Buonasera Sacarde,ti mostro i risultati da terminale su tuo consiglio con dmesg :
oshiba@Satellite ~ $ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-24-generic (buildd@roseapple) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005f6dffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005f6e0000-0x000000005f6e9fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000005f6ea000-0x000000005f6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000005f700000-0x000000005fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000f0005fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.34 present.
[ 0.000000] DMI: TOSHIBA Satellite M40X/EAL30, BIOS V1.60 06/09/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x5f6e0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FE0000000 write-back
[ 0.000000] 2 base 05F700000 mask FFFF00000 uncachable
[ 0.000000] 3 base 05F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 1527MB, range: 1MB, type UC
[ 0.000000] reg 3, base: 1528MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 1527M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 1527MB, range: 1MB, type UC
[ 0.000000] reg 3, base: 1528MB, range: 8MB, type UC
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[ 0.000000] [mem 0x37800000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[ 0.000000] [mem 0x34000000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01b88000, 0x01b88fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34b44000-0x36599fff]
[ 0.000000] ACPI: RSDP 000f6b70 000014 (v00 TOSCPL)
[ 0.000000] ACPI: RSDT 5f6e383f 000044 (v01 TOSCPL RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: APIC 5f6e9e88 000068 (v01 INTEL ALVISO 06040000 LOHR 0000005F)
[ 0.000000] ACPI: FACP 5f6e9ef0 000074 (v01 TOSCPL ALVISO 06040000 LOHR 00000032)
[ 0.000000] ACPI: DSDT 5f6e495f 005529 (v01 TOSCPL ALVISO 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 5f6fafc0 000040
[ 0.000000] ACPI: BOOT 5f6e9fd8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: MCFG 5f6e9f9c 00003C (v01 INTEL ALVISO 06040000 LOHR 0000005F)
[ 0.000000] ACPI: SSDT 5f6e430c 00064F (v01 SataRe SataPri 00001000 INTL 20030224)
[ 0.000000] ACPI: SSDT 5f6e3c7a 000692 (v01 SataRe SataSec 00001000 INTL 20030224)
[ 0.000000] ACPI: SSDT 5f6e3a9c 0001DE (v01 PmRef Cpu0Cst 00003001 INTL 20030224)
[ 0.000000] ACPI: SSDT 5f6e3883 000219 (v01 PmRef CpuPm 00003000 INTL 20030224)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 634MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x01b89000, 0x01b89fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x5f6dffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x5f6dffff]
[ 0.000000] On node 0 totalpages: 390782
[ 0.000000] free_area_init_node: node 0, pgdat c1990a80, node_mem_map f700e020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1270 pages used for memmap
[ 0.000000] HighMem zone: 162530 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] e820: [mem 0x60000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f6fe9000 s36096 r0 d21248 u57344
[ 0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 388998
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=d627e86b-0716-45db-9ba4-bad209c1ae87 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 3127032 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0005f6e0)
[ 0.000000] Memory: 1508044K/1563128K available (6507K kernel code, 641K rwdata, 2752K rodata, 872K init, 924K bss, 55084K reserved, 650120K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc19ae000 - 0xc1a88000 ( 872 kB)
[ 0.000000] .data : 0xc165b0b2 - 0xc19ad4c0 (3401 kB)
[ 0.000000] .text : 0xc1000000 - 0xc165b0b2 (6508 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6808000 soft=f680a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1396.431 MHz processor
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2792.86 BogoMIPS (lpj=5585724)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.004081] Security Framework initialized
[ 0.004120] AppArmor: AppArmor initialized
[ 0.004124] Yama: becoming mindful.
[ 0.004261] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004267] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004778] Initializing cgroup subsys memory
[ 0.004795] Initializing cgroup subsys devices
[ 0.004801] Initializing cgroup subsys freezer
[ 0.004806] Initializing cgroup subsys blkio
[ 0.004810] Initializing cgroup subsys perf_event
[ 0.004816] Initializing cgroup subsys hugetlb
[ 0.004865] Disabled fast string operations
[ 0.004878] mce: CPU supports 5 MCE banks
[ 0.004895] CPU0: Thermal monitoring enabled (TM1)
[ 0.004918] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.004918] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
[ 0.004918] tlb_flushall_shift: 6
[ 0.025250] ACPI: Core revision 20131115
[ 0.025259] TOSHIBA Satellite detected - force copy of DSDT to local memory
[ 0.025439] ACPI: Forced DSDT copy: length 0x05529 copied locally, original unmapped
[ 0.033131] ACPI: All ACPI Tables successfully acquired
[ 0.036014] ftrace: allocating 27695 entries in 55 pages
[ 0.052195] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.052665] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.093725] smpboot: CPU0: Intel(R) Celeron(R) M processor 1.40GHz (fam: 06, model: 0d, stepping: 08)
[ 0.096546] Performance Events: p6 PMU driver.
