R@nda
11-03-2003, 13:18
E' appena stata rilasciata da Uber la versione di bios moddata della 1002A
http://homepage.ntlworld.com/michael.mcclay/A7N8X/1002A1c-Uber.rar
Pare che qeusta volta i voltaggi per il Chipset funzionino correttamente
E che il V core per le Dimm si possa prtare a 2,9
Più altri settaggi che il Bios Asus teneva nascosti.
Ecco qui tutte le novità
1)This A1 revision has more AGP voltage and Q-fan options to select.
2)There are also more options for the UART2 connector like 'smart card' and 'ASKIR'.
3)Also the AUTO mode for the printer port IO/IRQ allocation has been made selectable.
4)S3(STR) is now selectable for option 'ACPI Suspend to RAM'.
5)Additional Power On By PS/2 Keyboard/Power On By PS/2 Mouse options are available.
6)2.9V is now available in the DDR Reference Voltage selection choices.
7)1.8V is now available in the AGP VDDQ Voltage selection choices.
New to the .A revision is that Asus have the Q-Fan feature working.
Just plug the fan you want controled into the PWR fan connector and
set the desired settings in the Q-fan section in the bios.
Flash this like you would the normal Asus supplied bios.
Here is a list of what I re-enable that Asus have hidden form the users.
Legacy Diskette
Video
CHIP Voltage Control
OnChip IDE Channel
Primary Master
Primary Slave
Primary Master
Primary Slave
OnChip IDE Channel
Secondary Master
Secondary Slave
Secondary Master
Secondary Slave
IDE Prefetch Mode
IDE HDD Block Mode
ACPI function
Power Management
HDD Power Down
Reset Configuration
MPS Version Contol
Small Logo(EPA)
Machine MAC(NV)
MAC(NV) Address
KB Power ON Pass
Hot Key Power ON
UR2 Duplex Mode
For definitions for most of these options visit the bios guide at
http://www.rojakpot.com/Speed_Demonz/BIOS_Guide/BIOS_Guide_Index.htm
http://homepage.ntlworld.com/michael.mcclay/A7N8X/1002A1c-Uber.rar
Pare che qeusta volta i voltaggi per il Chipset funzionino correttamente
E che il V core per le Dimm si possa prtare a 2,9
Più altri settaggi che il Bios Asus teneva nascosti.
Ecco qui tutte le novità
1)This A1 revision has more AGP voltage and Q-fan options to select.
2)There are also more options for the UART2 connector like 'smart card' and 'ASKIR'.
3)Also the AUTO mode for the printer port IO/IRQ allocation has been made selectable.
4)S3(STR) is now selectable for option 'ACPI Suspend to RAM'.
5)Additional Power On By PS/2 Keyboard/Power On By PS/2 Mouse options are available.
6)2.9V is now available in the DDR Reference Voltage selection choices.
7)1.8V is now available in the AGP VDDQ Voltage selection choices.
New to the .A revision is that Asus have the Q-Fan feature working.
Just plug the fan you want controled into the PWR fan connector and
set the desired settings in the Q-fan section in the bios.
Flash this like you would the normal Asus supplied bios.
Here is a list of what I re-enable that Asus have hidden form the users.
Legacy Diskette
Video
CHIP Voltage Control
OnChip IDE Channel
Primary Master
Primary Slave
Primary Master
Primary Slave
OnChip IDE Channel
Secondary Master
Secondary Slave
Secondary Master
Secondary Slave
IDE Prefetch Mode
IDE HDD Block Mode
ACPI function
Power Management
HDD Power Down
Reset Configuration
MPS Version Contol
Small Logo(EPA)
Machine MAC(NV)
MAC(NV) Address
KB Power ON Pass
Hot Key Power ON
UR2 Duplex Mode
For definitions for most of these options visit the bios guide at
http://www.rojakpot.com/Speed_Demonz/BIOS_Guide/BIOS_Guide_Index.htm