L.T.
12-07-2015, 14:27
Ciao a tutti,
non riesco ad installare la distro centOS 7, quando faccio l'istallazione non riesce ad
trovare, credo l'hardisk. Devo installarlo in un disco M.2 GPT.
Ho creato una pendrive con rufus-2.2 inserendo il file .iso di centOS per sistemi GPT ma non funziona, ma con ubuntu, stessa installazione e stesso creazione della pendrive, tutto funziona benissimo.
Allego il log del risultato dell'istallazione di centOS:
[ 5.649346] localhost systemd[1]: Starting dracut pre-trigger hook...
[ 5.688590] localhost systemd-udevd[483]: starting version 208
[ 5.691956] localhost kernel: usb-storage 3-11:1.0: USB Mass Storage device detected
[ 5.691992] localhost kernel: scsi host0: usb-storage 3-11:1.0
[ 5.692037] localhost kernel: usb-storage 3-12:1.0: USB Mass Storage device detected
[ 5.692068] localhost kernel: scsi host1: usb-storage 3-12:1.0
[ 5.692093] localhost kernel: usbcore: registered new interface driver usb-storage
[ 5.653569] localhost dracut-pre-trigger[484]: rd.dm=0: removing DM RAID activation
[ 5.657638] localhost dracut-pre-trigger[484]: rd.md.imsm=0: no MD RAID for imsm/isw raids
[ 5.660729] localhost dracut-pre-trigger[484]: rd.md.ddf=0: no MD RAID for SNIA ddf raids
[ 5.668830] localhost dracut-pre-trigger[484]: rd.md=0: removing MD RAID activation
[ 5.740973] localhost kernel: wmi: Mapper loaded
[ 5.742646] localhost kernel: sdhci: Secure Digital Host Controller Interface driver
[ 5.742647] localhost kernel: sdhci: Copyright(c) Pierre Ossman
[ 5.759606] localhost kernel: pps_core: LinuxPPS API ver. 1 registered
[ 5.759608] localhost kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 5.760240] localhost kernel: PTP clock support registered
[ 5.762658] localhost kernel: libata version 3.00 loaded.
[ 5.763626] localhost kernel: e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 5.763628] localhost kernel: e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 5.763684] localhost kernel: [drm] Initialized drm 1.1.0 20060810
[ 5.763772] localhost kernel: e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 5.763791] localhost kernel: e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 5.772609] localhost kernel: alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 5.775609] localhost kernel: alg: No test for crc32 (crc32-pclmul)
[ 6.027390] localhost kernel: e1000e 0000:00:19.0 eth0: registered PHC clock
[ 6.027392] localhost kernel: e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 78:24:af:42:e9:3f
[ 6.027394] localhost kernel: e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 6.027417] localhost kernel: e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 6.027445] localhost kernel: ahci 0000:00:1f.2: version 3.0
[ 6.027533] localhost kernel: ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
[ 6.027560] localhost kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xe impl SATA mode
[ 6.027562] localhost kernel: ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 6.030918] localhost kernel: scsi host2: ahci
[ 6.031032] localhost kernel: scsi host3: ahci
[ 6.031091] localhost kernel: scsi host4: ahci
[ 6.031119] localhost kernel: scsi host5: ahci
[ 6.031132] localhost kernel: ata1: DUMMY
[ 6.031133] localhost kernel: ata2: SATA max UDMA/133 abar m2048@0xdfe39000 port 0xdfe39180 irq 48
[ 6.031135] localhost kernel: ata3: SATA max UDMA/133 abar m2048@0xdfe39000 port 0xdfe39200 irq 48
[ 6.031136] localhost kernel: ata4: SATA max UDMA/133 abar m2048@0xdfe39000 port 0xdfe39280 irq 48
[ 6.031209] localhost kernel: ahci 0000:02:00.0: irq 49 for MSI/MSI-X
[ 6.031488] localhost kernel: [drm] Memory usable by graphics device = 2048M
[ 6.031490] localhost kernel: checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 6.031491] localhost kernel: fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 6.031497] localhost kernel: Console: switching to colour dummy device 80x25