[ 0.096556] ... version: 0
[ 0.096559] ... bit width: 32
[ 0.096561] ... generic registers: 2
[ 0.096564] ... value mask: 00000000ffffffff
[ 0.096566] ... max period: 000000007fffffff
[ 0.096569] ... fixed-purpose events: 0
[ 0.096571] ... event mask: 0000000000000003
[ 0.099919] x86: Booted up 1 node, 1 CPUs
[ 0.099925] smpboot: Total of 1 processors activated (2792.86 BogoMIPS)
[ 0.100213] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.100421] devtmpfs: initialized
[ 0.100813] EVM: security.selinux
[ 0.100816] EVM: security.SMACK64
[ 0.100818] EVM: security.ima
[ 0.100820] EVM: security.capability
[ 0.100984] PM: Registering ACPI NVS region [mem 0x5f6ea000-0x5f6fffff] (90112 bytes)
[ 0.103267] pinctrl core: initialized pinctrl subsystem
[ 0.104095] regulator-dummy: no parameters
[ 0.104145] RTC time: 17:00:38, date: 10/18/14
[ 0.104231] NET: Registered protocol family 16
[ 0.104539] EISA bus registered
[ 0.104543] cpuidle: using governor ladder
[ 0.104547] cpuidle: using governor menu
[ 0.104692] ACPI: bus type PCI registered
[ 0.104696] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.104837] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.104843] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.104846] PCI: Using MMCONFIG for extended config space
[ 0.104849] PCI: Using configuration type 1 for base access
[ 0.107061] bio: create slab <bio-0> at 0
[ 0.107336] ACPI: Added _OSI(Module Device)
[ 0.107340] ACPI: Added _OSI(Processor Device)
[ 0.107344] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.107347] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.113063] ACPI: Interpreter enabled
[ 0.113082] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.113091] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.113116] ACPI: (supports S0 S3 S4 S5)
[ 0.113119] ACPI: Using IOAPIC for interrupt routing
[ 0.113163] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.113371] ACPI: No dock devices found.
[ 0.114735] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.114765] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.194120] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.194134] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.194144] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.195145] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.195150] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.195154] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.195159] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.195163] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.195168] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.195173] acpi PNP0A08:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored)
[ 0.195177] PCI: root bus 00: using default resources
[ 0.195442] PCI host bridge to bus 0000:00
[ 0.195449] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.195454] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.195458] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.195475] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[ 0.195641] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
[ 0.195657] pci 0000:00:02.0: reg 0x10: [mem 0xb0080000-0xb00fffff]
[ 0.195667] pci 0000:00:02.0: reg 0x14: [io 0x1800-0x1807]
[ 0.195677] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[ 0.195686] pci 0000:00:02.0: reg 0x1c: [mem 0xb0000000-0xb003ffff]
[ 0.195836] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
[ 0.195849] pci 0000:00:02.1: reg 0x10: [mem 0x00000000-0x0007ffff]
[ 0.196060] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.196124] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
[ 0.196250] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.196318] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[ 0.196381] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
[ 0.196502] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.196564] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[ 0.196628] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
[ 0.196748] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.196814] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[ 0.196877] pci 0000:00:1d.3: reg 0x20: [io 0x1880-0x189f]
[ 0.196997] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.197078] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.197107] pci 0000:00:1d.7: reg 0x10: [mem 0xb0040000-0xb00403ff]
[ 0.197226] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.197300] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.197366] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.197567] pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
[ 0.197592] pci 0000:00:1e.2: reg 0x10: [io 0x1c00-0x1cff]
[ 0.197608] pci 0000:00:1e.2: reg 0x14: [io 0x18c0-0x18ff]
[ 0.197623] pci 0000:00:1e.2: reg 0x18: [mem 0xb0040800-0xb00409ff]
[ 0.197638] pci 0000:00:1e.2: reg 0x1c: [mem 0xb0040400-0xb00404ff]
[ 0.197710] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.197835] pci 0000:00:1e.3: [8086:266d] type 00 class 0x070300
[ 0.197861] pci 0000:00:1e.3: reg 0x10: [io 0x2400-0x24ff]
[ 0.197876] pci 0000:00:1e.3: reg 0x14: [io 0x2000-0x207f]
[ 0.197969] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[ 0.198037] pci 0000:00:1e.3: System wakeup disabled by ACPI
[ 0.198111] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[ 0.198233] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.198247] pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
[ 0.198256] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.198391] pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180
[ 0.198416] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.198431] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.198446] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.198461] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.198476] pci 0000:00:1f.2: reg 0x20: [io 0x18b0-0x18bf]
