fregior
28-12-2017, 11:28
Ciao a tutti,
ho problemi a formattare il mio PC fisso e installare Windows.
Ho provato con smartmontools da ubuntu ed ho ottenuto i seguenti risultati.
Potete confermarmi che il problema è plausibilmente nell'HDD?
Grazie tanto.
In allegato i logs.
ubuntu@ubuntu:~$ sudo smartctl -l selftest /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.13.0-16-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 19530 58379827
# 2 Conveyance offline Completed without error 00% 9459 -
ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.13.0-16-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue Serial ATA
Device Model: WDC WD3200AAJS-00VWA0
Serial Number: WD-WMARW0090063
LU WWN Device Id: 5 0014ee 055af5a94
Firmware Version: 12.01B02
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Thu Dec 28 01:34:40 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 8760) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 104) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 194 194 051 Pre-fail Always - 102143
3 Spin_Up_Time 0x0003 160 156 021 Pre-fail Always - 4958
4 Start_Stop_Count 0x0032 090 090 000 Old_age Always - 10124
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 200 200 051 Old_age Always - 0
9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 19536
10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 090 090 000 Old_age Always - 10039
192 Power-Off_Retract_Count 0x0032 197 197 000 Old_age Always - 2877
193 Load_Cycle_Count 0x0032 197 197 000 Old_age Always - 10176
194 Temperature_Celsius 0x0022 114 085 000 Old_age Always - 33
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 199 199 000 Old_age Always - 78
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 540
200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0
SMART Error Log Version: 1
ATA Error Count: 260 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 260 occurred at disk power-on lifetime: 19525 hours (813 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff 07 44 40 Error: UNC at LBA = 0x004407ff = 4458495
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 e0 f8 07 44 12 08 03:39:52.703 READ FPDMA QUEUED
ef 10 02 00 00 00 00 08 03:39:52.703 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 08 03:39:52.703 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 08 03:39:52.702 IDENTIFY DEVICE
ef 03 46 00 00 00 00 08 03:39:52.702 SET FEATURES [Set transfer mode]
Error 259 occurred at disk power-on lifetime: 19525 hours (813 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f9 07 44 40 Error: UNC at LBA = 0x004407f9 = 4458489
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 58 f8 07 44 12 08 03:39:49.423 READ FPDMA QUEUED
ef 10 02 00 00 00 00 08 03:39:49.423 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 08 03:39:49.423 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 08 03:39:49.421 IDENTIFY DEVICE
ef 03 46 00 00 00 00 08 03:39:49.421 SET FEATURES [Set transfer mode]
Error 258 occurred at disk power-on lifetime: 19525 hours (813 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 01 fa 07 44 40 Error: AMNF at LBA = 0x004407fa = 4458490
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 b0 f8 07 44 12 08 03:39:44.622 READ FPDMA QUEUED
ef 10 02 00 00 00 00 08 03:39:44.622 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 08 03:39:44.622 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 08 03:39:44.621 IDENTIFY DEVICE
ef 03 46 00 00 00 00 08 03:39:44.621 SET FEATURES [Set transfer mode]
Error 257 occurred at disk power-on lifetime: 19525 hours (813 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 fa 07 44 40 Error: UNC at LBA = 0x004407fa = 4458490
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 d0 f8 07 44 12 08 03:38:24.156 READ FPDMA QUEUED
ef 10 02 00 00 00 00 08 03:38:24.156 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 08 03:38:24.156 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 08 03:38:24.155 IDENTIFY DEVICE
ef 03 46 00 00 00 00 08 03:38:24.155 SET FEATURES [Set transfer mode]
Error 256 occurred at disk power-on lifetime: 19525 hours (813 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 fe 07 44 40 Error: UNC at LBA = 0x004407fe = 4458494
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 b0 f8 07 44 12 08 03:38:16.702 READ FPDMA QUEUED
60 08 a8 30 2a 00 00 08 03:38:16.698 READ FPDMA QUEUED
60 00 98 e0 09 00 00 08 03:38:16.697 READ FPDMA QUEUED
60 00 90 e0 08 00 00 08 03:38:16.697 READ FPDMA QUEUED
60 80 88 60 08 00 00 08 03:38:16.696 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 19530 58379827
# 2 Conveyance offline Completed without error 00% 9459 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
ho problemi a formattare il mio PC fisso e installare Windows.
