XF86Config per DUAL HEAD

[dosaggio]

Ciao a tutti,

ho qualche difficoltà a far funzionare una radeon VE,con due monitor identici in DUal HEad, su GNOME (Mandrake8.2).
Ho modificato il file XF86Config come segue....e poi lancio X con l'estensione xinerama : startx -- +xinerama.

Naturalmente non funge e mi mostra lo stesso output su entrambi i monitor.

Se qualcuno può darni una dritta...
Il file è questo:

XF86Config
---------------



# File generated by XFdrake.

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection



# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

Section "Files"

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.

FontPath "unix/:-1"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom

# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail

Option "Xinerama"
Option "BlankTime" "5"
Option "StandbyTime" "10"
Option "SuspendTime" "15"
Option "OffTime" "20"



EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "Keyboard"

Protocol "Standard"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
#Protocol "Xqueue"

AutoRepeat 250 30

# Let the server do the NumLock processing. This should only be
# required when using pre-R6 clients
#ServerNumLock

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#Xleds "1 2 3"

#To set the LeftAlt to Meta, RightAlt key to ModeShift,
#RightCtl key to Compose, and ScrollLock key to ModeLock:

LeftAlt Meta
RightAlt Meta
ScrollLock Compose
RightCtl Control

# To disable the XKEYBOARD extension, uncomment XkbDisable.

# XkbDisable

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# XkbModel "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# XkbModel "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# XkbLayout "de"
# or:
# XkbLayout "de"
# XkbVariant "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# XkbOptions "ctrl:swapcaps"

# These are the default XKB settings for XFree86
# XkbRules "xfree86"
# XkbModel "pc101"
# XkbLayout "us"
# XkbVariant ""
# XkbOptions ""

XkbKeycodes "xfree86"
XkbTypes "default"
XkbCompat "default"
XkbSymbols "us(pc105)"
XkbGeometry "pc"
XkbRules "xfree86"
XkbModel "pc105"
XkbLayout "it"

EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "Pointer"
Protocol "MouseManPlusPS/2"
Device "/dev/psaux"
ZAxisMapping 4 5
# Emulate3Buttons
# Emulate3Timeout 50

# ChordMiddle is an option for some 3-button Logitech mice

# ChordMiddle

EndSection



# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
Identifier "monitor0"
VendorName "Unknown"
ModelName "Unknown"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-61


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 56-75


# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.

# These two are equivalent

# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode
# 640x480, 60.0Hz; hfreq=31.469000, vfreq=59.939999
ModeLine "640x480" 25.17 640 648 744 784 480 482 484 509 -hsync -vsync
# 640x480, 67.0Hz
# 640x480, 72.0Hz; hfreq=37.861000, vfreq=72.808998
ModeLine "640x480" 31.50 640 656 696 816 480 481 484 504 -hsync -vsync
# 640x480, 75.0Hz; hfreq=37.500000, vfreq=75.000000
ModeLine "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480, 75.0Hz; hfreq=37.500000, vfreq=75.000000
ModeLine "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
# 720x400, 70.0Hz
# 720x400, 88.0Hz
# 800x600, 60.0Hz; hfreq=37.879002, vfreq=60.317001
ModeLine "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600, 75.0Hz; hfreq=46.875000, vfreq=75.000000
ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600, 75.0Hz; hfreq=46.875000, vfreq=75.000000
ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
# 832x624, 75.0Hz
# 1024x768, 87.0iHz
# 1024x768, 70.0Hz; hfreq=56.476002, vfreq=70.069000
ModeLine "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768, 75.0Hz; hfreq=60.022999, vfreq=75.028999
ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768, 75.0Hz; hfreq=60.022999, vfreq=75.028999
ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1280x1024, 75.0Hz; hfreq=79.975998, vfreq=75.025002
ModeLine "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync

# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.

# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace

# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync

# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync
# 1152x864 @ 89 Hz interlaced, 44 kHz hsync
ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace

# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync

# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync

# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace

# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
# 1400x1050 @ 60 Hz, 65.5 kHz
ModeLine "1400x1050" 122.0 1400 1488 1640 1880 1050 1052 1064 1082 +HSync +VSync

# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
# 1152x864 @ 78 Hz, 70.8 kHz hsync
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908

# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908

# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064

# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
# 1400x1050 @ 75 Hz, 82.2 kHz hsync
ModeLine "1400x1050" 155.8 1400 1464 1784 1912 1050 1052 1064 1090 +HSync +VSync

# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync
# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
# 1600x1200 @ 85 Hz, 106.3 kHz hsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync

# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync

# 1920x1440 @ 60 Hz, 90.0 kHz hsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -HSync +VSync
# 1920x1440 @ 75 Hz, 112.5kHz hsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -HSync +VSync

# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync


# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.

# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan


# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616


EndSection


Section "Monitor"
Identifier "monitor1"
VendorName "Unknown"
ModelName "Unknown"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-61


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 56-75


# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.

