PDA

View Full Version : cavo cat 6a compatibile con il modem alice?


mtttt
11-09-2014, 01:25
salve, ho comprato questo cavo di tre metri per connettere il mio portatile al modem alice voip 2 plus



""
RJ45 Snagless and Shielded Ethernet Network LAN Patch Cable
Category 6A: Category 6A Ethernet cable, commonly referred to as Cat6A, is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600MHz and is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) and 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat6, Cat5e and Cat5.

Length: 3m
Colours Available: Yellow, Black, Blue, Red, Grey, Green,
Connectors: RJ45 male to RJ45 male
Type: Patch (Straight Through)
LSZH: low Smoke Zero Halogen cable reduces the amount of toxic and corrosive gas emitted during a fire.
Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet, 10GE (also called 10GbE or 10 GigE) supports a data rate of 10Gbits/s (billion bits per second).
S/FTP (or S/STP): Screened and Foil (Shielded) Twisted Pair. Each individual pair is screened by foil and features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference).
Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation.
Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device.
This product has been tested and found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 and ANSI/TIA-568-C.2
IEC 60332-1-2, RoHS Compliant and 3P Verified
""

.. pensavo non ci fossero problemi di compatibilità ma vedo che ci sono dei problemi es vado molto più lento rispetto a collegarlo con un semplice cavo senza schermatura ..

il cavo acquistato passa dentro una canalina 2 cm per 1,5 insieme al cavo della presa telefonica ..

non riesco a capire forse il jack particolare non è compatibile?

teo180
11-09-2014, 12:25
Il problema non dovrebbe succedere, probabilmente il cavo fallato.
La domanda che vorrei fare invece è: come mai hai acquistato questo cavo? Cosa pensi abbia di più di un comune cat5e? Dato che le porte del router alice sono 10/100?

san80d
11-09-2014, 13:00
La domanda che vorrei fare invece è: come mai hai acquistato questo cavo? Cosa pensi abbia di più di un comune cat5e? Dato che le porte del router alice sono 10/100?

esatto, e anche la schermatura e' inutile

mtttt
11-09-2014, 14:32
Pensavo potesse offrire di piu' in termini di schermatura ..
Il filo passa dentro una canalina e fa tre angoli a 90 gradi praticamente gira intorno ad una colonna portante della casa e in questi punti la plastica e' piuttosto piegata ma non so se dipenda da quello ...

teo180
11-09-2014, 22:02
Sostituisci il cavo con un 5e, fidati è la soluzione più semplice

san80d
11-09-2014, 22:04
Sostituisci il cavo con un 5e, fidati è la soluzione più semplice

quoto, anche perche' e' meno rigido del cat6 e quindi ideale per la tua situazione... e aggiungo prendilo utp e non schermato

mtttt
12-09-2014, 13:08
quoto, anche perche' e' meno rigido del cat6 e quindi ideale per la tua situazione... e aggiungo prendilo utp e non schermato

Perché utp e non schermato? Visto che nella canalina passa anche un cavo del telefono non e' meglio schermato?

san80d
12-09-2014, 15:05
Perché utp e non schermato? Visto che nella canalina passa anche un cavo del telefono non e' meglio schermato?

no, la schermatura in ambito domestico e' al 99% inutile e a maggior ragione se lo si passa con quello telefonico