[ 6.031528] localhost kernel: [drm] Replacing VGA console driver
[ 6.041710] localhost kernel: ahci 0000:02:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 6.041712] localhost kernel: ahci 0000:02:00.0: flags: 64bit ncq led clo only pio ccc
[ 6.041855] localhost kernel: scsi host6: ahci
[ 6.041874] localhost kernel: ata5: SATA max UDMA/133 abar m8192@0xdfd00000 port 0xdfd00100 irq 49
[ 6.041963] localhost kernel: ahci 0000:08:00.0: irq 50 for MSI/MSI-X
[ 6.041974] localhost kernel: ahci: SSS flag set, parallel bus scan disabled
[ 6.042011] localhost kernel: ahci 0000:08:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 6.042012] localhost kernel: ahci 0000:08:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
[ 6.042187] localhost kernel: scsi host7: ahci
[ 6.042224] localhost kernel: scsi host8: ahci
[ 6.042239] localhost kernel: ata6: SATA max UDMA/133 abar m512@0xdfc00000 port 0xdfc00100 irq 50
[ 6.042241] localhost kernel: ata7: SATA max UDMA/133 abar m512@0xdfc00000 port 0xdfc00180 irq 50
[ 6.046667] localhost kernel: i915 0000:00:02.0: irq 51 for MSI/MSI-X
[ 6.046672] localhost kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.046672] localhost kernel: [drm] Driver supports precise vblank timestamp query.
[ 6.046682] localhost kernel: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.048719] localhost systemd-udevd[558]: renamed network interface eth0 to eno1
[ 6.183161] localhost kernel: fbcon: inteldrmfb (fb0) is primary device
[ 6.201833] localhost kernel: Console: switching to colour frame buffer device 240x67
[ 6.204468] localhost kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.204469] localhost kernel: i915 0000:00:02.0: registered panic notifier
[ 6.211881] localhost kernel: acpi device:17: registered as cooling_device13
[ 6.211901] localhost kernel: ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.211919] localhost kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 6.211955] localhost kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.335661] localhost kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.335673] localhost kernel: ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.335684] localhost kernel: ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.335943] localhost kernel: ata4.00: supports DRM functions and may not be fully accessible
[ 6.335960] localhost kernel: ata4.00: ATA-9: Crucial_CT240M500SSD1, MU05, max UDMA/133
[ 6.335961] localhost kernel: ata4.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 6.336528] localhost kernel: ata2.00: ATA-8: WDC WD10EZEX-00ER1A0, 80.00A80, max UDMA/133
[ 6.336529] localhost kernel: ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 6.337428] localhost kernel: ata2.00: configured for UDMA/133
[ 6.337516] localhost kernel: scsi 3:0:0:0: Direct-Access ATA WDC WD10EZEX-00E 80.0 PQ: 0 ANSI: 5
[ 6.337907] localhost kernel: ata3.00: ATAPI: ASUS DRW-24F1ST a, 1.00, max UDMA/100
[ 6.338871] localhost kernel: ata3.00: configured for UDMA/100
[ 6.338951] localhost kernel: sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 6.338952] localhost kernel: sd 3:0:0:0: [sda] 4096-byte physical blocks
[ 6.338986] localhost kernel: sd 3:0:0:0: [sda] Write Protect is off
[ 6.338987] localhost kernel: sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.338997] localhost kernel: sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.339365] localhost kernel: ata4.00: supports DRM functions and may not be fully accessible
[ 6.340135] localhost kernel: scsi 4:0:0:0: CD-ROM ASUS DRW-24F1ST a 1.00 PQ: 0 ANSI: 5
[ 6.342538] localhost kernel: ata4.00: configured for UDMA/133
[ 6.346661] localhost kernel: ata6: SATA link down (SStatus 0 SControl 300)