# These two are equivalent

# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode
# 640x480, 60.0Hz; hfreq=31.469000, vfreq=59.939999
ModeLine "640x480" 25.17 640 648 744 784 480 482 484 509 -hsync -vsync
# 640x480, 67.0Hz
# 640x480, 72.0Hz; hfreq=37.861000, vfreq=72.808998
ModeLine "640x480" 31.50 640 656 696 816 480 481 484 504 -hsync -vsync
# 640x480, 75.0Hz; hfreq=37.500000, vfreq=75.000000
ModeLine "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480, 75.0Hz; hfreq=37.500000, vfreq=75.000000
ModeLine "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
# 720x400, 70.0Hz
# 720x400, 88.0Hz
# 800x600, 60.0Hz; hfreq=37.879002, vfreq=60.317001
ModeLine "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600, 75.0Hz; hfreq=46.875000, vfreq=75.000000
ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600, 75.0Hz; hfreq=46.875000, vfreq=75.000000
ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
# 832x624, 75.0Hz
# 1024x768, 87.0iHz
# 1024x768, 70.0Hz; hfreq=56.476002, vfreq=70.069000
ModeLine "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768, 75.0Hz; hfreq=60.022999, vfreq=75.028999
ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768, 75.0Hz; hfreq=60.022999, vfreq=75.028999
ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1280x1024, 75.0Hz; hfreq=79.975998, vfreq=75.025002
ModeLine "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync

# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.

# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace

# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync

# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync
# 1152x864 @ 89 Hz interlaced, 44 kHz hsync
ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace

# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync

# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync

# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace

# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
# 1400x1050 @ 60 Hz, 65.5 kHz
ModeLine "1400x1050" 122.0 1400 1488 1640 1880 1050 1052 1064 1082 +HSync +VSync

# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
# 1152x864 @ 78 Hz, 70.8 kHz hsync
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908

# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908

# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064

# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
# 1400x1050 @ 75 Hz, 82.2 kHz hsync
ModeLine "1400x1050" 155.8 1400 1464 1784 1912 1050 1052 1064 1090 +HSync +VSync

# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync
# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
# 1600x1200 @ 85 Hz, 106.3 kHz hsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync

# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync

# 1920x1440 @ 60 Hz, 90.0 kHz hsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -HSync +VSync
# 1920x1440 @ 75 Hz, 112.5kHz hsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -HSync +VSync

# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync


# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.

# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan


# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616


EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
Identifier "Generic VGA"
Chipset "generic"
EndSection

Section "Device"
Identifier "ATI Radeon VE 0"
VendorName "Unknown"
BoardName "Unknown"
# Chipset "ati"
# Clock lines
BusID "PCI:1:0:0"
Screen 0

# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"

Option "power_saver"
EndSection


Section "Device"
Identifier "ATI Radeon VE 1"
VendorName "Unknown"
BoardName "Unknown"
# Chipset "ati"
# Clock lines
BusID "PCI:1:0:0"
Screen 1

# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"

Option "power_saver"
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************


# The Colour SVGA server

Section "Screen"
Driver "svga"
Device "Generic VGA"
Monitor "monitor1"
Subsection "Display"
Depth 8
Modes "320x200"
ViewPort 0 0
EndSubsection
EndSection

Section "Screen"
Driver "vga16"
Device "Generic VGA"
Monitor "monitor1"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection

Section "Screen"
Driver "vga2"
Device "Generic VGA"
Monitor "monitor1"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection

Section "Screen"
Identifier "Screen 0"
Driver "accel"
Device "ATI Radeon VE 0"
Monitor "monitor0"
DefaultColorDepth 32
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection

Section "Screen"
Identifier "Screen 0"
Driver "fbdev"
Device "ATI Radeon VE 0"
Monitor "monitor0"
DefaultColorDepth 32
Subsection "Display"
Depth 8
Modes "default"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "default"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "default"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "default"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "default"
ViewPort 0 0
EndSubsection
EndSection



Section "Screen"
Identifier "Screen 1"
Driver "accel"
Device "ATI Radeon VE 1"
Monitor "monitor1"
DefaultColorDepth 32
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection

Section "Screen"
Identifier "Screen 1"
Driver "fbdev"
Device "ATI Radeon VE 1"
Monitor "monitor1"
DefaultColorDepth 32
Subsection "Display"
Depth 8
Modes "default"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "default"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "default"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "default"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "default"
ViewPort 0 0
EndSubsection
EndSection

**********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.

Screen 0 "Screen 0"
Screen 0 "Screen 1" Leftof "Screen 0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

[ilsensine]

xinerama è implementato nell'xfree 4, il cui file di configurazione è XF86Config-4.

[dosaggio]

azz...informazione fondamentale, grazie :-)

Hm...più o meno farò le stesse modifiche, dici che vanno ??

Ciao.

[ilsensine]

Non saprei, non ho mai provato xinerama...da quello che leggo, funziona bene ed è semplice da configurare. Fammi sapere

[dosaggio]

ok, farò qualche prova.
Grazie.

[dosaggio]

niente da fare....il log mi dice sempre "screen1" inesistente....

[ilsensine]

Ad averci 2 schede video mi piacerebbe provare xinerama...
Mi puoi postare il file diconfigurazione modificato?

