ElMato
06-07-2003, 10:41
X il PC in sign vorrei cambiare le ram e sono indeciso tra:
2 X 256MB DDR PC -3700 (466MHZ) OCZ GOLD
# Features: ULN Technology: (U)ltra (L)ow (N)oise shielded PCB
# Lifetime Manufacturer Warranty
# 256MB modules based on OCZ brand EL DDR IC
# PN-OCZ466256ELGE
# Gold Heatspreader
# Featuring OCZ HyperSpeed® technology for outrageous top end speeds*
# Optimized for High Speed applications on Intel based dual channel chipsets
# 466Mhz CL 2-3-3-7 1T
# 2.75 volts
# EVP®(Extended Voltage Protection) Technology allowing up to 2.9 volts DDR while maintaining full warranty **
# 184 Pin Dimm
# Unbuffered
e: 512 MB (2 pcs 256) DDR (400) TwinX512-3200LLPT Corsair XMS
Tech Note: Currently, this Memory will not work with the following boards by default:
110239 Abit IS7-C RAID/Audio/IEEE AGP 8x/4x DDR (i875 Canterwood 800/533 FSB)
110240 Abit IS7-G RAID/Audio/IEEE/G-LAN AGP 8/4X DDR (i875 Canterwood 800/533 FSB)
110523 Asus P4C800 Deluxe (i875 Canterwood 800/533 FSB)
It is possible to get this memory to work on these boards by adjusting the settings in the BIOS to a slightly higher latency (2-3-2 or 2-3-3).
TWINX512-3200LL
The TWINX512-3200LL is a 512 MByte matched memory pair specifically designed for motherboards using chip sets with dual memory channels. Current two-channel chip sets include the Nforce2 from Nvidia and the E7205 ("Granite Bay") from Intel. This memory kit consists of two CMX256A-3200LL 400MHz ultra-low-latency memory modules that have been tested together on an Nforce2-based dual-channel motherboard. Extra low latency settings maximize overall system performance when operating synchronously with the front side bus. TWINX memory kits are designed to provide the ultimate in performance and stability in dual channel boards.
# MEMORY KIT FEATURES 512 Megabytes of memory
- Two CMX256A-3200LL memory DIMMs
# Dual channel testing environment
- 200MHz NForce2-based test setup
# Tested and packaged in pairs
- Modules tested together in Asus A7N8X-based test setup
- Packaged together immediately following system test
# Benchmarked using both Nforce2 and Intel "Granite Bay" chip sets
# Lifetime warranty
XMS ULTRA LOW LATENCY
# Plug-n-FragTM Auto-Configuration
- Boots automatically using low latency values
# Tested at ultra-low latency settings
(2-2-2-5), command rate of 1T
# Legendary Corsair reliability and service
Ho visto anche questa:
2 X 256 MB DDR 3700 CMX256A-3700PT Corsair XMS
Specifications
* Part: CMX256A-3700PT XMS
* 256MB DDR Memory
* XMS3700 (467MHZ BUS)
* 3-4-4-8
* 32X64 (184PIN)
* Unbuffered
* Platinum Heat Spreader
Qualcuno le ha provate con la A7V8X? Sono compatibili o possono avere dei problemi con la mia scheda madre? Che cosa mi consigliate?
Ciao by ElMato
2 X 256MB DDR PC -3700 (466MHZ) OCZ GOLD
# Features: ULN Technology: (U)ltra (L)ow (N)oise shielded PCB
# Lifetime Manufacturer Warranty
# 256MB modules based on OCZ brand EL DDR IC
# PN-OCZ466256ELGE
# Gold Heatspreader
# Featuring OCZ HyperSpeed® technology for outrageous top end speeds*
# Optimized for High Speed applications on Intel based dual channel chipsets
# 466Mhz CL 2-3-3-7 1T
# 2.75 volts
# EVP®(Extended Voltage Protection) Technology allowing up to 2.9 volts DDR while maintaining full warranty **
# 184 Pin Dimm
# Unbuffered
e: 512 MB (2 pcs 256) DDR (400) TwinX512-3200LLPT Corsair XMS
Tech Note: Currently, this Memory will not work with the following boards by default:
110239 Abit IS7-C RAID/Audio/IEEE AGP 8x/4x DDR (i875 Canterwood 800/533 FSB)
110240 Abit IS7-G RAID/Audio/IEEE/G-LAN AGP 8/4X DDR (i875 Canterwood 800/533 FSB)
110523 Asus P4C800 Deluxe (i875 Canterwood 800/533 FSB)
It is possible to get this memory to work on these boards by adjusting the settings in the BIOS to a slightly higher latency (2-3-2 or 2-3-3).
TWINX512-3200LL
The TWINX512-3200LL is a 512 MByte matched memory pair specifically designed for motherboards using chip sets with dual memory channels. Current two-channel chip sets include the Nforce2 from Nvidia and the E7205 ("Granite Bay") from Intel. This memory kit consists of two CMX256A-3200LL 400MHz ultra-low-latency memory modules that have been tested together on an Nforce2-based dual-channel motherboard. Extra low latency settings maximize overall system performance when operating synchronously with the front side bus. TWINX memory kits are designed to provide the ultimate in performance and stability in dual channel boards.
# MEMORY KIT FEATURES 512 Megabytes of memory
- Two CMX256A-3200LL memory DIMMs
# Dual channel testing environment
- 200MHz NForce2-based test setup
# Tested and packaged in pairs
- Modules tested together in Asus A7N8X-based test setup
- Packaged together immediately following system test
# Benchmarked using both Nforce2 and Intel "Granite Bay" chip sets
# Lifetime warranty
XMS ULTRA LOW LATENCY
# Plug-n-FragTM Auto-Configuration
- Boots automatically using low latency values
# Tested at ultra-low latency settings
(2-2-2-5), command rate of 1T
# Legendary Corsair reliability and service
Ho visto anche questa:
2 X 256 MB DDR 3700 CMX256A-3700PT Corsair XMS
Specifications
* Part: CMX256A-3700PT XMS
* 256MB DDR Memory
* XMS3700 (467MHZ BUS)
* 3-4-4-8
* 32X64 (184PIN)
* Unbuffered
* Platinum Heat Spreader
Qualcuno le ha provate con la A7V8X? Sono compatibili o possono avere dei problemi con la mia scheda madre? Che cosa mi consigliate?
Ciao by ElMato