gokou
25-08-2015, 14:48
Salve ragazzi, vendo questa scheda audio PCI
Sound Blaster Audigy modello SB1394
Audigy Specifications
BASIC SPEC
• A-D & D-A converters: 24-bit.
• MME recording: 8 or 16-bit, at 8, 11.025, 16, 22.05, 32, 44.1, or 48kHz.
• MME playback: 8, 16, or 24-bit, at 8, 11, 16, 22, 32, 44.1, 64, 88.2, and 96kHz.
• ASIO recording/playback: 16 or 24-bit, at fixed 48kHz.
• Signal-to-noise ratio (D-A): 100dB.
• Internal path: 32-bit.
I/O
• Card internal I/O: Aux, CD analogue,
CD S/PDIF, TAD.
• Card external I/O: mono mic, stereo line in and out, stereo rear out, analogue/digital out (analogue centre/subwoofer or six-channel Dolby 5.1 digital), SB1394 port, MIDI/joystick port (on cable adaptor).
• Drive I/O: co-axial S/PDIF in and out, Toslink optical S/PDIF in and out, stereo Aux 2 In, stereo Line/Mic 2 In, headphone out, MPU401-compatible MIDI I/O, SB1394 port.
EFFECTS
• Auto-wah.
• Chorus.
• Distortion (with pre and post EQ).
• Echo (2-tap).
• Flanger.
• Frequency Shifter (different directions for left and right channels).
• Normaliser (AGC compressor).
• Parametric equaliser (low and high shelving EQ with parametric mid).
• Pitch-shifter.
• Reverb (now with 30 parameters).
• Ring modulator.
• Vocal morpher (LFO sweep between two phonemes).
SYNTH/SAMPLING
• Hardware synth/sampler: 64-voice polyphony, 32-part multitimbral, using up to 1Gb of PC system RAM.
• Software PCI wavetable synthesis: up to 512 voices (subject to PC spec), 16 MIDI channels.
• 3D audio: supports two-speaker, four-speaker, Dolby 5.1, and headphones.
• Hardware acceleration: DirectSound, DirectSound3D (up to 32 audio streams).
Per i dirver: http://support.creative.com/Products/ProductDetails.aspx?prodID=149&prodName=Audigy%202
---------------------------------------------------------------------
Prezzo 15€ + S.S.
preferita consegna a mano in zone limitrofe
Accetto bonifico bancario, paypal(+3.5%), postepay, contanti
in vendita anche altrove, posso ritirare in qualsiasi momento
Per qualsiasi domanda non esitate a contattare.
Inserisco foto più tardi.
Grazie
Sound Blaster Audigy modello SB1394
Audigy Specifications
BASIC SPEC
• A-D & D-A converters: 24-bit.
• MME recording: 8 or 16-bit, at 8, 11.025, 16, 22.05, 32, 44.1, or 48kHz.
• MME playback: 8, 16, or 24-bit, at 8, 11, 16, 22, 32, 44.1, 64, 88.2, and 96kHz.
• ASIO recording/playback: 16 or 24-bit, at fixed 48kHz.
• Signal-to-noise ratio (D-A): 100dB.
• Internal path: 32-bit.
I/O
• Card internal I/O: Aux, CD analogue,
CD S/PDIF, TAD.
• Card external I/O: mono mic, stereo line in and out, stereo rear out, analogue/digital out (analogue centre/subwoofer or six-channel Dolby 5.1 digital), SB1394 port, MIDI/joystick port (on cable adaptor).
• Drive I/O: co-axial S/PDIF in and out, Toslink optical S/PDIF in and out, stereo Aux 2 In, stereo Line/Mic 2 In, headphone out, MPU401-compatible MIDI I/O, SB1394 port.
EFFECTS
• Auto-wah.
• Chorus.
• Distortion (with pre and post EQ).
• Echo (2-tap).
• Flanger.
• Frequency Shifter (different directions for left and right channels).
• Normaliser (AGC compressor).
• Parametric equaliser (low and high shelving EQ with parametric mid).
• Pitch-shifter.
• Reverb (now with 30 parameters).
• Ring modulator.
• Vocal morpher (LFO sweep between two phonemes).
SYNTH/SAMPLING
• Hardware synth/sampler: 64-voice polyphony, 32-part multitimbral, using up to 1Gb of PC system RAM.
• Software PCI wavetable synthesis: up to 512 voices (subject to PC spec), 16 MIDI channels.
• 3D audio: supports two-speaker, four-speaker, Dolby 5.1, and headphones.
• Hardware acceleration: DirectSound, DirectSound3D (up to 32 audio streams).
Per i dirver: http://support.creative.com/Products/ProductDetails.aspx?prodID=149&prodName=Audigy%202
---------------------------------------------------------------------
Prezzo 15€ + S.S.
preferita consegna a mano in zone limitrofe
Accetto bonifico bancario, paypal(+3.5%), postepay, contanti
in vendita anche altrove, posso ritirare in qualsiasi momento
Per qualsiasi domanda non esitate a contattare.
Inserisco foto più tardi.
Grazie