[dosaggio]

Mah non credo servirebbe a molto postarlo perchè non funziona.
In rete cmq. se ne trovano diversi. Il mio XF86Config-4 è molto simile all'XF86Config che ho postato sopra ed è per una UNICA scheda video DUAL HEAD...sebbene per 2 schede dovrebbe essere molto simile.

Il concetto è quello di creare le sezioni MONITOR/DEVICE/SCREEN per entrambi i monitor ed entrambe le schede video, esattamente come puoi vedere nel file postato sopra.

Poi, come vedi, occorre aggiungere alcuni identificativi ed una stringa alla sezione server layout....e qualche option, compresa xinerama, come si legge nell'how2 su xinerama.

Uno dei problemi che ho è quello di identificare il bus pci, in quanto il comando XFree86 -scanpic non mi da risposta.



Metto quì il file XF86Config-4 originale (1 radeon ve dualhead, mandrake 8.2, 2 monitor identici) nella speranza che qualche anima pia mi aiuti a modificarlo.



# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

Section "Files"

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.

FontPath "unix/:-1"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom

# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"

Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"

EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "InputDevice"

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "MouseManPlusPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection



Section "Module"

# This loads the DBE extension module.
Load "dbe"

# This loads the Video for Linux module.
Load "v4l"

Load "glx"
Load "dri"


# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

SubSection "extmod"
#Option "omit xfree86-dga"
EndSubSection

# This loads the Type1 and FreeType font modules

Load "type1"
Load "freetype"
EndSection


Section "DRI"
Mode 0666
EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
Identifier "monitor1"
VendorName "Unknown"
ModelName "Unknown"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-61


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 56-75


# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616


EndSection



# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection

Section "Device"
Identifier "ATI Radeon"
VendorName "Unknown"
BoardName "Unknown"
Driver "radeon"
# VideoRam 32768
# Clock lines


# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"

Option "AGPMode" "1"
Option "DPMS" "on"
EndSection



# **********************************************************************
# Screen sections
# **********************************************************************


Section "Screen"
Identifier "screen1"
Device "ATI Radeon"
Monitor "monitor1"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x400"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection


Section "ServerLayout"
Identifier "layout1"
Screen "screen1"

InputDevice "Mouse1" "CorePointer"

InputDevice "Keyboard1" "CoreKeyboard"
EndSection

[ilsensine]

Uno dei problemi che ho è quello di identificare il bus pci, in quanto il comando XFree86 -scanpic non mi da risposta
Magari XFree86 -scanpci la dà ;)

Il file sembra corretto, sei sicuro che stai usando l'xfree 4? (X -version) In tal caso sarebbe utile che riportassi il file di log di X (/var/log/XFree86.0.log). nb Allega i file invece di incollarli nei messaggi, è più comodo per chi li legge

[dosaggio]

ok,
l'0pzione è -scanpci ...ma non funge (sopra avevo fatto errore battitura).

Xfree è il 4.2 con accelerazione 3D (quello che ti fa istallare Mdk8.2).

Purtroppo allegare file troppo grandi non è possibile, mi dispiace.

Io provo a metterli lo stesso sotto e mi scuso per le difficoltà di lettura che potresti avere.
(sempre che tu abbia voglia di leggerlo).


Prima metto XF86Config-4, per il dual head. Da notare che per un singolo monitor funziona benissimo. E' sufficiente togliere le sezioni ripetute per device, monitor e screen...ed impostare un solo schermo nella sezione serverlayout.

Section "ServerLayout"
Identifier "layout1"

Screen 0 "Screen0" 0 0
Screen 1 "Screen1" LeftOf "Screen0"

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Option "xinerama"

EndSection



Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"

FontPath "unix/:-1"
EndSection



Section "ServerFlags"
AllowMouseOpenFail
EndSection



Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection


Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "MouseManPlusPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# Option "ChordMiddle"
EndSection



Section "Module"
Load "dbe"
Load "v4l"
Load "glx"
Load "dri"

SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection

Load "type1"
Load "freetype"
EndSection


Section "DRI"
Mode 0666
EndSection




Section "Monitor"
Identifier "monitor1"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30-61
VertRefresh 56-75


ModeLine "1024x768@75Hz" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync


EndSection


Section "Monitor"
Identifier "monitor2"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30-61
VertRefresh 56-75


ModeLine "1024x768@75Hz" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync


EndSection




Section "Device"
Identifier "ATI Radeon"
VendorName "Unknown"
BoardName "Unknown"
Driver "radeon"
# VideoRam 32768
# Clock lines

Option "AGPMode" "2"
Option "DPMS" "on"
BusID "PCI:1:5:0"
Screen 0

EndSection


Section "Device"
Identifier "ATI Radeon 1"
VendorName "Unknown"
BoardName "Unknown"
Driver "radeon"
# VideoRam 32768
# Clock lines

Option "AGPMode" "2"
Option "DPMS" "on"
BusID "PCI:1:5:0"
Screen 1


EndSection


Section "Screen"
Identifier "Screen0"
Device "ATI Radeon"
Monitor "monitor1"
DefaultColorDepth 24



Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection


Section "Screen"
Identifier "Screen1"
Device "ATI Radeon 1"
Monitor "monitor2"
DefaultColorDepth 24



Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection






Se poi vuoi dare un occhiata (mi riscuso per la lunghezza) eccoti il Xfree86.0.log
Nota il fatal server error alla fine.