Ho provato con smartmontools da ubuntu ed ho ottenuto i seguenti risultati.
Potete confermarmi che il problema è plausibilmente nell'HDD?
Grazie tanto.
In allegato i logs.
ubuntu@ubuntu:~$ sudo smartctl -l selftest /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.13.0-16-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 19530 58379827
# 2 Conveyance offline Completed without error 00% 9459 -
ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.13.0-16-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue Serial ATA
Device Model: WDC WD3200AAJS-00VWA0
Serial Number: WD-WMARW0090063
LU WWN Device Id: 5 0014ee 055af5a94
Firmware Version: 12.01B02
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Thu Dec 28 01:34:40 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 8760) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 104) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 194 194 051 Pre-fail Always - 102143
3 Spin_Up_Time 0x0003 160 156 021 Pre-fail Always - 4958
4 Start_Stop_Count 0x0032 090 090 000 Old_age Always - 10124
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 200 200 051 Old_age Always - 0
9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 19536
10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 090 090 000 Old_age Always - 10039
192 Power-Off_Retract_Count 0x0032 197 197 000 Old_age Always - 2877
193 Load_Cycle_Count 0x0032 197 197 000 Old_age Always - 10176
194 Temperature_Celsius 0x0022 114 085 000 Old_age Always - 33
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 199 199 000 Old_age Always - 78
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 540
200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0
SMART Error Log Version: 1
ATA Error Count: 260 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 260 occurred at disk power-on lifetime: 19525 hours (813 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff 07 44 40 Error: UNC at LBA = 0x004407ff = 4458495
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 e0 f8 07 44 12 08 03:39:52.703 READ FPDMA QUEUED
ef 10 02 00 00 00 00 08 03:39:52.703 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 08 03:39:52.703 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 08 03:39:52.702 IDENTIFY DEVICE
ef 03 46 00 00 00 00 08 03:39:52.702 SET FEATURES [Set transfer mode]
Error 259 occurred at disk power-on lifetime: 19525 hours (813 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f9 07 44 40 Error: UNC at LBA = 0x004407f9 = 4458489
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 58 f8 07 44 12 08 03:39:49.423 READ FPDMA QUEUED
ef 10 02 00 00 00 00 08 03:39:49.423 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 08 03:39:49.423 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 08 03:39:49.421 IDENTIFY DEVICE
ef 03 46 00 00 00 00 08 03:39:49.421 SET FEATURES [Set transfer mode]
Error 258 occurred at disk power-on lifetime: 19525 hours (813 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 01 fa 07 44 40 Error: AMNF at LBA = 0x004407fa = 4458490
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 b0 f8 07 44 12 08 03:39:44.622 READ FPDMA QUEUED
ef 10 02 00 00 00 00 08 03:39:44.622 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 08 03:39:44.622 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 08 03:39:44.621 IDENTIFY DEVICE
ef 03 46 00 00 00 00 08 03:39:44.621 SET FEATURES [Set transfer mode]
Error 257 occurred at disk power-on lifetime: 19525 hours (813 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 fa 07 44 40 Error: UNC at LBA = 0x004407fa = 4458490
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 d0 f8 07 44 12 08 03:38:24.156 READ FPDMA QUEUED
ef 10 02 00 00 00 00 08 03:38:24.156 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 08 03:38:24.156 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 08 03:38:24.155 IDENTIFY DEVICE
ef 03 46 00 00 00 00 08 03:38:24.155 SET FEATURES [Set transfer mode]
Error 256 occurred at disk power-on lifetime: 19525 hours (813 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 fe 07 44 40 Error: UNC at LBA = 0x004407fe = 4458494
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 b0 f8 07 44 12 08 03:38:16.702 READ FPDMA QUEUED
60 08 a8 30 2a 00 00 08 03:38:16.698 READ FPDMA QUEUED
60 00 98 e0 09 00 00 08 03:38:16.697 READ FPDMA QUEUED
60 00 90 e0 08 00 00 08 03:38:16.697 READ FPDMA QUEUED
60 80 88 60 08 00 00 08 03:38:16.696 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 19530 58379827
# 2 Conveyance offline Completed without error 00% 9459 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.