[ 6.348669] localhost kernel: ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.349599] localhost kernel: ata5.00: ATA-9: SAMSUNG MZHPV256HDGL-00000, BXW2500Q, max UDMA/133
[ 6.349601] localhost kernel: ata5.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 6.349799] localhost kernel: ata5.00: configured for UDMA/133
[ 6.352024] localhost kernel: scsi 5:0:0:0: Direct-Access ATA Crucial_CT240M50 MU05 PQ: 0 ANSI: 5
[ 6.352122] localhost kernel: sd 5:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 6.352124] localhost kernel: sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 6.352160] localhost kernel: sd 5:0:0:0: [sdb] Write Protect is off
[ 6.352161] localhost kernel: sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.352163] localhost kernel: scsi 6:0:0:0: Direct-Access ATA SAMSUNG MZHPV256 BXW2 PQ: 0 ANSI: 5
[ 6.352175] localhost kernel: sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.352261] localhost kernel: sd 6:0:0:0: [sdc] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 6.352298] localhost kernel: sd 6:0:0:0: [sdc] Write Protect is off
[ 6.352300] localhost kernel: sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 6.352312] localhost kernel: sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.352433] localhost kernel: sdb: sdb1
[ 6.352549] localhost kernel: sd 5:0:0:0: [sdb] Attached SCSI disk
[ 6.353165] localhost kernel: sdc: sdc1 sdc2 sdc3
[ 6.353332] localhost kernel: sd 6:0:0:0: [sdc] Attached SCSI disk
[ 6.322862] localhost multipathd[186]: sdb: add path (uevent)
[ 6.367064] localhost kernel: sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.367066] localhost kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.367121] localhost kernel: sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 6.370367] localhost kernel: sda: sda1 sda2
[ 6.370585] localhost kernel: sd 3:0:0:0: [sda] Attached SCSI disk
[ 6.656675] localhost kernel: ata7: SATA link down (SStatus 0 SControl 300)
[ 6.623117] localhost multipathd[186]: sdc: add path (uevent)
[ 6.696170] localhost kernel: scsi 0:0:0:0: Direct-Access 8.07 PQ: 0 ANSI: 4
[ 6.696306] localhost kernel: scsi 1:0:0:0: Direct-Access Sony Storage Media PMAP PQ: 0 ANSI: 6
[ 6.697095] localhost kernel: sd 0:0:0:0: [sde] 30310400 512-byte logical blocks: (15.5 GB/14.4 GiB)
[ 6.697236] localhost kernel: sd 1:0:0:0: [sdd] 30373824 512-byte logical blocks: (15.5 GB/14.4 GiB)
[ 6.697373] localhost kernel: sd 1:0:0:0: [sdd] Write Protect is off
[ 6.697374] localhost kernel: sd 1:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 6.697526] localhost kernel: sd 1:0:0:0: [sdd] No Caching mode page found
[ 6.697541] localhost kernel: sd 1:0:0:0: [sdd] Assuming drive cache: write through
[ 6.697767] localhost kernel: sd 0:0:0:0: [sde] Write Protect is off
[ 6.697768] localhost kernel: sd 0:0:0:0: [sde] Mode Sense: 23 00 00 00
[ 6.698413] localhost kernel: sd 0:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 6.717118] localhost kernel: sdd: sdd1
[ 6.720338] localhost kernel: sd 1:0:0:0: [sdd] Attached SCSI removable disk
[ 6.754192] localhost kernel: sde: sde1
[ 6.756852] localhost kernel: sd 0:0:0:0: [sde] Attached SCSI removable disk
[ 6.742829] localhost multipathd[186]: sda: add path (uevent)
[ 6.833516] localhost multipathd[186]: sdd: add path (uevent)
[ 6.855154] localhost multipathd[186]: sde: add path (uevent)
[ 7.302925] localhost systemd[1]: Started dracut pre-trigger hook.
[ 7.303046] localhost systemd[1]: Starting udev Coldplug all Devices...
[ 7.311646] localhost systemd[1]: Started udev Coldplug all Devices.
[ 7.311802] localhost systemd[1]: Starting dracut initqueue hook...
[ 7.311917] localhost systemd[1]: Starting System Initialization.
[ 7.312053] localhost systemd[1]: Reached target System Initialization.
[ 7.312152] localhost systemd[1]: Starting Show Plymouth Boot Screen...