Saluti e grazie.



XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18-1mdksmp i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Jun 8 02:22:58 2002
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "layout1"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "monitor1"
(**) | |-->Device "ATI Radeon"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "monitor2"
(**) | |-->Device "ATI Radeon 1"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "250 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "it"
(**) XKB: layout: "it"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:-1"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
(**) Option "Xinerama"
(**) Xinerama: enabled
(--) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80003850, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1022,700e card 0000,0000 rev 13 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1022,700f card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0686 card 1106,0686 rev 40 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:07:4: chip 1106,3057 card 1106,3057 rev 40 class 0c,05,00 hdr 00
(II) PCI: 00:09:0: chip 9004,5078 card 0000,0000 rev 01 class 01,00,00 hdr 00
(II) PCI: 00:0c:0: chip 1102,0002 card 1102,8027 rev 08 class 04,01,00 hdr 80
(II) PCI: 00:0c:1: chip 1102,7002 card 1102,0020 rev 08 class 09,80,00 hdr 80
(II) PCI: 00:0d:0: chip 10ec,8029 card 0000,0000 rev 00 class 02,00,00 hdr 00
(II) PCI: 00:10:0: chip 105a,0d30 card 105a,4d33 rev 02 class 01,04,00 hdr 00
(II) PCI: 01:05:0: chip 1002,5159 card 1002,013a rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0e (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0x00009000 - 0x000090ff (0x100) IX[B]
[1] -1 0x00009400 - 0x000094ff (0x100) IX[B]
[2] -1 0x00009800 - 0x000098ff (0x100) IX[B]
[3] -1 0x00009c00 - 0x00009cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xec000000 - 0xedffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:5:0) ATI Radeon VE QY rev 0, Mem @ 0xe0000000/27, 0xed000000/16, I/O @ 0x9000/8
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xef000000 - 0xef01ffff (0x20000) MX[B]
[1] -1 0xef021000 - 0xef021fff (0x1000) MX[B]
[2] -1 0xef020000 - 0xef020fff (0x1000) MX[B]
[3] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[4] -1 0xed000000 - 0xed00ffff (0x10000) MX[B](B)
[5] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[6] -1 0x0000e000 - 0x0000e03f (0x40) IX[B]
[7] -1 0x0000dc00 - 0x0000dc03 (0x4) IX[B]
[8] -1 0x0000d800 - 0x0000d807 (0x8) IX[B]
[9] -1 0x0000d400 - 0x0000d403 (0x4) IX[B]
[10] -1 0x0000d000 - 0x0000d007 (0x8) IX[B]
[11] -1 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[12] -1 0x0000c800 - 0x0000c807 (0x8) IX[B]
[13] -1 0x0000c400 - 0x0000c41f (0x20) IX[B]
[14] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[15] -1 0x0000a800 - 0x0000a81f (0x20) IX[B]
[16] -1 0x0000a400 - 0x0000a40f (0x10) IX[B]
[17] -1 0x0000a000 - 0x0000a003 (0x4) IX[B]
[18] -1 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xef000000 - 0xef01ffff (0x20000) MX[B]
[1] -1 0xef021000 - 0xef021fff (0x1000) MX[B]
[2] -1 0xef020000 - 0xef020fff (0x1000) MX[B]
[3] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[4] -1 0xed000000 - 0xed00ffff (0x10000) MX[B](B)
[5] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[6] -1 0x0000e000 - 0x0000e03f (0x40) IX[B]
[7] -1 0x0000dc00 - 0x0000dc03 (0x4) IX[B]
[8] -1 0x0000d800 - 0x0000d807 (0x8) IX[B]
[9] -1 0x0000d400 - 0x0000d403 (0x4) IX[B]
[10] -1 0x0000d000 - 0x0000d007 (0x8) IX[B]
[11] -1 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[12] -1 0x0000c800 - 0x0000c807 (0x8) IX[B]
[13] -1 0x0000c400 - 0x0000c41f (0x20) IX[B]
[14] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[15] -1 0x0000a800 - 0x0000a81f (0x20) IX[B]
[16] -1 0x0000a400 - 0x0000a40f (0x10) IX[B]
[17] -1 0x0000a000 - 0x0000a003 (0x4) IX[B]
[18] -1 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xef000000 - 0xef01ffff (0x20000) MX[B]
[6] -1 0xef021000 - 0xef021fff (0x1000) MX[B]
[7] -1 0xef020000 - 0xef020fff (0x1000) MX[B]
[8] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[9] -1 0xed000000 - 0xed00ffff (0x10000) MX[B](B)
[10] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0x0000e000 - 0x0000e03f (0x40) IX[B]
[14] -1 0x0000dc00 - 0x0000dc03 (0x4) IX[B]
[15] -1 0x0000d800 - 0x0000d807 (0x8) IX[B]
[16] -1 0x0000d400 - 0x0000d403 (0x4) IX[B]
