
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x02270000
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
17.21.13 #23 SCSI -26 File Cdrdrv.cpp, Line 1381
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x02270000
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
17.21.13 #24 CDR -26 File Writer.cpp, Line 335
SCSI/ATAPI command timeout error
17.21.14 #25 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
17.21.20 #26 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader
17.21.30 #27 Text 0 File Scsicmd.cpp, Line 1935
SCSI timeout (2), 10000ms, CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00
17.21.30 #28 SCSI -1000 File Cdrdrv.cpp, Line 1177
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
17.21.30 #29 CDR -1175 File Cdrdrv.cpp, Line 1193
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00
17.21.30 #30 SCSI -26 File Cdrdrv.cpp, Line 1221
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
17.22.44 #31 CDR -1000 File WriterStatus.cpp, Line 185
SCSI/IDE error
17.22.44 #32 TRANSFER -18 File WriterStatus.cpp, Line 185
Could not perform EndTrack
17.22.44 #33 CDR -201 File WriterStatus.cpp, Line 188
Invalid write state
17.22.44 #34 TRANSFER -18 File WriterStatus.cpp, Line 188
Could not perform EndTrack
17.22.44 #35 Phase 38 File dlgbrnst.cpp, Line 1571
Burn process failed at 24x (3.600 KB/s)
17.22.44 #36 Text 0 File Scsicmd.cpp, Line 402
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17.00.00
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/09/2002 18.01.04
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (089), size=197984 bytes, created 03/03/2001 4.55.54
File 'IoSubsys\CDRALVSD.VXD': Ver=1.00 (1030), size=20047 bytes, created 03/03/2001 4.55.54
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 03/03/2001 4.55.54
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17.00.00
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17.00.00
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17.00.00
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17.00.00
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17.00.00
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17.00.00
File 'IoSubsys\ElbyCDIO.vxd': Ver=4, 0, 0, 0, size=15627 bytes, created 04/04/2002 10.49.56