[ 7.323964] localhost systemd[1]: Started Show Plymouth Boot Screen.
[ 7.324136] localhost systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.324268] localhost systemd[1]: Starting Paths.
[ 7.324351] localhost systemd[1]: Reached target Paths.
[ 7.324429] localhost systemd[1]: Starting Forward Password Requests to Plymouth Directory Watch.
[ 7.324507] localhost systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 7.324582] localhost systemd[1]: Starting Basic System.
[ 7.324660] localhost systemd[1]: Reached target Basic System.
[ 7.335475] localhost systemd[1]: Reloading.
[ 7.354346] localhost systemd[1]: Mounting Configuration File System...
[ 7.356374] localhost systemd[1]: Mounted Configuration File System.
[ 7.376998] localhost multipathd[186]: sdc: add path (uevent)
[ 7.377164] localhost multipathd[186]: sdc: spurious uevent, path already in pathvec
[ 7.379785] localhost multipathd[186]: sda: add path (uevent)
[ 7.379878] localhost multipathd[186]: sda: spurious uevent, path already in pathvec
[ 7.382274] localhost multipathd[186]: sdb: add path (uevent)
[ 7.382358] localhost multipathd[186]: sdb: spurious uevent, path already in pathvec
[ 7.468493] localhost multipathd[186]: sde: add path (uevent)
[ 7.468583] localhost multipathd[186]: sde: spurious uevent, path already in pathvec
[ 7.523582] localhost multipathd[186]: sdd: add path (uevent)
[ 7.523670] localhost multipathd[186]: sdd: spurious uevent, path already in pathvec
[ 7.734807] localhost kernel: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 63.219898] localhost kernel: usb 3-5: USB disconnect, device number 2
[ 64.741613] localhost kernel: usb 3-5: new low-speed USB device number 5 using xhci_hcd
[ 64.909040] localhost kernel: usb 3-5: New USB device found, idVendor=046d, idProduct=c05a
[ 64.909042] localhost kernel: usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 64.909043] localhost kernel: usb 3-5: Product: USB Optical Mouse
[ 64.909044] localhost kernel: usb 3-5: Manufacturer: Logitech
[ 64.909109] localhost kernel: usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 64.910911] localhost kernel: input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input5
[ 64.911034] localhost kernel: hid-generic 0003:046D:C05A.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0
[ 124.911802] localhost kernel: usb 3-5: USB disconnect, device number 5
[ 126.433600] localhost kernel: usb 3-5: new low-speed USB device number 6 using xhci_hcd
[ 126.601046] localhost kernel: usb 3-5: New USB device found, idVendor=046d, idProduct=c05a
[ 126.601050] localhost kernel: usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 126.601052] localhost kernel: usb 3-5: Product: USB Optical Mouse
[ 126.601054] localhost kernel: usb 3-5: Manufacturer: Logitech
[ 126.601137] localhost kernel: usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 126.602961] localhost kernel: input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input6
[ 126.603127] localhost kernel: hid-generic 0003:046D:C05A.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0
[ 186.603788] localhost kernel: usb 3-5: USB disconnect, device number 6
[ 188.120500] localhost kernel: usb 3-5: new low-speed USB device number 7 using xhci_hcd
[ 188.287933] localhost kernel: usb 3-5: New USB device found, idVendor=046d, idProduct=c05a
[ 188.287936] localhost kernel: usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 188.287938] localhost kernel: usb 3-5: Product: USB Optical Mouse
[ 188.287939] localhost kernel: usb 3-5: Manufacturer: Logitech
[ 188.288013] localhost kernel: usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 188.289698] localhost kernel: input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input7
[ 188.289838] localhost kernel: hid-generic 0003:046D:C05A.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0
[ 191.597607] localhost dracut-initqueue[675]: Warning: Could not boot.
[ 191.603777] localhost dracut-initqueue[675]: Warning: /dev/root does not exist
[ 191.606238] localhost systemd[1]: Starting Dracut Emergency Shell...