[17] -1 0x0000d000 - 0x0000d007 (0x8) IX[B]
[18] -1 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[19] -1 0x0000c800 - 0x0000c807 (0x8) IX[B]
[20] -1 0x0000c400 - 0x0000c41f (0x20) IX[B]
[21] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[22] -1 0x0000a800 - 0x0000a81f (0x20) IX[B]
[23] -1 0x0000a400 - 0x0000a40f (0x10) IX[B]
[24] -1 0x0000a000 - 0x0000a003 (0x4) IX[B]
[25] -1 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.0.1
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 4.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 6.4.7
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) v4l driver for Video4Linux
(II) ATI: ATI driver (version 6.4.7) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI),
ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP),
ATI Radeon Mobility LZ (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 8500 BB (AGP), ATI Radeon 7500 QW (AGP)
(II) Primary Device is: PCI 01:05:0
(--) Chipset ATI Radeon VE QY (AGP) found
(--) Chipset ATI Radeon VE QY (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xef000000 - 0xef01ffff (0x20000) MX[B]
[6] -1 0xef021000 - 0xef021fff (0x1000) MX[B]
[7] -1 0xef020000 - 0xef020fff (0x1000) MX[B]
[8] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[9] -1 0xed000000 - 0xed00ffff (0x10000) MX[B](B)
[10] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0x0000e000 - 0x0000e03f (0x40) IX[B]
[14] -1 0x0000dc00 - 0x0000dc03 (0x4) IX[B]
[15] -1 0x0000d800 - 0x0000d807 (0x8) IX[B]
[16] -1 0x0000d400 - 0x0000d403 (0x4) IX[B]
[17] -1 0x0000d000 - 0x0000d007 (0x8) IX[B]
[18] -1 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[19] -1 0x0000c800 - 0x0000c807 (0x8) IX[B]
[20] -1 0x0000c400 - 0x0000c41f (0x20) IX[B]
[21] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[22] -1 0x0000a800 - 0x0000a81f (0x20) IX[B]
[23] -1 0x0000a400 - 0x0000a40f (0x10) IX[B]
[24] -1 0x0000a000 - 0x0000a003 (0x4) IX[B]
[25] -1 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xef000000 - 0xef01ffff (0x20000) MX[B]
[6] -1 0xef021000 - 0xef021fff (0x1000) MX[B]
[7] -1 0xef020000 - 0xef020fff (0x1000) MX[B]
[8] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[9] -1 0xed000000 - 0xed00ffff (0x10000) MX[B](B)
[10] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[11] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x0000e000 - 0x0000e03f (0x40) IX[B]
[17] -1 0x0000dc00 - 0x0000dc03 (0x4) IX[B]
[18] -1 0x0000d800 - 0x0000d807 (0x8) IX[B]
[19] -1 0x0000d400 - 0x0000d403 (0x4) IX[B]
[20] -1 0x0000d000 - 0x0000d007 (0x8) IX[B]
[21] -1 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[22] -1 0x0000c800 - 0x0000c807 (0x8) IX[B]
[23] -1 0x0000c400 - 0x0000c41f (0x20) IX[B]
[24] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[25] -1 0x0000a800 - 0x0000a81f (0x20) IX[B]
[26] -1 0x0000a400 - 0x0000a40f (0x10) IX[B]
[27] -1 0x0000a000 - 0x0000a003 (0x4) IX[B]
[28] -1 0x00009000 - 0x000090ff (0x100) IX[B](B)
[29] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[30] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) RADEON(0): PCI bus 1 card 5 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "2"
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon VE QY (AGP)" (ChipID = 0x5159)
(--) RADEON(0): Linear framebuffer at 0xe0000000
(--) RADEON(0): MMIO registers at 0xed000000
(--) RADEON(0): VideoRAM: 32768 kByte (64-bit DDR SDRAM)
(II) RADEON(0): Primary Display == Type 1
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.5
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): I2C device "DDC:ddc2" registered.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C EDID Info:
(II) RADEON(0): Manufacturer: PHL Model: 805 Serial#: 28159
(II) RADEON(0): Year: 2002 Week: 2
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V
(II) RADEON(0): Sync: Separate Composite SyncOnGreen
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 30 vert.: 22
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.597 redY: 0.343 greenX: 0.316 greenY: 0.566
(II) RADEON(0): blueX: 0.153 blueY: 0.131 whiteX: 0.310 whiteY: 0.328
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 65.0 MHz Image Size: 304 x 228 mm
(II) RADEON(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Serial No: HD 028159
(II) RADEON(0): Monitor name: PHILIPS 150S
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 61 kHz, PixClock max 80 MHz
(II) RADEON(0): End of DDC Monitor info