[ 0.198540] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.198665] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
[ 0.198745] pci 0000:00:1f.3: reg 0x20: [io 0x20a0-0x20bf]
[ 0.198991] pci 0000:06:01.0: [10ec:8139] type 00 class 0x020000
[ 0.199021] pci 0000:06:01.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.199039] pci 0000:06:01.0: reg 0x14: [mem 0xb0116000-0xb01160ff]
[ 0.199152] pci 0000:06:01.0: supports D1 D2
[ 0.199157] pci 0000:06:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.199189] pci 0000:06:01.0: System wakeup disabled by ACPI
[ 0.199264] pci 0000:06:02.0: [168c:0013] type 00 class 0x020000
[ 0.199295] pci 0000:06:02.0: reg 0x10: [mem 0xb0100000-0xb010ffff]
[ 0.199496] pci 0000:06:04.0: [104c:8031] type 02 class 0x060700
[ 0.199526] pci 0000:06:04.0: reg 0x10: [mem 0xb0117000-0xb0117fff]
[ 0.199575] pci 0000:06:04.0: supports D1 D2
[ 0.199579] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.199676] pci 0000:06:04.2: [104c:8032] type 00 class 0x0c0010
[ 0.199706] pci 0000:06:04.2: reg 0x10: [mem 0xb0116800-0xb0116fff]
[ 0.199724] pci 0000:06:04.2: reg 0x14: [mem 0xb0110000-0xb0113fff]
[ 0.199843] pci 0000:06:04.2: supports D1 D2
[ 0.199847] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
[ 0.199942] pci 0000:06:04.3: [104c:8033] type 00 class 0x018000
[ 0.199971] pci 0000:06:04.3: reg 0x10: [mem 0xb0114000-0xb0115fff]
[ 0.200104] pci 0000:06:04.3: supports D1 D2
[ 0.200108] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
[ 0.200198] pci 0000:06:04.4: [104c:8034] type 00 class 0x080500
[ 0.200228] pci 0000:06:04.4: reg 0x10: [mem 0xb0118400-0xb01184ff]
[ 0.200245] pci 0000:06:04.4: reg 0x14: [mem 0xb0118000-0xb01180ff]
[ 0.200263] pci 0000:06:04.4: reg 0x18: [mem 0xb0116400-0xb01164ff]
[ 0.200364] pci 0000:06:04.4: supports D1 D2
[ 0.200367] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot
[ 0.200505] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode)
[ 0.200513] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.200520] pci 0000:00:1e.0: bridge window [mem 0xb0100000-0xb01fffff]
[ 0.200530] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.200535] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.200611] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 06-07] (conflicts with (null) [bus 06-07])
[ 0.200620] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 0a
[ 0.200625] pci_bus 0000:07: busn_res: can not insert [bus 07-0a] under [bus 06-07] (conflicts with (null) [bus 06-07])
[ 0.200633] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07]
[ 0.200648] pci_bus 0000:00: on NUMA node 0
[ 0.200990] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.201106] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.201219] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.201332] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.201444] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.201556] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.201668] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.201780] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.224318] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.224332] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.224403] Found 1 acpi root devices
[ 0.224470] ACPI : EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[ 0.224674] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.224683] vgaarb: loaded
[ 0.224686] vgaarb: bridge control possible 0000:00:02.0
[ 0.225153] SCSI subsystem initialized
[ 0.225248] libata version 3.00 loaded.
[ 0.225301] ACPI: bus type USB registered
[ 0.225345] usbcore: registered new interface driver usbfs
[ 0.225363] usbcore: registered new interface driver hub
[ 0.225404] usbcore: registered new device driver usb
[ 0.225605] PCI: Using ACPI for IRQ routing
[ 0.236530] PCI: pci_cache_line_size set to 64 bytes
[ 0.236619] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.236623] e820: reserve RAM buffer [mem 0x5f6e0000-0x5fffffff]
[ 0.236818] NetLabel: Initializing
[ 0.236821] NetLabel: domain hash size = 128
[ 0.236824] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.236848] NetLabel: unlabeled traffic allowed by default
[ 0.237215] hpet clockevent registered
[ 0.237222] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.237230] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.237238] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.239339] Switched to clocksource hpet
[ 0.250386] AppArmor: AppArmor Filesystem Enabled
[ 0.250471] pnp: PnP ACPI init
[ 0.250514] ACPI: bus type PNP registered
[ 0.250708] system 00:00: [io 0xfe00-0xfe7f] has been reserved
[ 0.250714] system 00:00: [io 0xfe80-0xfeff] has been reserved
[ 0.250719] system 00:00: [io 0xff00-0xff7f] has been reserved
[ 0.250726] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.250731] system 00:00: [mem 0xf0000000-0xf0003fff] has been reserved
[ 0.250736] system 00:00: [mem 0xf0004000-0xf0004fff] has been reserved
[ 0.250742] system 00:00: [mem 0xf0005000-0xf0005fff] has been reserved
[ 0.250747] system 00:00: [mem 0xf0008000-0xf000bfff] has been reserved
[ 0.250752] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.250760] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251127] pnp 00:01: [dma 4]
[ 0.251185] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.251241] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.251322] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.251462] system 00:04: [io 0x0800-0x080f] has been reserved
[ 0.251468] system 00:04: [io 0x1000-0x107f] could not be reserved
[ 0.251473] system 00:04: [io 0x1180-0x11bf] has been reserved
[ 0.251478] system 00:04: [io 0x1640-0x164f] has been reserved