Chi può dirmi dove sbaglio e come risolvere il problema?
grazie 1000
saluti
non riesco ad installare la distro centOS 7, quando faccio l'istallazione non riesce ad
trovare, credo l'hardisk. Devo installarlo in un disco M.2 GPT.
Ho creato una pendrive con rufus-2.2 inserendo il file .iso di centOS per sistemi GPT ma non funziona, ma con ubuntu, stessa installazione e stesso creazione della pendrive, tutto funziona benissimo.
Allego il log del risultato dell'istallazione di centOS:
[ 5.649346] localhost systemd[1]: Starting dracut pre-trigger hook...
[ 5.688590] localhost systemd-udevd[483]: starting version 208
[ 5.691956] localhost kernel: usb-storage 3-11:1.0: USB Mass Storage device detected
[ 5.691992] localhost kernel: scsi host0: usb-storage 3-11:1.0
[ 5.692037] localhost kernel: usb-storage 3-12:1.0: USB Mass Storage device detected
[ 5.692068] localhost kernel: scsi host1: usb-storage 3-12:1.0
[ 5.692093] localhost kernel: usbcore: registered new interface driver usb-storage
[ 5.653569] localhost dracut-pre-trigger[484]: rd.dm=0: removing DM RAID activation
[ 5.657638] localhost dracut-pre-trigger[484]: rd.md.imsm=0: no MD RAID for imsm/isw raids
[ 5.660729] localhost dracut-pre-trigger[484]: rd.md.ddf=0: no MD RAID for SNIA ddf raids
[ 5.668830] localhost dracut-pre-trigger[484]: rd.md=0: removing MD RAID activation
[ 5.740973] localhost kernel: wmi: Mapper loaded
[ 5.742646] localhost kernel: sdhci: Secure Digital Host Controller Interface driver
[ 5.742647] localhost kernel: sdhci: Copyright(c) Pierre Ossman
[ 5.759606] localhost kernel: pps_core: LinuxPPS API ver. 1 registered
[ 5.759608] localhost kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 5.760240] localhost kernel: PTP clock support registered
[ 5.762658] localhost kernel: libata version 3.00 loaded.
[ 5.763626] localhost kernel: e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 5.763628] localhost kernel: e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 5.763684] localhost kernel: [drm] Initialized drm 1.1.0 20060810
[ 5.763772] localhost kernel: e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 5.763791] localhost kernel: e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 5.772609] localhost kernel: alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 5.775609] localhost kernel: alg: No test for crc32 (crc32-pclmul)
[ 6.027390] localhost kernel: e1000e 0000:00:19.0 eth0: registered PHC clock
[ 6.027392] localhost kernel: e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 78:24:af:42:e9:3f
[ 6.027394] localhost kernel: e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 6.027417] localhost kernel: e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 6.027445] localhost kernel: ahci 0000:00:1f.2: version 3.0
[ 6.027533] localhost kernel: ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
[ 6.027560] localhost kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xe impl SATA mode
[ 6.027562] localhost kernel: ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 6.030918] localhost kernel: scsi host2: ahci
[ 6.031032] localhost kernel: scsi host3: ahci
[ 6.031091] localhost kernel: scsi host4: ahci
[ 6.031119] localhost kernel: scsi host5: ahci
[ 6.031132] localhost kernel: ata1: DUMMY
[ 6.031133] localhost kernel: ata2: SATA max UDMA/133 abar m2048@0xdfe39000 port 0xdfe39180 irq 48
[ 6.031135] localhost kernel: ata3: SATA max UDMA/133 abar m2048@0xdfe39000 port 0xdfe39200 irq 48
[ 6.031136] localhost kernel: ata4: SATA max UDMA/133 abar m2048@0xdfe39000 port 0xdfe39280 irq 48
[ 6.031209] localhost kernel: ahci 0000:02:00.0: irq 49 for MSI/MSI-X
[ 6.031488] localhost kernel: [drm] Memory usable by graphics device = 2048M
[ 6.031490] localhost kernel: checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 6.031491] localhost kernel: fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 6.031497] localhost kernel: Console: switching to colour dummy device 80x25
