Tsunami!
02-03-2016, 09:37
cerco 2 schedine ram da 1 gb per mobo intel D101GGC, indicate chiaramente prezzo e localita'.
di seguito le specifiche richieste :
1.4 System Memory
The board has two DIMM sockets and supports the following memory features:
• 2.5 V (only) DDR SDRAM DIMMs
• Unbuffered, single-sided or double-sided DIMMs with the following restriction: Double-sided DIMMS with x16 organization are not supported.
• Minimum total system memory: 128 MB
• Non-ECC DIMMs
• Serial Presence Detect
• DDR 400 MHz and DDR 333 MHz SDRAM DIMMs
Table 3 lists the supported system bus frequency and memory speed combinations.
Table 3. Supported System Bus Frequency and Memory Speed Combinations
To use this type of DIMM… The processor's system bus frequency must be…
DDR 400 800 MHz
DDR 333 800 or 533 MHz
�� NOTE
To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the DIMMs may not function under the determined frequency.
Table 4 lists the supported DIMM configurations.
Table 4. Supported Memory Configurations
DIMM Capacity 1024 MB
Configuration SS
SDRAM Density 1 Gbit
SDRAM Organization Front-side/Back-side
Number of SDRAM 128 M x 8/empty
Devices 8
Note: In the second column, “DS” refers to double-sided memory modules (containing two rows of SDRAM) and “SS” refers to single-sided memory modules (containing one row of SDRAM).
di seguito le specifiche richieste :
1.4 System Memory
The board has two DIMM sockets and supports the following memory features:
• 2.5 V (only) DDR SDRAM DIMMs
• Unbuffered, single-sided or double-sided DIMMs with the following restriction: Double-sided DIMMS with x16 organization are not supported.
• Minimum total system memory: 128 MB
• Non-ECC DIMMs
• Serial Presence Detect
• DDR 400 MHz and DDR 333 MHz SDRAM DIMMs
Table 3 lists the supported system bus frequency and memory speed combinations.
Table 3. Supported System Bus Frequency and Memory Speed Combinations
To use this type of DIMM… The processor's system bus frequency must be…
DDR 400 800 MHz
DDR 333 800 or 533 MHz
�� NOTE
To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the DIMMs may not function under the determined frequency.
Table 4 lists the supported DIMM configurations.
Table 4. Supported Memory Configurations
DIMM Capacity 1024 MB
Configuration SS
SDRAM Density 1 Gbit
SDRAM Organization Front-side/Back-side
Number of SDRAM 128 M x 8/empty
Devices 8
Note: In the second column, “DS” refers to double-sided memory modules (containing two rows of SDRAM) and “SS” refers to single-sided memory modules (containing one row of SDRAM).