dherfel
20-11-2002, 09:21
http://vcdhelp.com/dvdplayershack.php?select=Technosonic%20DVD-202
Make sure no disk is in the drive
Hit Setup
Press Setup, Next, Prev, Next, Prev
It now says VER.. and some number
Change that to 255 with the Left/Right keys
with the Up/Down keys go to the other VER. entries (3001, 4001)
and change those to 3000 and 4000
It's now Macrovision free..
http://www.dvd365.net/?hacks/m-players.htm
Turn player on with no disk in drive
Press Setup
Alternate volume '+' and '-' on the Remote until the menu disappears and you get "ver 2" in the top right of the screen
Press the left or right arrow keys on your remote to scroll through the different regions until you get to the one you want then simply press Setup to save. Select ver 225 to set to all Regions. This will save you having to set it manually every time you put a different region disk in but may not play the newer RCE DVDs on the market now. To play them you should set to the specific region
http://www.regionfreedvd.net/player/mustek.html
1. Make sure there is no disc in the player and the disc try is closed.
2. Press Setup on the remote control.
3. Press the volume + and - keys (not together, but one at a time) until you see the word "VER 2".
4. Use the cursor keys to cycle through until you get "VER 255" which is region free.
5. All other numbers correspond to the region codes.
Disable Macrovision:
1. Change the VER numbers seen in step 3 above from 3001 to 3000 and 4001 to 4000.
qui č ancora leggermente diverso... che ne dite? io mi fiderei a questo punto della media, e cioč ai metodi 1 e 3
se sbaglio che succede?
io sto ancora aspettando il lettore e non posso provare, fatemi sapere!
Make sure no disk is in the drive
Hit Setup
Press Setup, Next, Prev, Next, Prev
It now says VER.. and some number
Change that to 255 with the Left/Right keys
with the Up/Down keys go to the other VER. entries (3001, 4001)
and change those to 3000 and 4000
It's now Macrovision free..
http://www.dvd365.net/?hacks/m-players.htm
Turn player on with no disk in drive
Press Setup
Alternate volume '+' and '-' on the Remote until the menu disappears and you get "ver 2" in the top right of the screen
Press the left or right arrow keys on your remote to scroll through the different regions until you get to the one you want then simply press Setup to save. Select ver 225 to set to all Regions. This will save you having to set it manually every time you put a different region disk in but may not play the newer RCE DVDs on the market now. To play them you should set to the specific region
http://www.regionfreedvd.net/player/mustek.html
1. Make sure there is no disc in the player and the disc try is closed.
2. Press Setup on the remote control.
3. Press the volume + and - keys (not together, but one at a time) until you see the word "VER 2".
4. Use the cursor keys to cycle through until you get "VER 255" which is region free.
5. All other numbers correspond to the region codes.
Disable Macrovision:
1. Change the VER numbers seen in step 3 above from 3001 to 3000 and 4001 to 4000.
qui č ancora leggermente diverso... che ne dite? io mi fiderei a questo punto della media, e cioč ai metodi 1 e 3
se sbaglio che succede?
io sto ancora aspettando il lettore e non posso provare, fatemi sapere!