[ 6.031528] localhost kernel: [drm] Replacing VGA console driver
[ 6.041710] localhost kernel: ahci 0000:02:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 6.041712] localhost kernel: ahci 0000:02:00.0: flags: 64bit ncq led clo only pio ccc
[ 6.041855] localhost kernel: scsi host6: ahci
[ 6.041874] localhost kernel: ata5: SATA max UDMA/133 abar m8192@0xdfd00000 port 0xdfd00100 irq 49
[ 6.041963] localhost kernel: ahci 0000:08:00.0: irq 50 for MSI/MSI-X
[ 6.041974] localhost kernel: ahci: SSS flag set, parallel bus scan disabled
[ 6.042011] localhost kernel: ahci 0000:08:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 6.042012] localhost kernel: ahci 0000:08:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
[ 6.042187] localhost kernel: scsi host7: ahci
[ 6.042224] localhost kernel: scsi host8: ahci
[ 6.042239] localhost kernel: ata6: SATA max UDMA/133 abar m512@0xdfc00000 port 0xdfc00100 irq 50
[ 6.042241] localhost kernel: ata7: SATA max UDMA/133 abar m512@0xdfc00000 port 0xdfc00180 irq 50
[ 6.046667] localhost kernel: i915 0000:00:02.0: irq 51 for MSI/MSI-X
[ 6.046672] localhost kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.046672] localhost kernel: [drm] Driver supports precise vblank timestamp query.
[ 6.046682] localhost kernel: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.048719] localhost systemd-udevd[558]: renamed network interface eth0 to eno1
[ 6.183161] localhost kernel: fbcon: inteldrmfb (fb0) is primary device
[ 6.201833] localhost kernel: Console: switching to colour frame buffer device 240x67
[ 6.204468] localhost kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.204469] localhost kernel: i915 0000:00:02.0: registered panic notifier
[ 6.211881] localhost kernel: acpi device:17: registered as cooling_device13
[ 6.211901] localhost kernel: ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.211919] localhost kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 6.211955] localhost kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.335661] localhost kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.335673] localhost kernel: ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.335684] localhost kernel: ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.335943] localhost kernel: ata4.00: supports DRM functions and may not be fully accessible
[ 6.335960] localhost kernel: ata4.00: ATA-9: Crucial_CT240M500SSD1, MU05, max UDMA/133
[ 6.335961] localhost kernel: ata4.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 6.336528] localhost kernel: ata2.00: ATA-8: WDC WD10EZEX-00ER1A0, 80.00A80, max UDMA/133
[ 6.336529] localhost kernel: ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 6.337428] localhost kernel: ata2.00: configured for UDMA/133
[ 6.337516] localhost kernel: scsi 3:0:0:0: Direct-Access ATA WDC WD10EZEX-00E 80.0 PQ: 0 ANSI: 5
[ 6.337907] localhost kernel: ata3.00: ATAPI: ASUS DRW-24F1ST a, 1.00, max UDMA/100
[ 6.338871] localhost kernel: ata3.00: configured for UDMA/100
[ 6.338951] localhost kernel: sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 6.338952] localhost kernel: sd 3:0:0:0: [sda] 4096-byte physical blocks
[ 6.338986] localhost kernel: sd 3:0:0:0: [sda] Write Protect is off
[ 6.338987] localhost kernel: sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.338997] localhost kernel: sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.339365] localhost kernel: ata4.00: supports DRM functions and may not be fully accessible
[ 6.340135] localhost kernel: scsi 4:0:0:0: CD-ROM ASUS DRW-24F1ST a 1.00 PQ: 0 ANSI: 5
[ 6.342538] localhost kernel: ata4.00: configured for UDMA/133
[ 6.346661] localhost kernel: ata6: SATA link down (SStatus 0 SControl 300)