(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=12500 max=35000; xclk=18300
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): monitor1: Using hsync range of 30.00-61.00 kHz
(II) RADEON(0): monitor1: Using vrefresh range of 56.00-75.00 Hz
(II) RADEON(0): Clock range: 12.50 to 350.00 MHz
(II) RADEON(0): Not using mode "1024x768@75Hz" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x350" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x175" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x200" (vrefresh out of range)
(II) RADEON(0): Not using default mode "720x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "360x200" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x240" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "400x300" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "512x384" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (hsync out of range)
(II) RADEON(0): Not using default mode "1152x864" (hsync out of range)
(II) RADEON(0): Not using default mode "576x432" (hsync out of range)
(WW) (1280x960,monitor1) mode clock 108MHz exceeds DDC maximum 80MHz
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (hsync out of range)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (hsync out of range)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (hsync out of range)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (hsync out of range)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (hsync out of range)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (hsync out of range)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (hsync out of range)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (hsync out of range)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (hsync out of range)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (hsync out of range)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (hsync out of range)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (hsync out of range)
(II) RADEON(0): Not using default mode "1600x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "800x512" (hsync out of range)
(--) RADEON(0): Virtual size is 1024x768 (pitch 1024)
(**) RADEON(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) RADEON(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) RADEON(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) RADEON(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) RADEON(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) RADEON(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(--) RADEON(0): Display dimensions: (300, 220) mm
(--) RADEON(0): DPI set to (86, 88)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(**) RADEON(0): Using AGP 2x mode
(II) RADEON(0): Depth moves disabled by default
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Reloading /usr/X11R6/lib/modules/libvgahw.a
(II) RADEON(1): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) RADEON(1): PCI bus 1 card 5 func 0
(**) RADEON(1): Depth 24, (--) framebuffer bpp 32
(II) RADEON(1): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(1): Default visual is TrueColor
(**) RADEON(1): Option "AGPMode" "2"
(==) RADEON(1): RGB weight 888
(II) RADEON(1): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) RADEON(1): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(1): Chipset: "ATI Radeon VE QY (AGP)" (ChipID = 0x5159)
(--) RADEON(1): Linear framebuffer at 0xe0000000
(--) RADEON(1): MMIO registers at 0xed000000
(--) RADEON(1): VideoRAM: 16384 kByte (64-bit DDR SDRAM)
(II) RADEON(1): Secondary Display == Type 1
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Reloading /usr/X11R6/lib/modules/libi2c.a
(II) RADEON(1): I2C bus "DDC" initialized.
(II) RADEON(1): I2C device "DDC:ddc2" registered.
(II) RADEON(1): I2C device "DDC:ddc2" removed.
(II) RADEON(1): I2C device "DDC:ddc2" registered.
(II) RADEON(1): I2C device "DDC:ddc2" removed.
(II) RADEON(1): I2C EDID Info:
(II) RADEON(1): Manufacturer: PHL Model: 805 Serial#: 1842
(II) RADEON(1): Year: 2002 Week: 2
(II) RADEON(1): EDID Version: 1.3
(II) RADEON(1): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(1): Sync: Separate Composite SyncOnGreen
(II) RADEON(1): Max H-Image Size [cm]: horiz.: 30 vert.: 23
(II) RADEON(1): Gamma: 2.50
(II) RADEON(1): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(1): redX: 0.630 redY: 0.340 greenX: 0.300 greenY: 0.600
(II) RADEON(1): blueX: 0.140 blueY: 0.100 whiteX: 0.320 whiteY: 0.340
(II) RADEON(1): Supported VESA Video Modes:
(II) RADEON(1): 720x400@70Hz
(II) RADEON(1): 640x480@60Hz
(II) RADEON(1): 640x480@67Hz
(II) RADEON(1): 640x480@72Hz
(II) RADEON(1): 640x480@75Hz
(II) RADEON(1): 800x600@56Hz
(II) RADEON(1): 800x600@60Hz
(II) RADEON(1): 800x600@72Hz
(II) RADEON(1): 800x600@75Hz
(II) RADEON(1): 832x624@75Hz
(II) RADEON(1): 1024x768@60Hz
(II) RADEON(1): 1024x768@70Hz
(II) RADEON(1): 1024x768@75Hz
(II) RADEON(1): Manufacturer's mask: 0
(II) RADEON(1): Supported Future Video Modes:
(II) RADEON(1): #0: hsize: 640 vsize 480 refresh: 60 vid: 16433
(II) RADEON(1): #1: hsize: 640 vsize 480 refresh: 75 vid: 20273
(II) RADEON(1): #2: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) RADEON(1): #3: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) RADEON(1): #4: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) RADEON(1): Supported additional Video Mode:
(II) RADEON(1): clock: 31.5 MHz Image Size: 307 x 230 mm
(II) RADEON(1): h_active: 640 h_sync: 656 h_sync_end 696 h_blank_end 832 h_border: 16
(II) RADEON(1): v_active: 480 v_sync: 481 v_sync_end 484 v_blanking: 520 v_border: 16
(II) RADEON(1): Serial No: HD 001842
(II) RADEON(1): Monitor name: PHILIPS 150S
(II) RADEON(1): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 61 kHz, PixClock max 80 MHz
(II) RADEON(1): End of DDC Monitor info