[ 0.251484] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251583] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.276121] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.276189] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.276238] pnp: PnP ACPI: found 8 devices
[ 0.276241] ACPI: bus type PNP unregistered
[ 0.276247] PnPBIOS: Disabled by ACPI PNP
[ 0.313838] pci 0000:06:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.313849] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 06-07] add_size 4000000
[ 0.313862] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[ 0.313869] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.313881] pci 0000:00:1e.0: BAR 15: assigned [mem 0x60000000-0x63ffffff pref]
[ 0.313888] pci 0000:00:02.1: BAR 0: assigned [mem 0x64000000-0x6407ffff]
[ 0.313902] pci 0000:06:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.313907] pci 0000:06:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.313912] pci 0000:06:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.313916] pci 0000:06:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.313922] pci 0000:06:04.0: BAR 15: assigned [mem 0x60000000-0x63ffffff pref]
[ 0.313929] pci 0000:06:04.0: BAR 16: assigned [mem 0x68000000-0x6bffffff]
[ 0.313934] pci 0000:06:04.0: BAR 13: assigned [io 0x3400-0x34ff]
[ 0.313938] pci 0000:06:04.0: BAR 14: assigned [io 0x3800-0x38ff]
[ 0.313943] pci 0000:06:04.0: CardBus bridge to [bus 07-0a]
[ 0.313948] pci 0000:06:04.0: bridge window [io 0x3400-0x34ff]
[ 0.313956] pci 0000:06:04.0: bridge window [io 0x3800-0x38ff]
[ 0.313964] pci 0000:06:04.0: bridge window [mem 0x60000000-0x63ffffff pref]
[ 0.313972] pci 0000:06:04.0: bridge window [mem 0x68000000-0x6bffffff]
[ 0.313980] pci 0000:00:1e.0: PCI bridge to [bus 06-07]
[ 0.313986] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.313995] pci 0000:00:1e.0: bridge window [mem 0xb0100000-0xb01fffff]
[ 0.314002] pci 0000:00:1e.0: bridge window [mem 0x60000000-0x63ffffff pref]
[ 0.314014] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.314018] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.314023] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
[ 0.314027] pci_bus 0000:06: resource 1 [mem 0xb0100000-0xb01fffff]
[ 0.314032] pci_bus 0000:06: resource 2 [mem 0x60000000-0x63ffffff pref]
[ 0.314036] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
[ 0.314040] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[ 0.314045] pci_bus 0000:07: resource 0 [io 0x3400-0x34ff]
[ 0.314049] pci_bus 0000:07: resource 1 [io 0x3800-0x38ff]
[ 0.314054] pci_bus 0000:07: resource 2 [mem 0x60000000-0x63ffffff pref]
[ 0.314058] pci_bus 0000:07: resource 3 [mem 0x68000000-0x6bffffff]
[ 0.314131] NET: Registered protocol family 2
[ 0.314440] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.314481] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.314548] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.314602] TCP: reno registered
[ 0.314607] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.314625] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.314763] NET: Registered protocol family 1
[ 0.314793] pci 0000:00:02.0: Boot video device
[ 0.316462] PCI: CLS 32 bytes, default 64
[ 0.316580] Trying to unpack rootfs image as initramfs...
[ 1.328336] Freeing initrd memory: 26968K (f4b44000 - f659a000)
[ 1.328590] Simple Boot Flag at 0x36 set to 0x1
[ 1.328791] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 1.328906] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.328911] Scanning for low memory corruption every 60 seconds
[ 1.329450] Initialise system trusted keyring
[ 1.329546] audit: initializing netlink socket (disabled)
[ 1.329573] type=2000 audit(1413651639.328:1): initialized
[ 1.371136] bounce pool size: 64 pages
[ 1.371157] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.374126] VFS: Disk quotas dquot_6.5.2
[ 1.374222] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.375167] fuse init (API version 7.22)
[ 1.375320] msgmni has been set to 1728
[ 1.375437] Key type big_key registered
[ 1.375881] Key type asymmetric registered
[ 1.375886] Asymmetric key parser 'x509' registered
[ 1.375960] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.376039] io scheduler noop registered
[ 1.376042] io scheduler deadline registered (default)
[ 1.376099] io scheduler cfq registered
[ 1.376319] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.376352] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.376445] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 1.376447] vesafb: scrolling: redraw
[ 1.376452] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.376870] vesafb: framebuffer at 0xc0000000, mapped to 0xf8480000, using 4032k, total 4032k
[ 1.428994] Console: switching to colour frame buffer device 160x50
[ 1.480941] fb0: VESA VGA frame buffer device
[ 1.480994] intel_idle: does not run on family 6 model 13
[ 1.481008] ipmi message handler version 39.2
[ 1.481238] ACPI: AC Adapter [ACAD] (on-line)
[ 1.481421] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.481450] ACPI: Lid Switch [LID0]
[ 1.481522] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.481529] ACPI: Power Button [PWRB]
[ 1.481631] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.481636] ACPI: Power Button [PWRF]
[ 1.481840] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.481857] ACPI: acpi_idle registered with cpuidle
[ 1.482048] GHES: HEST is not enabled!
[ 1.482211] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.485287] Linux agpgart interface v0.103
[ 1.485393] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 1.485471] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.485827] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.486017] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.486288] isapnp: Scanning for PnP cards...