[ 6.348669] localhost kernel: ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.349599] localhost kernel: ata5.00: ATA-9: SAMSUNG MZHPV256HDGL-00000, BXW2500Q, max UDMA/133
[ 6.349601] localhost kernel: ata5.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 6.349799] localhost kernel: ata5.00: configured for UDMA/133
[ 6.352024] localhost kernel: scsi 5:0:0:0: Direct-Access ATA Crucial_CT240M50 MU05 PQ: 0 ANSI: 5
[ 6.352122] localhost kernel: sd 5:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 6.352124] localhost kernel: sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 6.352160] localhost kernel: sd 5:0:0:0: [sdb] Write Protect is off
[ 6.352161] localhost kernel: sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.352163] localhost kernel: scsi 6:0:0:0: Direct-Access ATA SAMSUNG MZHPV256 BXW2 PQ: 0 ANSI: 5
[ 6.352175] localhost kernel: sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.352261] localhost kernel: sd 6:0:0:0: [sdc] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 6.352298] localhost kernel: sd 6:0:0:0: [sdc] Write Protect is off
[ 6.352300] localhost kernel: sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 6.352312] localhost kernel: sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.352433] localhost kernel: sdb: sdb1
[ 6.352549] localhost kernel: sd 5:0:0:0: [sdb] Attached SCSI disk
[ 6.353165] localhost kernel: sdc: sdc1 sdc2 sdc3
[ 6.353332] localhost kernel: sd 6:0:0:0: [sdc] Attached SCSI disk
[ 6.322862] localhost multipathd[186]: sdb: add path (uevent)
[ 6.367064] localhost kernel: sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.367066] localhost kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.367121] localhost kernel: sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 6.370367] localhost kernel: sda: sda1 sda2
[ 6.370585] localhost kernel: sd 3:0:0:0: [sda] Attached SCSI disk
[ 6.656675] localhost kernel: ata7: SATA link down (SStatus 0 SControl 300)
[ 6.623117] localhost multipathd[186]: sdc: add path (uevent)
[ 6.696170] localhost kernel: scsi 0:0:0:0: Direct-Access 8.07 PQ: 0 ANSI: 4
[ 6.696306] localhost kernel: scsi 1:0:0:0: Direct-Access Sony Storage Media PMAP PQ: 0 ANSI: 6
[ 6.697095] localhost kernel: sd 0:0:0:0: [sde] 30310400 512-byte logical blocks: (15.5 GB/14.4 GiB)
[ 6.697236] localhost kernel: sd 1:0:0:0: [sdd] 30373824 512-byte logical blocks: (15.5 GB/14.4 GiB)
[ 6.697373] localhost kernel: sd 1:0:0:0: [sdd] Write Protect is off
[ 6.697374] localhost kernel: sd 1:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 6.697526] localhost kernel: sd 1:0:0:0: [sdd] No Caching mode page found
[ 6.697541] localhost kernel: sd 1:0:0:0: [sdd] Assuming drive cache: write through
[ 6.697767] localhost kernel: sd 0:0:0:0: [sde] Write Protect is off
[ 6.697768] localhost kernel: sd 0:0:0:0: [sde] Mode Sense: 23 00 00 00
[ 6.698413] localhost kernel: sd 0:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 6.717118] localhost kernel: sdd: sdd1
[ 6.720338] localhost kernel: sd 1:0:0:0: [sdd] Attached SCSI removable disk
[ 6.754192] localhost kernel: sde: sde1
[ 6.756852] localhost kernel: sd 0:0:0:0: [sde] Attached SCSI removable disk
[ 6.742829] localhost multipathd[186]: sda: add path (uevent)
[ 6.833516] localhost multipathd[186]: sdd: add path (uevent)
[ 6.855154] localhost multipathd[186]: sde: add path (uevent)
[ 7.302925] localhost systemd[1]: Started dracut pre-trigger hook.
[ 7.303046] localhost systemd[1]: Starting udev Coldplug all Devices...
[ 7.311646] localhost systemd[1]: Started udev Coldplug all Devices.
[ 7.311802] localhost systemd[1]: Starting dracut initqueue hook...
[ 7.311917] localhost systemd[1]: Starting System Initialization.
[ 7.312053] localhost systemd[1]: Reached target System Initialization.
[ 7.312152] localhost systemd[1]: Starting Show Plymouth Boot Screen...