(II) RADEON(1): PLL parameters: rf=2700 rd=12 min=12500 max=35000; xclk=18300
(==) RADEON(1): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(1): monitor2: Using hsync range of 30.00-61.00 kHz
(II) RADEON(1): monitor2: Using vrefresh range of 56.00-75.00 Hz
(II) RADEON(1): Clock range: 12.50 to 350.00 MHz
(II) RADEON(1): Not using mode "1024x768@75Hz" (vrefresh out of range)
(II) RADEON(1): Not using default mode "640x350" (vrefresh out of range)
(II) RADEON(1): Not using default mode "320x175" (vrefresh out of range)
(II) RADEON(1): Not using default mode "640x400" (vrefresh out of range)
(II) RADEON(1): Not using default mode "320x200" (vrefresh out of range)
(II) RADEON(1): Not using default mode "720x400" (vrefresh out of range)
(II) RADEON(1): Not using default mode "360x200" (vrefresh out of range)
(II) RADEON(1): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(1): Not using default mode "320x240" (vrefresh out of range)
(II) RADEON(1): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(1): Not using default mode "400x300" (vrefresh out of range)
(II) RADEON(1): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(1): Not using default mode "512x384" (vrefresh out of range)
(II) RADEON(1): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(1): Not using default mode "512x384" (hsync out of range)
(II) RADEON(1): Not using default mode "1152x864" (hsync out of range)
(II) RADEON(1): Not using default mode "576x432" (hsync out of range)
(WW) (1280x960,monitor2) mode clock 108MHz exceeds DDC maximum 80MHz
(II) RADEON(1): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(1): Not using default mode "640x480" (hsync out of range)
(II) RADEON(1): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(1): Not using default mode "640x512" (hsync out of range)
(II) RADEON(1): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(1): Not using default mode "640x512" (hsync out of range)
(II) RADEON(1): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(1): Not using default mode "640x512" (hsync out of range)
(II) RADEON(1): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(1): Not using default mode "800x600" (hsync out of range)
(II) RADEON(1): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(1): Not using default mode "800x600" (hsync out of range)
(II) RADEON(1): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(1): Not using default mode "800x600" (hsync out of range)
(II) RADEON(1): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(1): Not using default mode "800x600" (hsync out of range)
(II) RADEON(1): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(1): Not using default mode "800x600" (hsync out of range)
(II) RADEON(1): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(1): Not using default mode "896x672" (hsync out of range)
(II) RADEON(1): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(1): Not using default mode "896x672" (hsync out of range)
(II) RADEON(1): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(1): Not using default mode "928x696" (hsync out of range)
(II) RADEON(1): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(1): Not using default mode "928x696" (hsync out of range)
(II) RADEON(1): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(1): Not using default mode "960x720" (hsync out of range)
(II) RADEON(1): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(1): Not using default mode "960x720" (hsync out of range)
(II) RADEON(1): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(1): Not using default mode "700x525" (hsync out of range)
(II) RADEON(1): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(1): Not using default mode "700x525" (hsync out of range)
(II) RADEON(1): Not using default mode "1600x1024" (hsync out of range)
(II) RADEON(1): Not using default mode "800x512" (hsync out of range)
(--) RADEON(1): Virtual size is 1024x768 (pitch 1024)
(**) RADEON(1): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) RADEON(1): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) RADEON(1): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) RADEON(1): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) RADEON(1): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) RADEON(1): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(--) RADEON(1): Display dimensions: (300, 230) mm
(--) RADEON(1): DPI set to (86, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Reloading /usr/X11R6/lib/modules/libfb.a
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Reloading /usr/X11R6/lib/modules/libramdac.a
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Reloading /usr/X11R6/lib/modules/libxaa.a
(**) RADEON(1): Using AGP 2x mode
(II) RADEON(1): Depth moves disabled by default
(!!) RADEON(1): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? Yes, I do.
(II) LoadModule: "rac"
(II) Loading /usr/X11R6/lib/modules/librac.a
(II) Module rac: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) resource ranges after preInit:
[0] 0 0xed000000 - 0xed00ffff (0x10000) MX[B]
[1] 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[2] 0 0xed000000 - 0xed00ffff (0x10000) MX[B]
[3] 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[4] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[5] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[6] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[7] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[8] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[9] -1 0xef000000 - 0xef01ffff (0x20000) MX[B]
[10] -1 0xef021000 - 0xef021fff (0x1000) MX[B]
[11] -1 0xef020000 - 0xef020fff (0x1000) MX[B]
[12] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[13] -1 0xed000000 - 0xed00ffff (0x10000) MX[B](B)
[14] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[15] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] 0 0x00009000 - 0x000090ff (0x100) IX[B]
[19] 0 0x00009000 - 0x000090ff (0x100) IX[B]
[20] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0x0000e000 - 0x0000e03f (0x40) IX[B]
[23] -1 0x0000dc00 - 0x0000dc03 (0x4) IX[B]
[24] -1 0x0000d800 - 0x0000d807 (0x8) IX[B]
[25] -1 0x0000d400 - 0x0000d403 (0x4) IX[B]
[26] -1 0x0000d000 - 0x0000d007 (0x8) IX[B]
[27] -1 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[28] -1 0x0000c800 - 0x0000c807 (0x8) IX[B]
[29] -1 0x0000c400 - 0x0000c41f (0x20) IX[B]
[30] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[31] -1 0x0000a800 - 0x0000a81f (0x20) IX[B]
[32] -1 0x0000a400 - 0x0000a40f (0x10) IX[B]
[33] -1 0x0000a000 - 0x0000a003 (0x4) IX[B]
[34] -1 0x00009000 - 0x000090ff (0x100) IX[B](B)
[35] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[36] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(==) RADEON(0): Write-combining range (0xe0000000,0x1000000)
(WW) RADEON(0): Cannot read colourmap from VGA. Will restore with default
(II) RADEON(0): Starting up Xvideo subsystems
(II) RADEON(0): membase=0xe0000000 memsize=0x04000000 agpSize=0x00000008
(WW) RADEON(0): Direct Rendering Disabled -- Dual-head configuration is not working with DRI at present.
Please use only one Device/Screen section in your XFConfig file.
(II) RADEON(0): Memory manager initialized to (0,0) (1024,4096)
(II) RADEON(0): Reserved area from (0,768) to (1024,770)
(II) RADEON(0): Largest offscreen area available: 1024 x 3326
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using MMIO based acceleration
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
6 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): Using hardware cursor (scanline 3080)
(II) RADEON(0): Largest offscreen area available: 1024 x 3324
(**) Option "dpms" "on"
(**) RADEON(0): DPMS enabled