[ 1.538538] brd: module loaded
[ 1.539989] loop: module loaded
[ 1.540279] ata_piix 0000:00:1f.2: version 2.13
[ 1.584147] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.585721] ACPI: Battery Slot [BAT1] (battery present)
[ 1.585773] scsi0 : ata_piix
[ 1.585890] scsi1 : ata_piix
[ 1.585962] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[ 1.585966] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[ 1.586625] libphy: Fixed MDIO Bus: probed
[ 1.586851] tun: Universal TUN/TAP device driver, 1.6
[ 1.586854] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.586937] PPP generic driver version 2.4.2
[ 1.587010] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.587019] ehci-pci: EHCI PCI platform driver
[ 1.587252] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.587269] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.587291] ehci-pci 0000:00:1d.7: debug port 1
[ 1.591213] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.591353] ehci-pci 0000:00:1d.7: irq 23, io mem 0xb0040000
[ 1.635081] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.635221] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.635226] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.635230] usb usb1: Product: EHCI Host Controller
[ 1.635235] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[ 1.635238] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.635433] hub 1-0:1.0: USB hub found
[ 1.635449] hub 1-0:1.0: 8 ports detected
[ 1.635804] ehci-platform: EHCI generic platform driver
[ 1.635825] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.635828] ohci-pci: OHCI PCI platform driver
[ 1.635849] ohci-platform: OHCI generic platform driver
[ 1.635863] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.636087] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.636097] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.636131] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.636224] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.636229] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.636233] usb usb2: Product: UHCI Host Controller
[ 1.636237] usb usb2: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 1.636241] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.636416] hub 2-0:1.0: USB hub found
[ 1.636429] hub 2-0:1.0: 2 ports detected
[ 1.636751] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.636760] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.636811] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.636893] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.636898] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.636902] usb usb3: Product: UHCI Host Controller
[ 1.636906] usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 1.636910] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.637084] hub 3-0:1.0: USB hub found
[ 1.637097] hub 3-0:1.0: 2 ports detected
[ 1.637415] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.637425] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.637473] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.637554] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.637559] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.637563] usb usb4: Product: UHCI Host Controller
[ 1.637567] usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 1.637571] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.637745] hub 4-0:1.0: USB hub found
[ 1.637758] hub 4-0:1.0: 2 ports detected
[ 1.638071] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.638085] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.638133] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 1.638222] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.638227] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.638231] usb usb5: Product: UHCI Host Controller
[ 1.638235] usb usb5: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 1.638239] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.638403] hub 5-0:1.0: USB hub found
[ 1.682028] hub 5-0:1.0: 2 ports detected
[ 1.682303] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.683097] i8042: Detected active multiplexing controller, rev 1.1
[ 1.683191] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.683204] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.683251] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.683291] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.683335] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.683524] mousedev: PS/2 mouse device common for all mice
[ 1.683788] rtc_cmos 00:05: RTC can wake from S4
[ 1.683977] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.684036] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.684193] device-mapper: uevent: version 1.0.3
[ 1.684318] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.684379] platform eisa.0: Probing EISA bus 0
[ 1.684393] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.684399] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.684404] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.684437] platform eisa.0: EISA: Detected 0 cards
[ 1.684451] cpufreq-nforce2: No nForce2 chipset.
[ 1.684458] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.684747] TCP: cubic registered
[ 1.684954] NET: Registered protocol family 10
[ 1.685351] NET: Registered protocol family 17
[ 1.685372] Key type dns_resolver registered
[ 1.685659] Using IPI No-Shortcut mode
[ 1.685804] Loading compiled-in X.509 certificates
[ 1.693385] Loaded X.509 cert 'Magrathea: Glacier signing key: 77d70e1df42996dc92b01d759d3e8562ea32a1c7'
[ 1.693412] registered taskstats version 1
[ 1.693852] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.697772] Key type trusted registered
[ 1.701154] Key type encrypted registered
[ 1.704408] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.704416] IMA: No TPM chip found, activating TPM-bypass!
[ 1.704805] regulator-dummy: disabling
[ 1.704874] Magic number: 2:143:37
[ 1.704913] bdi 7:2: hash matches
[ 1.705047] rtc_cmos 00:05: setting system clock to 2014-10-18 17:00:40 UTC (1413651640)
[ 1.705160] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.705164] EDD information not available.
[ 1.705236] PM: Hibernation image not present or could not be loaded.