[ 7.323964] localhost systemd[1]: Started Show Plymouth Boot Screen.
[ 7.324136] localhost systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.324268] localhost systemd[1]: Starting Paths.
[ 7.324351] localhost systemd[1]: Reached target Paths.
[ 7.324429] localhost systemd[1]: Starting Forward Password Requests to Plymouth Directory Watch.
[ 7.324507] localhost systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 7.324582] localhost systemd[1]: Starting Basic System.
[ 7.324660] localhost systemd[1]: Reached target Basic System.
[ 7.335475] localhost systemd[1]: Reloading.
[ 7.354346] localhost systemd[1]: Mounting Configuration File System...
[ 7.356374] localhost systemd[1]: Mounted Configuration File System.
[ 7.376998] localhost multipathd[186]: sdc: add path (uevent)
[ 7.377164] localhost multipathd[186]: sdc: spurious uevent, path already in pathvec
[ 7.379785] localhost multipathd[186]: sda: add path (uevent)
[ 7.379878] localhost multipathd[186]: sda: spurious uevent, path already in pathvec
[ 7.382274] localhost multipathd[186]: sdb: add path (uevent)
[ 7.382358] localhost multipathd[186]: sdb: spurious uevent, path already in pathvec
[ 7.468493] localhost multipathd[186]: sde: add path (uevent)
[ 7.468583] localhost multipathd[186]: sde: spurious uevent, path already in pathvec
[ 7.523582] localhost multipathd[186]: sdd: add path (uevent)
[ 7.523670] localhost multipathd[186]: sdd: spurious uevent, path already in pathvec
[ 7.734807] localhost kernel: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 63.219898] localhost kernel: usb 3-5: USB disconnect, device number 2
[ 64.741613] localhost kernel: usb 3-5: new low-speed USB device number 5 using xhci_hcd
[ 64.909040] localhost kernel: usb 3-5: New USB device found, idVendor=046d, idProduct=c05a
[ 64.909042] localhost kernel: usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 64.909043] localhost kernel: usb 3-5: Product: USB Optical Mouse
[ 64.909044] localhost kernel: usb 3-5: Manufacturer: Logitech
[ 64.909109] localhost kernel: usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 64.910911] localhost kernel: input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input5
[ 64.911034] localhost kernel: hid-generic 0003:046D:C05A.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0
[ 124.911802] localhost kernel: usb 3-5: USB disconnect, device number 5
[ 126.433600] localhost kernel: usb 3-5: new low-speed USB device number 6 using xhci_hcd
[ 126.601046] localhost kernel: usb 3-5: New USB device found, idVendor=046d, idProduct=c05a
[ 126.601050] localhost kernel: usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 126.601052] localhost kernel: usb 3-5: Product: USB Optical Mouse
[ 126.601054] localhost kernel: usb 3-5: Manufacturer: Logitech
[ 126.601137] localhost kernel: usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 126.602961] localhost kernel: input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input6
[ 126.603127] localhost kernel: hid-generic 0003:046D:C05A.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0
[ 186.603788] localhost kernel: usb 3-5: USB disconnect, device number 6
[ 188.120500] localhost kernel: usb 3-5: new low-speed USB device number 7 using xhci_hcd
[ 188.287933] localhost kernel: usb 3-5: New USB device found, idVendor=046d, idProduct=c05a
[ 188.287936] localhost kernel: usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 188.287938] localhost kernel: usb 3-5: Product: USB Optical Mouse
[ 188.287939] localhost kernel: usb 3-5: Manufacturer: Logitech
[ 188.288013] localhost kernel: usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 188.289698] localhost kernel: input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input7
[ 188.289838] localhost kernel: hid-generic 0003:046D:C05A.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0
[ 191.597607] localhost dracut-initqueue[675]: Warning: Could not boot.
[ 191.603777] localhost dracut-initqueue[675]: Warning: /dev/root does not exist
[ 191.606238] localhost systemd[1]: Starting Dracut Emergency Shell...
Chi può dirmi dove sbaglio e come risolvere il problema?
grazie 1000
saluti