Fatal server error:
Caught signal 11. Server aborting


When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.

(II) Screen 0 shares mem & io resources
(II) Screen 1 shares mem & io resources
(II) RADEON(0): Shutting down Xvideo subsystems
(II) RADEON(0): membase=0xe0000000 memsize=0x04000000 agpSize=0x00000008

[ilsensine]

Purtroppo allegare file troppo grandi non è possibile, mi dispiace
bzip2 filegrosso.txt
mv filegrosso.txt.bz2 file.txt.bz2.txt (il forum non accetta estensioni bz2)


Fatal server error:
Caught signal 11. Server aborting
signal 11 = SIGSEGV (segmentation fault).
Sei sicuro che xinerama funzioni sulle dualhead? Io sapevo che funzionava con due schede video

[dosaggio]

credo di si perchè leggendo l'how2 di xinerama è scritto di si.
Inoltre leggo nei gruppi di svariate persone con radeon ve (o con matrox, sempre dualhead) che affermano che funziona.

In effetti non so ancora se il bus id che asseggno è giusto, perchè l'opzione -scampci non va. Ero partito assegnando 1:0:0 , tipico dell'agp, ed il sistema rispondeva dicendo di non trovare 1:5:0...allora uso 1:5:0 e il sistema non protesta. Ma non funge lo stesso.

Mi sa che mi tocca cercare e studiarmi un bel pò di roba....inoltre pensavo che forse è il caso di usare il 4.2 (xfree) senza l'acc. 3D, ...il che probabilmente è anche opzionabile nel XF86Config-4 della 4.2 attuale.

Ti farò sapere.
Cmq GRAZIE.

Saluti

[dosaggio]

ok ci sono riuscito :-))

Il config-4 andava benone. Il prob stava probabilmente nell Xfree della mandrake8.2, o nel corretto riconoscimento della scheda video.....infatti ho installato la RH7.3, ho fatto le stesse modifiche al config-4...ET VOILA'...come per magia:-)

Ora ho il dualhead ma anche un problema.
I Font, che normalmente sono guardabilissimi (uso i ttf di w.,freetype2 patched per AA) diventano IGNOBILI quando attivo il DUALHEAD.

Sai per caso perchè ??

Dal log leggo che mi si disattiva il DRI perchè non funziona in dualhead. C'entra qualcosa ??


Grazie.

CIAo.

[ilsensine]

Il config-4 andava benone. Il prob stava probabilmente nell Xfree della mandrake8.2, o nel corretto riconoscimento della scheda video.....infatti ho installato la RH7.3, ho fatto le stesse modifiche al config-4...ET VOILA'...come per magia:-)
Puoi raccontare questa storia a Frederic Lepied ( flepied@mandrakesoft.com ) che cura i pacchetti di xfree per la Mandrake?

Ora ho il dualhead ma anche un problema.
I Font, che normalmente sono guardabilissimi (uso i ttf di w.,freetype2 patched per AA) diventano IGNOBILI quando attivo il DUALHEAD.

Sai per caso perchè ??
Non ho idea. Prova a togliere l'AA.

Dal log leggo che mi si disattiva il DRI perchè non funziona in dualhead. C'entra qualcosa ??
No, ovviamente. Il DRI è il supporto per l'accelerazione 3d.

[dosaggio]

Bene, preparo subito una mail con un paio di attachment per flepied...in effetti abbandonare la mandrake mi spiace.
Anzi, prima di farlo magari riprovo la mandrake (che ho ancora su un altro hd) con un altra scheda video, una matrox (sempre dualhead)....in questo modo posso rendermi conto se si tratta realmente solo di una questione di driver.

No, ovviamente. Il DRI è il supporto per l'accelerazione 3d.

Lo immaginavo,.....ma,dal momento che non me lo carica, mi domandavo se esistesse un qualche tipo di rendering per i font che magari il sistema scarica quando parte in dualhead (perchè non supportato, come il dri).

Ok,cmq. questo è un altro problema....si vedrà.

Intanto ti ringrazio per le risposte tempestive che mi hai fornito.
Non c'è niente di meglio per un principiante che ha voglia di imparare.

Saluti.