[ 1.793796] ata2.00: ATAPI: MATSHITADVD-RAM UJ-831S, 1.90, max UDMA/33
[ 1.837567] isapnp: No Plug & Play device found
[ 1.837612] ata1.00: ATA-8: WDC WD2500BEVE-00WZT0, 01.01A01, max UDMA/100
[ 1.837617] ata1.00: 488397168 sectors, multi 16: LBA48
[ 1.837623] ata1.00: applying bridge limits
[ 1.844556] ata2.00: configured for UDMA/33
[ 1.845089] ata1.00: configured for UDMA/100
[ 1.845301] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVE-0 01.0 PQ: 0 ANSI: 5
[ 1.845597] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.845858] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.845950] sd 0:0:0:0: [sda] Write Protect is off
[ 1.845955] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.845996] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.847582] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-831S 1.90 PQ: 0 ANSI: 5
[ 1.849880] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.849885] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.850046] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.850227] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.858736] sda: sda1 sda2 sda3
[ 1.859230] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.859866] Freeing unused kernel memory: 872K (c19ae000 - c1a88000)
[ 1.859947] Write protecting the kernel text: 6512k
[ 1.860136] Write protecting the kernel read-only data: 2756k
[ 1.860139] NX-protecting the kernel data: 5776k
[ 1.888394] systemd-udevd[96]: starting version 204
[ 2.043470] [drm] Initialized drm 1.1.0 20060810
[ 2.052573] sdhci: Secure Digital Host Controller Interface driver
[ 2.052581] sdhci: Copyright(c) Pierre Ossman
[ 2.128985] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.129034] 8139cp 0000:06:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 2.140109] sdhci-pci 0000:06:04.4: SDHCI controller found [104c:8034] (rev 0)
[ 2.140845] sdhci-pci 0000:06:04.4: dummy supplies not allowed
[ 2.140850] mmc0: no vqmmc regulator found
[ 2.140854] sdhci-pci 0000:06:04.4: dummy supplies not allowed
[ 2.140857] mmc0: no vmmc regulator found
[ 2.141615] mmc0: SDHCI controller on PCI [0000:06:04.4] using PIO
[ 2.141638] sdhci-pci 0000:06:04.4: dummy supplies not allowed
[ 2.141640] mmc1: no vqmmc regulator found
[ 2.141644] sdhci-pci 0000:06:04.4: dummy supplies not allowed
[ 2.141646] mmc1: no vmmc regulator found
[ 2.141740] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO
[ 2.141758] sdhci-pci 0000:06:04.4: dummy supplies not allowed
[ 2.141761] mmc2: no vqmmc regulator found
[ 2.141764] sdhci-pci 0000:06:04.4: dummy supplies not allowed
[ 2.141767] mmc2: no vmmc regulator found
[ 2.142094] mmc2: SDHCI controller on PCI [0000:06:04.4] using PIO
[ 2.144927] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 2.166675] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[ 2.224789] firewire_ohci 0000:06:04.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 2.227459] 8139too 0000:06:01.0 eth0: RealTek RTL8139 at 0x00013000, 00:0f:b0:67:b2:6e, IRQ 21
[ 2.252455] random: nonblocking pool is initialized
[ 2.337376] [drm] Memory usable by graphics device = 256M
[ 2.337389] checking generic (c0000000 3f0000) vs hw (c0000000 10000000)
[ 2.337394] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 2.337462] Console: switching to colour dummy device 80x25
[ 2.342244] usb 2-1: New USB device found, idVendor=046d, idProduct=c408
[ 2.342255] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.342261] usb 2-1: Product: USB Trackball
[ 2.342267] usb 2-1: Manufacturer: Logitech
[ 2.351421] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.351430] [drm] Driver supports precise vblank timestamp query.
[ 2.351613] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.473486] [drm] initialized overlay support
[ 2.643279] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.681428] usbcore: registered new interface driver usbhid
[ 2.681436] usbhid: USB HID core driver
[ 2.699589] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input12
[ 2.701346] hid-generic 0003:046D:C408.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1d.0-1/input0
[ 2.725555] irq 18: nobody cared (try booting with the "irqpoll" option)
[ 2.725563] CPU: 0 PID: 104 Comm: systemd-udevd Not tainted 3.13.0-24-generic #46-Ubuntu
[ 2.725567] Hardware name: TOSHIBA Satellite M40X/EAL30, BIOS V1.60 06/09/2005
[ 2.725570] 00000000 00000000 f6809f54 c164b873 f69e4480 f6809f74 c10a78e9 c182a4ec
[ 2.725580] 00000012 f6fee4b4 c1969f20 f69e4480 00000012 f6809f98 c10a7ce3 00000000
[ 2.725588] 00000005 9ec1a488 fffeddb1 f69e4480 f69e44d4 00000000 f6809fd4 c10a5c35
[ 2.725596] Call Trace:
[ 2.725609] [<c164b873>] dump_stack+0x41/0x52
[ 2.725618] [<c10a78e9>] __report_bad_irq+0x29/0xd0
[ 2.725624] [<c10a7ce3>] note_interrupt+0x153/0x1a0
[ 2.725629] [<c10a5c35>] handle_irq_event_percpu+0xc5/0x1a0
[ 2.725634] [<c10a5d41>] handle_irq_event+0x31/0x50
[ 2.725639] [<c10a8660>] ? unmask_irq+0x30/0x30
[ 2.725643] [<c10a86ae>] handle_fasteoi_irq+0x4e/0xe0
[ 2.725646] <IRQ> [<c165a26c>] ? do_IRQ+0x3c/0xb0
[ 2.725656] [<c165a033>] ? common_interrupt+0x33/0x38
[ 2.725729] [<f8c600d8>] ? gmbus_xfer+0x168/0x570 [i915]
[ 2.725737] [<c12f7d5d>] ? delay_tsc+0x3d/0x70
[ 2.725742] [<c12f7cbb>] ? __const_udelay+0x1b/0x20
[ 2.725781] [<f8c2a9ff>] ? pipe_dsl_stopped+0x4f/0x70 [i915]
[ 2.725822] [<f8c30a01>] ? intel_wait_for_pipe_off+0x111/0x1b0 [i915]
[ 2.725862] [<f8c30b2e>] ? intel_disable_pipe+0x8e/0xa0 [i915]
[ 2.725903] [<f8c31f5b>] ? i9xx_crtc_disable+0xfb/0x2f0 [i915]
[ 2.725952] [<f8c6c2a2>] ? gen4_read32+0x32/0xb0 [i915]
[ 2.725994] [<f8c3e023>] ? intel_modeset_setup_hw_state+0x903/0xae0 [i915]
[ 2.726030] [<f894dff8>] ? drm_mode_config_reset+0x98/0xb0 [drm]
[ 2.726072] [<f8c3e235>] ? intel_modeset_gem_init+0x35/0x40 [i915]
[ 2.726105] [<f8c03beb>] ? i915_driver_load+0xb4b/0xdd0 [i915]
[ 2.726136] [<f8c00df0>] ? i915_switcheroo_set_state+0xa0/0xa0 [i915]
[ 2.726160] [<f8949cbb>] ? drm_dev_register+0x8b/0x1a0 [drm]
[ 2.726179] [<f894b7ae>] ? drm_get_pci_dev+0x7e/0x120 [drm]
[ 2.726186] [<c11d00e0>] ? do_task_stat+0x840/0xd10
[ 2.726217] [<f8c005ea>] ? i915_pci_probe+0x3a/0x80 [i915]
[ 2.726224] [<c132d13f>] ? pci_device_probe+0x6f/0xc0
[ 2.726230] [<c11da615>] ? sysfs_create_link+0x25/0x40
[ 2.726239] [<c1407925>] ? driver_probe_device+0x105/0x380
[ 2.726244] [<c132d092>] ? pci_match_device+0xb2/0xc0
[ 2.726249] [<c1407c51>] ? __driver_attach+0x71/0x80
[ 2.726254] [<c1407be0>] ? __device_attach+0x40/0x40
[ 2.726259] [<c1405d87>] ? bus_for_each_dev+0x47/0x80
[ 2.726264] [<c140738e>] ? driver_attach+0x1e/0x20
[ 2.726269] [<c1407be0>] ? __device_attach+0x40/0x40
[ 2.726274] [<c1406fe7>] ? bus_add_driver+0x157/0x230
[ 2.726279] [<c1408219>] ? driver_register+0x59/0xe0
[ 2.726285] [<c132bb72>] ? __pci_register_driver+0x32/0x40
[ 2.726304] [<f894b945>] ? drm_pci_init+0xf5/0x100 [drm]
[ 2.726310] [<f8ab7000>] ? 0xf8ab6fff
[ 2.726341] [<f8ab7062>] ? i915_init+0x62/0x64 [i915]
[ 2.726347] [<c1002122>] ? do_one_initcall+0xd2/0x190
[ 2.726352] [<f8ab7000>] ? 0xf8ab6fff
[ 2.726360] [<c104c87f>] ? set_memory_nx+0x5f/0x70
[ 2.726366] [<c164764a>] ? set_section_ro_nx+0x54/0x59
[ 2.726373] [<c10c3e9a>] ? load_module+0x111a/0x18e0
[ 2.726380] [<c10c47c5>] ? SyS_finit_module+0x75/0xc0
[ 2.726387] [<c11396db>] ? vm_mmap_pgoff+0x7b/0xa0
[ 2.726394] [<c1659b4d>] ? sysenter_do_call+0x12/0x28
[ 2.726397] handlers:
[ 2.726402] [<c14a1640>] usb_hcd_irq
[ 2.726405] Disabling IRQ #18
[ 3.011788] fbcon: inteldrmfb (fb0) is primary device
[ 3.052054] Console: switching to colour frame buffer device 160x50
[ 3.059615] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.059619] i915 0000:00:02.0: registered panic notifier
[ 3.059781] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 3.059812] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 3.060386] acpi device:08: registered as cooling_device1
[ 3.061134] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input14
[ 3.062013] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.256929] input: ALPS PS/2 Device as /devices/platform/i8042/serio4/input/input13
[ 3.277855] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input11
[ 3.947186] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 14.862887] Adding 3071996k swap on /dev/sda1. Priority:-1 extents:1 across:3071996k FS
[ 14.988409] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.275394] systemd-udevd[334]: starting version 204
[ 15.522454] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 15.598969] lp: driver loaded but no devices found
[ 15.667891] ppdev: user-space parallel port driver
[ 16.706279] intel_rng: FWH not detected
[ 16.728830] cfg80211: Calling CRDA to update world regulatory domain
[ 16.914319] yenta_cardbus 0000:06:04.0: CardBus bridge found [1179:ff00]
[ 16.914349] yenta_cardbus 0000:06:04.0: Enabling burst memory read transactions
[ 16.914357] yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC interrupts to PCI
[ 16.914361] yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI
[ 16.914369] yenta_cardbus 0000:06:04.0: TI: mfunc 0x10aa1b22, devctl 0x66
[ 16.914676] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 16.914686] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.914691] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 16.914698] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.914701] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 16.914707] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.914710] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 17.153786] yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x04f8, PCI irq 16
[ 17.153797] yenta_cardbus 0000:06:04.0: Socket status: 30000006
[ 17.153804] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 17.153821] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff]
[ 17.153826] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff:
[ 17.155135] excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff
[ 17.322859] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0xb0100000-0xb01fffff]
[ 17.322869] pcmcia_socket pcmcia_socket0: cs: memory probe 0xb0100000-0xb01fffff:
[ 17.322875] excluding 0xb0100000-0xb011ffff
[ 17.322895] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0x60000000-0x63ffffff pref]
[ 17.322900] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x63ffffff:
[ 17.322920] excluding 0x60000000-0x63ffffff
[ 17.463156] device-mapper: multipath: version 1.6.0 loaded
[ 17.527237] ath5k 0000:06:02.0: registered as 'phy0'
[ 17.687035] Bluetooth: Core ver 2.17
[ 17.687158] NET: Registered protocol family 31
[ 17.687162] Bluetooth: HCI device and connection manager initialized
[ 17.687177] Bluetooth: HCI socket layer initialized
[ 17.687182] Bluetooth: L2CAP socket layer initialized
[ 17.687192] Bluetooth: SCO socket layer initialized
[ 17.799378] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.799388] Bluetooth: BNEP filters: protocol multicast
[ 17.799404] Bluetooth: BNEP socket layer initialized
[ 17.801594] Bluetooth: RFCOMM TTY layer initialized
[ 17.801617] Bluetooth: RFCOMM socket layer initialized
[ 17.801627] Bluetooth: RFCOMM ver 1.11
[ 18.258232] init: cups main process (540) killed by HUP signal
[ 18.258260] init: cups main process ended, respawning
[ 19.467639] init: failsafe main process (625) killed by TERM signal
[ 20.178183] cfg80211: World regulatory domain updated:
[ 20.178194] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.178198] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.178202] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.178205] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.178209] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.178212] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.316186] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 20.317627] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 20.318395] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 20.318777] excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 20.319139] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 20.319723] clean.
[ 20.319746] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 20.323140] clean.
[ 20.323210] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 20.323217] excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff
[ 20.323259] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 20.323283] clean.
[ 20.323306] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 20.323325] excluding 0x60000000-0x60ffffff
[ 20.323350] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 20.330794] clean.
[ 20.561728] ath: EEPROM regdomain: 0x64
[ 20.561736] ath: EEPROM indicates we should expect a direct regpair map
[ 20.561742] ath: Country alpha2 being used: 00
[ 20.561744] ath: Regpair used: 0x64
[ 20.584624] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 20.586123] ath5k: phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
[ 20.628968] intel8x0_measure_ac97_clock: measured 55966 usecs (2696 samples)
[ 20.628977] intel8x0: clocking to 48000
[ 21.517435] init: samba-ad-dc main process (785) terminated with status 1
[ 21.571146] 8139too 0000:06:01.0 eth0: link down
[ 21.571291] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.572243] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.588966] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.589676] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.042660] wlan0: authenticate with e0:91:f5:5a:5a:8f
[ 23.055369] wlan0: send auth to e0:91:f5:5a:5a:8f (try 1/3)
[ 23.056923] wlan0: authenticated
[ 23.058842] ath5k 0000:06:02.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 23.060206] wlan0: associate with e0:91:f5:5a:5a:8f (try 1/3)
[ 23.063563] wlan0: RX AssocResp from e0:91:f5:5a:5a:8f (capab=0x431 status=0 aid=3)
[ 23.064161] wlan0: associated
[ 23.064179] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 23.101704] wlan0: deauthenticating from e0:91:f5:5a:5a:8f by local choice (reason=2)
[ 23.102319] cfg80211: Calling CRDA to update world regulatory domain
[ 23.107434] cfg80211: World regulatory domain updated:
[ 23.107444] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 23.107448] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.107452] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.107455] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 23.107459] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.107462] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.112913] wlan0: authenticate with e0:91:f5:5a:5a:8f
[ 23.113156] wlan0: send auth to e0:91:f5:5a:5a:8f (try 1/3)
[ 23.114585] wlan0: authenticated
[ 23.123057] ath5k 0000:06:02.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 23.124244] wlan0: associate with e0:91:f5:5a:5a:8f (try 1/3)
[ 23.127607] wlan0: RX AssocResp from e0:91:f5:5a:5a:8f (capab=0x431 status=0 aid=3)
[ 23.128124] wlan0: associated
[ 25.888770] init: plymouth-upstart-bridge main process ended, respawning
[ 25.916000] init: plymouth-upstart-bridge main process ended, respawning
[ 36.027050] ACPI : EC: GPE storm detected(10 GPEs), transactions will use polling mode
toshiba@Satellite ~ $
Per me è tutto quasi incomprensibile.
Digitando /var/log/syslog nel terminale mi restituisce "accesso negato" anche come utente root (sudo su).
Non faccio nulla per farla ripartire,prima ho staccato il cavo LAN e ho cliccato su rete in basso a destra ed ho cercato la mia rete (NETGEAR) dopodichè s'è connesso senza mancamenti.
Ieri invece non ne voleva sapere sia che fosse ad un metro dal router sia che fossi in camera a circa 30 metri dal router.
Io vedo come si comporta,poi in settimana lo restituisco,magari andrà ......
Grazie ugualmente.
Saluti
vBulletin® v3.6.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.